TELEPHONE 2IHPP2058 Wireless Charging Selfie Grip with 5000mAh Portable Powerbank Owner’s Manual
- June 13, 2024
- TELEPHONE
Table of Contents
TELEPHONE 2IHPP2058 Wireless Charging Selfie Grip with 5000mAh Portable
Powerbank
Product Information
- Product Name: Wireless Charging Selfie Grip with 5000mAh
- Portable Power
- Model: 2IHPP2058
- Package Contents:
- Selfie Grip wireless charger power bank
- User Manual
- USB to USB-C charging cable
- Product Introduction: The Wireless Charging Selfie Grip is a multi-functional mobile phone stand that supports Bluetooth connection for your iPhone to take photos. It also comes with a 5000mAh power bank for iPhone magnetic charging.
- Compatible Devices: This product is compatible with Apple iPhone 12, 12 Pro, 12 Pro Max, 12 mini, iPhone 13, 13 Pro, 13 Pro Max, 13 mini, iPhone 14, 14 Plus, 14 Pro, and 14 Pro Max.
Product Usage Instructions
- Ensure the product is fully charged before first use.
- To use the Wireless Charging Selfie Grip as a mobile phone stand, extend the grip and adjust it to a suitable angle for your needs.
- To connect your iPhone via Bluetooth for taking photos, follow these steps:
- Turn on the Bluetooth function on your iPhone.
- Press and hold the Bluetooth button on the Selfie Grip until the indicator light starts flashing.
- On your iPhone, search for available Bluetooth devices and select the Selfie Grip from the list.
- Once connected, you can use the Selfie Grip’s buttons or remote control to take photos.
- To charge your iPhone wirelessly using the Selfie Grip’s power bank, follow these steps:
- Connect the USB to USB-C charging cable to the Selfie Grip’s Type C port.
- Plug the other end of the cable into a power source.
- Place your iPhone on the wireless charging pad of the Selfie Grip.
- The wireless charging will start automatically, and the indicator light will turn on.
- Note that the Type C port on the Selfie Grip can be used as an input or output, but not simultaneously.
- The product will automatically detect whether it is being used for input or output when you connect a device.
- Ensure the working environment temperature is between -10°C to 40°C for optimal performance.
Product Specification
- Product Size: 121.5 x 91 x 40mm
- Product Material: ABS
- Input/Output: TYPE C (Use as input or output can’t be used at the same time)
- Type C Input Voltage Current: 5V 2A, 9V 2A, 12V 1.5A
- Type C Output Voltage Current: 5V 3A, 9V 2A, 12V 1.5A
- Wireless Charging Power: 5W, 7.5W
- Wireless Charging Conversion Rate: 65%
- Transmission Distance: 3mm
- Battery Capacity: 5000mAh
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: This device may not cause harmful interference
and This device must accept any interference received, including interference
that may cause undesired operation. Warning: Changes or modifications not
expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
RF Warning Statement
The device has been evaluated to meet general RF exposure requirements. The
device can be used in a portable exposure condition without restriction.
Package Contents
- Selfie Grip wireless charger power bank
- User Manual
- USB to USB-C charging cable
duct Introduction
Multi-functional mobile phone stand supports Bluetooth connection for your
iPhone to take photos and comes with a 5000mAh power bank for iPhone magnetic
charging. Compatible Devices
For Apple iPhone 12, 12 Pro, 12 Pro Max, 12 mini, iPhone 13, 13 Pro, 13Pro
Max, 13mini, iPhone 1414Plus, 14 Pro, 14 Pro Max
Product Function Introduction
- The product can be charged with 5V 2A, 9V 2A, 12V 1.5A adapter. Four blue indicators represent the battery power of 25%-50%-75%-100% and the four lights turn on blue when fully charged.
- Press the power button then the green indicator light on breathing. You can place the phone in the wireless charging area to automatically charge the phone. lf the green light flashes continuously means the foreign metal object is detected (charging will automatically stop).
- If 42 seconds without load on the charging area, the product will enter a low-power consumption state.
- Press the power button once, You can place the phone in the wireless charging area, if The blue indicators show enough power, you can also use a charging cable to charge the mobile phone. Double press the power button to turn off the charging output function, there is no power output when the green indicator is off.
- Press the camera button for 3 seconds and the red Bluetooth indicator will blink, and the Bluetooth function will be enabled. Please find and select the device name Mag Selfie Pro on the Bluetooth connection page of your phone. When the pairing is successful, the red light will stay on, and you can use the product to take photos by clicking the camera button.
- If you want to turn off the Bluetooth connection, please hold the camera button for 3 seconds then the red light will flash in 3 seconds and turn off.
Notice: Although Type C port can be used as input or output, it cannot be used at the same time. Inserting the Type C port, the product will automatically determine whether it is an output or input mechanism and enter the working state. Working environment temperature -10℃-40℃.
Product Specification
- Product Size: 121,5X91X40mm
- Product Material: ABS
- Input/Output: TYPE C (Use as input or output can’t be used at the same time)
- Type C Input Voltage Current: 5V 2A, 9V 2A, 12V 1.5A
- Type C Output Voltage Current: 5V 3A, 9V 2A, 12V 1.5A
- Wireless Charging Power: 5W 7.5W
- Wireless Charging Conversion Rate: 65%
- Transmission Distance: 3mm
- Battery Capacity: 5000mAh
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: This device may not cause harmful interference,
and This device must accept any interference received, including interference
that maycause undesired operation. Warning: Changes or modifications not
expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a ClassB digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference in radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement
The device has been evaluated to meet general RF exposure requirements. The
devicecan be used in portable exposure condition