SwitchBot SBT_W240000-UW Smart Curtain Motor User Manual
- June 13, 2024
- SwitchBot
Table of Contents
SwitchBot
Curtain Rod 3
User Manual
SBT_W240000-UW Smart Curtain Motor
Please read this user manual carefully before using the device.
Package Contents
List of Components
Preparation
- Asmartphone or tablet using Bluetooth 4.2 or later.
- The latest version of our app, downloadable via the Apple App Store or Google Play Store.
- A SwitchBot account, you can register via our app or sign in to your account directly if you already have one.
- Afully charged SwitchBot Curtain.
Please note: If you intend to use Cloud Services for voice control, you will need a SwitchBot Hub (sold separately).
https://apps.apple.com/cn/app/switchbot/id1087374760https://play.google.com/store/apps/details?id=com.theswitchbot.switchbot&hl=en
Check your Curtain Track
SwitchBot Curtain Rod 3 supports curtain track with the following
measurements: If SwitchBot Curtain Rod 3 does not fit your curtain track,
please contact our customer support at support@switch-bot.com
Installation
Step 1: Add your SwitchBot Curtain Rod 3 to our app
Open our app and sign in to your account. Tap “+” at the top right-hand corner
of the home page, find the Curtain icon, and select. Then follow the
instructions to add your SwitchBot Curtain Rod 3.
Step 2: Install SwitchBot Curtain Rod 3 onto your curtain track
-
Ring Top Curtains
1 Fully close your curtain and remove the first curtain hook from the ring.
2 Install two detachable Hooks one by
one onto your curtain rod between the first and the second ring. 3 Pull one
detachable Hook downwards with one hand, and hold the Main Unit (with the
SwitchBot logo on it facing indoors) upwards against the rod with another
hand. Align the snaps and attach the Main Unit to the Hook, You will hear a
clicking sound when firmly attached.
Then attach another Hook to the Main Unit.
Please note: do not apply excessive force when pulling the Hook downwards without supporting your rod, or your rod may break or detach from your wall.
4 Adjust your SwitchBot Curtain Rod 3
to keep. it perpendicular to the ground. Hang your curtain back in place and
hide SwitchBot Curtain Rod 3 behind your curtain fabric. -
Grommet Curtains
1 Install your SwitchBot Curtain Rod 3 at the back of this type of curtain. 2 Install two detachable Hooks one by one onto your curtain rod between the first and the second ring. 3 Pull one detachable Hook downwards with one hand, and hold the Main Unit (with the SwitchBot logo on it facing indoors) upwards against the rod with another hand. Align the snaps and attach the Main Unit to the Hook. You will hear a clicking sound when firmly attached.
Then attach another Hook to the Main Unit.
Please note: do not apply excessive force when pulling the Hook downwards without supporting your rod, or your rod may break or detach from your wall.
4 Adjust your SwitchBot Curtain Rod 3
to keep it perpendicular to the ground. 5 Refer to the pictures below to
install the beads fixer (with beads installed) at the top of the grommets.
Make sure that you clip them to the grommets firmly. Finish by cutting the
remaining beads or put it behind your curtains.
If the distance between the clips does not fit your
curtains, you can adjust them as shown below.
-
Tab Top Curtains
Use the clips provided to help install your SwitchBot Curtain Rod 3 on tab top curtains. Close your curtain, attach a clip on the first tab. Attach the remaining clips on other tabs as shown in the picture.
Beware that all other clips should be attached the
opposite way against the first clip, make sure all the clips are sitting on
the top of the rod and are aligned with each other.
1 Install your SwitchBot Curtain Rod 3 at the back of this
type of curtain. 
2 Install two detachable Hooks one by
one onto your curtain rod between the first and the second ring. 3 Pull one
detachable Hook downwards with one hand, and hold the Main Unit (with the
SwitchBot logo on it facing indoors) upwards against the rod with another
hand. Align the snaps and attach the Main Unit to the Hook. You will hear a
clicking sound when firmly attached Then attach another Hook to the Main Unit.
Please note: do not apply excessive force when pulling the Hook downwards without supporting your rod, or your rod may break or detach from your wall.
4 Adjust your SwitchBot Curtain Rod 3
to keep it perpendicular to the ground. -
Back Tab Curtains
Use the clips provided to help install your SwitchBot Curtain Rod 3 on back tab curtains.
Attach the remaining clips on other tabs as shown in the picture.
Beware that all other clips should be attached the
opposite way against the first clip, make sure all the clips are sitting on
the top of the rod and are aligned with each other.
-
Install your SwitchBot Curtain at the back of this type of curtain.
-
Install two detachable Hooks one by one onto your curtain rod between the first and the second ring.
-
Pull one detachable Hook downwards with one hand, and hold the Main Unit (with the SwitchBot logo on it facing indoors) upwards against the rod with another hand. Align the snaps and attach the Main Unit to the Hook. You will hear a clicking sound when firmly attached.
Then attach another Hook to the Main Unit.
Please note: do not apply excessive force when pulling the Hook downwards without supporting your rod, o your rod may break o detach from your wall.
-
Adjust your SwitchBot Curtain Rod 3 to keep it perpendicular to the ground.
Step 3: Install Magnet Attachment
The magnet attachment will help your SwitchBot Curtain run precisely to close
your curtains in future operation. Follow the steps below to install the
magnet attachment before route calibration.
To ensure the magnet attachment firmly attaches to your track surface, please
use the wet wipe provided to clean the surface first. Dirt or dust will affect
adhesion and may cause dropping at a later time.
Situation 1: A rod bracket is at the closed position.
-
Remove the magnet attachment from the liner. Stick it to the bottom of the rod along the bracket, with the magnet piece inside paralle! with the rod.
If you use double-sided curtains, stick two magnet attachments along both sides of the middle bracket symmetrically. holding the rod.
-
Pull your SwitchBot Curtain, make it oll onto the magnet attachment and stop within the area as shown in the picture.
-
Hide your SwitchBot Curtain behind your fabric curtain to finish.
Situation 2: Double-sided curtains without abracket in the middle.
-
Fully close your curtains. Use the red long sticker to mark the middle position.
Please note: only using your eyes to measure the position may cause deviation. Please be sure to use the provided sticker.
-
Open your curtains. Peel off the tape liners of your magnet attachments, and stick them along both sides of the dotted line symmetrically.
Please note:
a. Two magnet attachments need to be close to each other, wrapping the rod at the bottom.
b. The magnet pieces inside the attachments need to be parallel with the rod. -
Pull your two SwitchBot Curtain devices separately, make them roll onto the magent attachment and stop within the area as shown in the picture.
Step 4: Calibration
After you have added and installed SwitchBot Curtain Rod 3, you will need to
calibrate your device to set its route on your curtain track.
Please follow the instructions in our app to make sure that the actual
movement of your curtain is the same as the animation in the app. You can
choose to recalibrate your device or change its opening direction whenever you
want by’ navigating to Curtain > Settings > Calibration Please note: You can
group two SwitchBot Curtain Rod 3 units together should you plan to open your
curtains from the middle. Before you calibrate, please make sure the positions
of both devices are the same as shown in our app.
Control Methods
App Control
Open and close your curtains with just the tap of a button. We offer intuitive
app control for i0S and Android users, with weekly/bi-weekly updates. OTA
firmware updates are also available to give you a better user experience.
Touch & Go
When SwitchBot Curtain Rod 3 senses you drawing your curtain (more than 5 cm
in distance), your device will automatically open or close depending on where
your device is. For double-sided curtains, you only need to pull one side to
activate. Please note: you can turn this feature off n the Advanced Settings
page of your device at any time.
*5cm lowers the possibility of false triggers by foreign objects, pets, children, etc.
*Home Automation Using Voice Commands
** You can link multiple third-party smart assistants to your SwitchBot
account to control your SwitchBot Curtain Rod 3 or trigger Scenes using voice
commands.
How to realize voice control and home automation:
- Connect your smartphone or tablet to the Internet.
- Setup a SwitchBot Hub (sold separately).
- Turn on Cloud Services via SwitchBot Curtain’s Settings page.
- Link third-party services to your SwitchBot account.
Alexa, close the curtains.
Hey Google, close my bedroom curtains.
Hey Siri, open the living room curtains.
- SwitchBot Hub required (sold separately)
Using Your Device with SwitchBot Remote A wireless remote to place anywhere.
You can also control your SwitchBot Curtain using SwitchBot Remote (sold separately) with two buttons located on the remote that can be set as an action via our app. One Remote can also control 2 SwitchBot Curtain devices that have been grouped. Please refer to the user manual of Remote for more information.
Device Settings
Light Sensor (Solar Panel)
By connecting your SwitchBot Curtain Rod 3 to the SwitchBot Solar Panel 3
(sold separately), you can set up automations based on the light level data.
The light level curve will tell you the optimal time period of sunlight in a
day and you can set the automatic charging schedule accordingly for your
SwitchBot Curtain Rod 3.
Delay
You can set a delay for a countdown action including countdown time,
percentage of opening or closing, and Motion mode.
Schedules
You can set up to 5 Schedules locally on your device, or unlimited Schedules
when used with a SwitchBot Hub. You are able to set the day, time, percentage
of opening or closing, and Motion mode.
Charging, Firmware Upgrades, and Resetting Factory Settings
Charging
It takes about 6.5 hours to fully charge your device battery and this can last
for up to 8 months after one full charge. You may also purchase SwitchBot
Solar Panel to charge using sunlight.
- A5V=1A adapter is required to charge your device.
- Battery life s tested by opening and closing 8kg (17 Ibs) curtains on a 3-meter-long track once a day under temperature conditions of 25°C. Actual battery life may vary depending on different conditions.
- With only 3 hours per day exposed under sunlight that can cast clear shadow, SwitchBot Solar Panel can generate sufficient power to sustain your SwitchBot Curtain Rod 3 forever.
The upgraded Solar Panel greatly improved efficiency even under weak sunlight. As long as your window can receive sunlight, we recommend purchasing our Solar Panel to charge your device. This way, you can ensure that your SwitchBot Curtain Rod 3 remains powered and ready to use whenever you need it.
Firmware Upgrades
In order to improve user experience, we will regularly release firmware
updates to introduce new functions and solve any software defects that may
occur during usage. When a new.
firmware version is available, we will send an upgrade notification to your
account via our app.
When upgrading, please make sure your product has sufficient battery and make
sure your smartphone is within range to prevent interference.
Resetting Factory Settings Use the reset tool provided to press and hold
the Reset button for 3 seconds until the indicator light is visible and then
release.
Specification
Model: W2400000
Color: White
Material: ABS + PC (Anti-UV, fire-resistance rating V-0)
Size (Main Unit): 42 x 51 x 173 mm (1.7x2x6.8in.)
Weight (Main Unit): 280 g (9.9 0z.)
Power: Type-C, DC 5V=1A, 3350 mAh lithium-ion battery or by Solar Panel’
Battery Life: 8 months® or unlimited with Solar Panel
Network Connectivity: Bluetooth 5.0, long range transmission
Strength: Supports curtain of up to 15 kg (33 Ibs) (from controlled
experiments in our lab)
Max Runway: 3 m (9.8 ft.)
Schedule: Up to 5, or unlimited with a SwitchBot Hub?
Voice Control (SwitchBot Hub Required): Amazon Alexa, Google Assistant, Siri
Shortcuts, SmartThings, IFTTT
Please note: we recommend using your device in room temperature
conditions only.
- SwitchBot Solar Panel is sold separately.
- Battery life tested under conditions of opeing and closing a 8 kg (17 Ibs) curtain on a 3-meter-long track once a day at a temperature of 25 °C. Actual battery life may vary.
- SwitchBot Hub sold separately.
Wewarrant to the original owner of the product that the product wil be free from defects in materials and workmanship. Please note that this limited warranty does not cover:
- Products submitted beyond the original limited warranty period.
- Products on which repairs or modifying have been attempted.
- Products subjected to falls, extreme temperatures, water, or other operating conditions outside the product specifications.
- Damage due to natural disaster (including but not limited to lightning, flood, tornado, earthquake, or hurricane, etc.).
- Damage due to misuse, abuse, negligence or casualty (e.g. fire).
- Other damage that is not attributable to defects in the manufacture of product materials.
- Products purchased from unauthorized resellers.
- Consumable parts (including but not limited to batteries).
- Natural wear of the product.
Contact & Support
Setup and Troubleshooting: support.switch-bot.com
Support Email: support@switch-bot.com
Feedback: Ifyou have any concerns or problems when using our products, please
send feedback via our app through the Profile > Help & Feedback page.
Find Out More
Please visit support.switch-bot.com for more
details.
https://support.switch-bot.com/hc/en-us/articles/7909829940503
CE/UKCA Warning
To comply with RF exposure requirements, a minimum separation distance of 20
cm must be maintained between the user’s body and the device, including the
antenna. Use only the supplied or an approved antenna.
This device is in compliance with the essential requirements and other
relevant provisions of directive 2014/53/EU. All essential radio test suites
have been carried out.
CEDOC
Hereby, Woan Technology (shenzhen) Co, Ltd. declares that the radio equipment
type W2400000 is in compliance with Directive 2014/53/EU. The full text of the
EU declaration of conformity s available at the following internet address:
support.switch-bot.com
UKCADOC
Hereby, Woan Technology (henzhen) Co, Ltd.
declares that the radio equipment type W0701600 is in compliance with UK Radio
Equipment Requlations (512017/1206). The full text of the UK declaration of
conformity is available at the following internet address: support.switch-
bot.com
“This product can be used in EU member states and UK.
Manufacturer: Woan Technology (Shenzhen) Co,, Ltd.
Address: Room 1101, Qiancheng Commercial Center, No. 5 Haicheng Road, Mabu
Community, Xixiang Subdistrict, Bao’an District, Shenzhen, Guangdong,
PR.China, 518100
Operation Frequency: Max RF output power
Bluetooth: 2402 MHz to 2480 MHz (~1.42 dBm)
FCC Warning
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user s encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications o this equipment. Such
modifications could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimunn distance 20 cm between the radiator and your body.
IC Warning
This device complies with CAN ICES-003 (BYNMB-003(8).
This device complies with Industry Canada licence- exempt RSS standard(s).
Operation is subject to the following two conditions:
- this device may not cause harmful interference.
- this device must accept any interference received, including interference that may cause undesired operation
IC Radiation Exposure Statement
This equipment complies with the IC radiation exposure limits established for
uncontrolled environment. This equipment must be installed and operated at
least 20 cm from a radiator or your body.
www.switch-bot.com
V122307
Documents / Resources
|
SwitchBot SBT_W240000-UW Smart Curtain
Motor
[pdf] User Manual
SBT_W240000-UW, SBT_W240000-UW Smart Curtain Motor, Smart Curtain Motor,
Curtain Motor, Motor
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>