KOHLER K-2593-GH Archer Heated BubbleMassage Air Bath User Guide
- June 13, 2024
- Kohler
Table of Contents
KOHLER K-2593-GH Archer Heated BubbleMassage Air Bath
Codes/Standards
ASME A112.19.7/CSA B45.10
CSA B45.5/IAPMO Z124
ASTM E162
ASTM E662
UL 1795
CSA C22.2 No. 218.2
KOHLER® Plastic Baths and Shower Bases Lifetime Limited Warranty KOHLER®
Hydrotherapy Components Five-Year Limited Warranty
See website for detailed warranty information.
Features
- 118 to 122 air jets release thousands of heated bubbles that surround and support the body in a warm massage
- Automatic and manual purge cycles remove residual water from air channels after use
- Variable-speed blower lets you adjust massage intensity to 18 levels
- Freestanding design creates a striking focal point in your bathing area
- Integral lumbar support
- Slotted overflow allows for deep soaking
- Coordinates with other products in the Archer collection
- Built-in 600W BubbleMassage™ heater warms humidified air before it enters the bath
- Automatic and manual purge cycles remove residual water from air channels after use
Material
- Acrylic
Technology
- Auto-shutoff timer on blower allows users to enjoy Heated BubbleMassage™ experience for 60 minutes before turning off
- User interface: electronic keypad control
Installation
- Reversible drain
- Freestanding
- End ledge allows for deck-mounting capabilities for faucets
- PureFlo drains are not recommended for a deck-mount faucet installation
Required Products/Accessories
K-7271 Brass Slotted Overflow Bath Drain
or
K-7272 PVC Slotted Overflow Bath Drain
Recommended Products/Accessories
K-23726 Drain treatment
K-23732 Tub & shower cleaner
K-31797 Slotted overflow bath drain kit
K-31795 Slotted overflow above-the-floor bath drain kit
Dimension
Required Electrical Service
Two dedicated circuits required, protected with Class A Ground Fault Circuit-
Interrupter (GFCI). Outside North America, this device may be known as a
Residual Current Device (RCD).
Blower: 120 V, 15 A, 60 Hz
Heater: 120 V, 15 A, 60 Hz
Technical Information
Installation: Freestanding
Drain location: Reversible
Basin area, bottom: 45-1/8″ x 19-11/16″ (1146 mm x 500 mm)
Basin area, top: 52-3/4″ x 25-5/16″ (1340 mm x 643 mm)
Weight: 105 lbs (47.6 kg)
Minimum floor load: 43.8 lbs/ft² (213.9 kg/m²)
Water depth: 15-1/16″ (383 mm)
Water capacity: 58 gal (219.6 L)
Template: Footprint, 1265460, not required, not included
Electrical component rating: Blower: 120 V, 10 A, 60 Hz 1-800-4KOHLER
(1-800-456-4537)
Notes
Measure your actual product for rough-in details.
Install this product according to the installation instructions.
The hot water supply should be 70% of the capacity of the bath or greater.
Installations will vary.
This bath is designed for freestanding installation only.
If installing a rim-mount faucet, make sure there is no interference above or
below the deck before drilling any holes.
Customers Support
Kohler Co. reserves the right to make revisions without notice to product
specifications.
For the most current Specification Sheet, go to
www.kohler.com.
8-9-2023 23:34 – US/CA
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>