Yale YAR-WSWA-1-BLK Window Control System User Guide
- June 13, 2024
- Yale
Table of Contents
Yale YAR-WSWA-1-BLK Window Control System
Product Information
The product is a window automation system that consists of actuators, power supply, hub, remote, and optional rain sensor. The system allows for the automatic opening and closing of windows based on specified conditions.
Actuators
- YAR/WSWA/1/BLK – Single actuator for windows up to 900mm wide
- YAR/WSWA/1/P – Actuator with power consumption of 0.5W
- YAR/WSWA/1/SPEC – Actuator with power consumption of 0.2W for windows between 900mm and 2400mm wide
Power Supply
The power supply has a wattage of 0.5W and can power up to two actuators. For double actuator windows, the same power supply must be used for both actuators.
Sync Loom
A synchronisation loom is required for each double actuator installation.
Hub
The Connect Plus Hub 2 can connect up to 30 actuators and 4 remotes.
Remote
A maximum of 4 remotes can be used per system.
Rain Sensor & Adaptor
An optional rain sensor and adaptor can be specified. Only one rain sensor is allowed per system.
Product Usage Instructions
- Step 1: Specify the required number and type of actuators based on the window size:
- If the window is less than 900mm wide, specify one actuator using YAR/WSWA/1/BLK.
- If the window is between 900mm and 2400mm wide, specify two actuators – one with YAR/WSWA/1/P and another with YAR/WSWA/1/SPEC.
- Step 2: Specify the power supply:
- Use a 0.5W power supply for a single actuator window.
- For double actuator windows, use the same power supply for both actuators.
- Step 3: Specify the Connect Plus Hub 2 for connecting the actuators and remotes. Specify the required quantity.
- Step 4: Specify the number of remotes needed (maximum 4 per system).
- Step 5: (Optional) If desired, specify a maximum of one rain sensor and adaptor per system.
Specification Guide
Step 1. Specify Actuators
- Specify one actuator for window less than 900mm:
Actuators
- YAR/WSWA/1/BLK YAR/WSWA/1/P YAR/WSWA/1/SPEC
QTY
- Specify two actuator for windows between 900mm and 2400mm
Actuators
- YAR/WSWA/1/BLK YAR/WSWA/1/P YAR/WSWA/1/SPEC
QTY
-
Specify one synchronisation loom for each double actuator installation
-
Sync Loom YAR/SWAA/SSL
-
Total number of actuators (A+B)
-
Total number of synchronisation looms
Step 2. Specify Power Supply
- One power supply can power up to two actuator.
- For double actuator windows, the same power supply must be used for both actuators.
Power Supply
- YAR/SWAA/SPS QTY:
Step 3. Specify Hub
- One Hub can connect up to 30 actuators and 4 remotes
Connect Plus Hub 2
- YAR/SWAA/HUB QTY:
Step 4. Specify Remote
- 4 Remotes maximum per system
Remote
- YAR/SWAA/ZRT QTY:
Step 5. Specify Rain Sensor & Adaptor (coming soon)
- Optional. Specify maximum one rain sensor per system
Rain Sensor and Adaptor
- YAR/SWAA/SRS QTY:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>