anko JT-EL-FC3V0.9W-H7 Low Voltage 80LED Christmas Cascading Tree Lights Instructions

anko JT-EL-FC3V0.9W-H7 Low Voltage 80LED Christmas Cascading Tree Lights

Product Information

The Low Voltage 80LED Christmas Cascading Tree Lights are designed for decorative use during the holiday season. The light set comes with a wireless remote control and an AC adapter. It features 8 different light effects and is suitable for indoor use only. The product is rated for low-voltage operation and is constructed with non-replaceable LED bulbs.

Assembly Diagram:

Before using the product, please refer to the assembly diagram provided in the user manual for proper setup and safety instructions.

Product Usage Instructions

1. Ensure that the product is assembled and positioned safely according to the provided instructions.
2. Position the cables and extension leads in a way that they do not pose a hazard to the elderly or children.
3. Avoid placing the light set where it may become covered by items such as curtains, nets, or bedding.
4. Make sure the unit is positioned close enough to reach an indoor mains power socket.
5. To change the light effect, press the button located on top of the AC adapter or use the buttons on the wireless remote control. The available light effects are:
6. Combination
7. In Waves
8. Sequential
9. Slo-Glo
10. Chasing/Flash
11. Slow Fade
12. Twinkle/Flash
13. Steady On
14. Use the buttons on the remote control to change functions:
15. The sensor is in the AC adapter.
16. Press the ON/OFF button to turn the lights on or off.
17. Press the TIMER button to activate a 6-hour on/18-hour off timer function. The green LED on the adapter indicates that the timer function is set.
18. Press buttons 1-2-3-4-5-6-7-8 to change the light effect.
19. Press the DIM+ button to increase the brightness or press the DIM- button to decrease the brightness.
20. Ensure that the supplied adaptor is used for operating the LED modules. Do not connect this light set electrically to another light.
21. Avoid exposing the light set to heat sources, flames, extreme wet weather, or water submersion.
22. Always switch off the light set or unplug the adaptor when it is unattended.
23. Avoid overloading power sockets or extension leads.
24. Take care not to damage the cable or fittings. If any part of the light set or cable is damaged, it must be discarded.
25. This product is for decoration purposes only and should not be used as a toy by children. Keep it out of reach of children.
26. Do not attempt to replace any of the non-replaceable bulbs in the light set.

Wireless Remote Controller:
The wireless remote controller requires 2x AAA batteries (not included). Please follow these instructions:

1. The installation of batteries should be done by an adult.
2. Insert batteries with the correct polarity.
3. Never mix different types of batteries or old and new batteries.
4. Do not short circuit the supply terminals or dispose of batteries in fire.
5. Remove batteries during long periods of non-use.

For additional information, please refer to the packing or product rating label.

Note: The minimum clearance distance from the top and sides of the light set to normally flammable building elements is 225 mm and 300 mm, respectively.

Low Voltage 80LED Christmas Cascading Tree Lights

Assembly Diagram

These instructions are for your safety. Please read through them thoroughly before use and retain for future reference.

Before You Start

• Decide on an appropriate location for your product (see Installation instructions below).
• If you have any doubt about installing this product, consult a qualified electrician.

Installation

1. This light is suitable for INDOOR USE ONLY.
2. The AC adaptor MUST be installed INDOORS away from weather.
3. This light set is constructed with non-replaceable bulbs.
4. Do not position or place near heaters or any other direct sources of heat.
5. This product is suitable for positioning on surfaces which have normal flammability, wood, plasterboard, masonry. this does not include highly flammable surfaces (polystyrene, textiles).
6. Always position cables and extension leads so that they will not be a hazard to the elderly, and children.
7. DO NOT position this light set where it may become covered by other items curtains, nets, or bedding.
8. Ensure the unit is positioned, so that you have enough cable to reach an indoor mains power socket.
9. To change the light effect, simply press the button located on top of the AC Adaptor or on the remote control.
10. COMBINATION
11. IN WAVES
12. SEQUENTIAL
13. SLO-GLO
14. CHASING / FLASH
15. SLOW FADE
16. TWINKLE / FLASH
17. STEADY ON
18. Press the buttons on the remote to change the functions
19. The sensor is in the AC adapter.
20. Press the “ON/OFF” button, the light will be on or off.
21. Press the TIMER button, the light will work for 6 hours, then off for 18 hours. When the Green LED on the adapter means the timer function is set.
22. Press the 1the -2-3-4-5-6-7-8 button, and the light effect will be changed.
23. Press the light will be more (DIM+) or press the DIM-, and the light will be less dim.

Adaptor: The ratings shown on the marking is steady mode, and the input power is up to 0.9 other modes see below:

• PRI: 220-240V~ 50-60Hz 0.12A
• Unrated : 3V~
• Uout: 4.5V~ Prated Max 0.9W.

Warning

1. This product is NOT designed for continuous or permanent use.
2. The supplied adaptor is suitable for operation of LED Modules only.
3. Only operate this light set with the supplied adaptor,
4. Model No.: JT-EL/FC3V0.9W-H7
5. Do not connect this light electrically to another light.
6. Do not connect this light to the power supply while it is in the packaging.
7. DO NOT attempt to replace the non-replaceable bulbs in this light.
8. Never allow any part of the light set to encounter a source of heat or flame.
9. Care must be taken to avoid damage the cable or fittings.
10. If any part of light set or cable is damaged, the light set MUST be discarded.
11. This product is for use as a decoration only. Not to be used by children as a toy. Keep out of reach of children.
12. Do not position this light where it will be exposed to extreme wet weather or submerged in water.
13. Always switch off this light set or unplug an adaptor if unattended.
14. DO NOT overload power sockets or extension leads.
15. DO NOT pierce the cable when securing in place, as this will damage the bulbs or wiring.
16. Please refer to the packing or product rating label for product class, specifications, and rating.

Wireless Remote controller

1. Requires (2x AAA), they are not included.
2. Batteries installation by an adult is required.
3. Insert batteries with the correct polarity.
4. NEVER MIX DIFFERENT TYPES OR OLD AND NEWBATTERIES.
5. DO NOT SHORT CIRCUIT SUPPLY TERMINALS OR DISPOSE OF BATTERIES IN FIRE. 6．REMOVE BATTERIES DURING LONG PERIOD OF NON-USE.

LED Bulbs
This light set is constructed with non-replaceable bulbs. DO NOT attempt to replace any of the bulbs in the light set.

Adaptor Manual

1. Do not open the cover of the equipment.
2. The power supply is suitable for LED modules.
3. The input and output voltage should be checked before us e to ensure correct use.
4. This is the Class ll product, JT-EL/FC3V0.9W-H7 is only for indoor use.
5. The product is not a toy, keep it where children reach.
6. The lamp does not rely upon the luminaire enclosure for protection against accidental contact with live parts.
7. The adaptor is for socket mounted only. Not for Recess Use.
8. The minimum clearance distance from the top and sides o f the to normally flammable building elements is 225 mm and 300 mm.
9. The minimum clearance distance from the top and sides of the control to normally flammable building elements.
10. If the minimum clearance distances from each side of the are different, or there are different minimum clearance distances for various types of normally flammable building element or building insulation, then each minimum clearance distance shall be stated separately.
11. Where is required to be mounted on a specific surface or has additional installation requirements, for in non-combustible enclosed space or to ensure adequate sealing to maintain its IP rating, the relevant information shall be supplied with the

NOTE: Installation in a non-combustible enclosed space may include installation in a rebate in a concrete slab,or wall.

Diagram:

Documents / Resources

| anko JT-EL-FC3V0.9W-H7 Low Voltage 80LED Christmas Cascading Tree Lights [pdf] Instructions
JT-EL-FC3V0.9W-H7 Low Voltage 80LED Christmas Cascading Tree Lights, JT-EL- FC3V0.9W-H7, Low Voltage 80LED Christmas Cascading Tree Lights, Christmas Cascading Tree Lights, Cascading Tree Lights, Tree Lights
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>