Thermador T36BB110SS Built-in Bottom Freezer Refrigerator Owner’s Manual

: June 13, 2024
: Thermador

Table of Contents

Thermador T36BB110SS Built-in Bottom Freezer Refrigerator
Product Information
Product Usage Instructions
FEATURES & BENEFITS
FLUSH INSTALL CUTOUT DIMENSIONS
FLUSH INSTALL TOP VIEW CLEARANCES
WARRANTY
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Thermador T36BB110SS Built-in Bottom Freezer Refrigerator

Product Information

Model: T36BB110SS
Type: Built-in bottom freezer refrigerator with 2 drawers
Pre-assembled
Home ConnectTM enabled for Wi-Fi connectivity
Flex Drawer for customizable storage
Carbon Air Filter for improved air quality
Ethylene Filters (2) to help preserve fresh foods longer
Top and sidewall LED theater lighting for bettervisibility
Dual compressors and evaporators for optimal cooling performance
4 glass shelves with metal profiles
7 managed drawers with non-slip mats
1 automatic freezer drawer
Internal water dispenser with water filter
SoftClose Door for gentle closing
Ice Maker with Diamond Ice System for high-quality ice production
Door Open Alarms to alert when the door is left open
Special Modes: Sabbath, Economy, Vacation, Theater
Total Capacity: 19.0 cu. ft.
Refrigerator Capacity: 12.8 cu. ft.
Freezer Capacity: 6.2 cu. ft.
Current: 15 A
Volts: 110-120 V
Frequency: 60 Hz
Power Cord Length: 118 inches
Plug Type: 120V-3 Prong
Appliance Dimensions (H x W x D): 83 9/16 x 35 3/16 x 24 3/4 inches
Flush Install Cutout Size (H x W x D): 84 x 36 x 25 inches
Proud Install Cutout Size (H x W x D): 84 x 35 1/2 x 24 inches
Net Weight: 541 lbs.
Gross Weight: 587 lbs.
Annual Energy Consumption: TBD*

Product Usage Instructions

Before installation, ensure that the cabinet meets the specified dimensions for a flush or proud install.
If performing a flush install, remove the pre-assembled frameto achieve a fully flush integrated look.
For electrical supply, it is recommended to have an outletlocated in an adjacent cabinet for safety and serviceability. If not possible, connect the appliance to a power outlet behind it, ensuring the outlet can be switched off with a circuit breaker in the fuse box.
For water supply, it is recommended to have a water supplylocated in an adjacent cabinet or accessible area after installation.
When opening the refrigerator door, the case interior will be partially visible. Ensure that the top and side returns are finished to match the exterior furniture at a minimum depth of 4 inches. The side walls of the cutout should becompletely flush toa depth of at least 4 inches.
Refer to the user manual for instructions on using different settings and modes such as Sabbath, Economy, Vacation, andTheater.

FEATURES & BENEFITS

ThermaFresh® Pro drawers optimize temperature and humidity, preserving fresh foods longer than traditional drawers
Intuitively customize settings with the redesigned full-color touchscreen control panel. Wi-Fi connectivity enables additional control settings with the Home Connect® app.
Flex drawer can be utilized as an additional refrigerator or freezer space for maximum versatility
Elevated ice maker produces signature Diamond Ice, and an internal water dispenser provides convenience
See what’s inside without opening the door with cameras located in the refrigerator compartment
Includes trim and frame kit

TEMPERATURE RANGES

Refrigerator| 33°F (1°C) to 43°F (6°C)
SuperCool| 34°F (1°C) for

Approximately 6 Hours

Energy Saving (Economy) Mode| Refrigerator: 43°F (6°C) Vitafresh: 37°F (3°C)
Freezer| -7°F (-22°C) to 6°F (-14°C)
SuperFreeze®| -15°F (-26°C) for

Approximately 8 Hours

Flex Drawer| 0°F (-18°C) to 39°F (4°C)
Preset Drawer Temperatures| Freezer, Soft Freeze, Refrigerator,

Beverages, Meat/Fish, Deli/Cheese, Cake

GENERAL PROPERTIES

60 Hz

Power Cord Length (in.)| 118
Plug Type| 120V-3 Prong
DIMENSIONS & WEIGHT
Appliance Dimensions (H x W x D) (in.)| 83 9/16″ x 35 3/16″ x

24 3/4″

FLUSH INSTALL CUTOUT DIMENSIONS

Thermador-T36BB110SS-Built-in-Bottom-
Freezer-Refrigerator-fig-1

PLANNING NOTES
Recess Depth: The refrigerator is fully flush integrated when installed in a 25″ (635mm) deep cabinets with a typical panel thickness of 3/4″ (19mm). Recess depth depends on kitchen design and panel thickness. Remove the pre- assembled frame for flush installation.
Electrical Supply: The electrical supply outlet (A) is recommended to be located in an adjacent cabinet for safety and serviceability. If it is not possible due to the construction to connect the appliance to a power outlet next to it (A), connect the appliance to a power outlet behind the appliance (B). This alternative position of the power outlet is permissible only if you can switch off the outlet with a circuit breaker in the fuse box.
Water Supply: The water supply is recommended to be located in an adjacent cabinet or other area that can be accessed after the appliance is installed.
Furniture Return: The case interior will be partially visible when the refrigerator door is opened (C). Top and side returns should be finished to matchthe exterior furniture at a minimum depth of 4″ (102 mm). Ensure that the side walls of the cutout (C) are completely flush to a depth of at least 4″ (102 mm).

FLUSH INSTALL TOP VIEW CLEARANCES

Thermador-T36BB110SS-Built-in-Bottom-
Freezer-Refrigerator-fig-2

PLANNING NOTES
Door Panels & Handles: Clearance dimensions are based on a door panel (A) thickness of ¾” (19mm). Additional clearances must be added for handles and door panels thicker than ¾” (19mm). Clearance Requirements: The required clearances for the maximum door opening angle of 115˚ should be followed. The minimum required clearance to fully access all compartments is 90˚ door opening (B).

PROUD INSTALL CUTOUT DIMENSIONS

PLANNING NOTES
Width: The minimum required cutout width is 35 1/2″ (900 mm).
Depth: The minimum required cutout depth is 24″ (610 mm). The refrigerator door panels will protrude slightly for a proud install.
Electrical Supply: The electrical supply outlet (A) is recommended to be located in an adjacent cabinet for safety and serviceability. If it is not possibledue to the construction to connect the appliance to a power outlet next to it (A), connect the appliance to a power outlet behind the appliance (B). This alternative position of the power outlet is permissible only if you can switch off the outlet with a circuit breaker in the fuse box.
Water Supply: The water supply is recommended to be located in an adjacent cabinet or other area that can be accessed after the appliance is installed.
Furniture Return: The metal frame hides unfinished case returns for existing cabinetry that has not been custom built to accommodate the appliance. Ensure that the side walls of the cutout (C) are completely flush to a depth of at least 4″ (102 mm).

PROUD INSTALL TOP VIEW CLEARANCE

PLANNING NOTES
Adjustable Height: The appliance height is adjustable. Recommended height for a standard 84″ niche is 83 7/8″. The minimum height with leveling legs fully retracted is 83 9/16″. The maximum height with leveling legs fully extended is 85 1/2″.
Rear Appliance Recess: The recessed area at the base can be used for routing water and electric supply lines to the appliance.

ACCESSORIES (OPTIONAL)

WARRANTY

Limited, Entire Appliance, Parts and Labor on Any Part of the Refrigerator that Fails Because of a Manufacturing Defect 2 Year
Limited Warranty for Sealed Refrigeration System; Parts and Labor 3rd to 6th Year
Limited Warranty for Sealed Refrigeration System; Parts Only 7th to 12th Year
Limited Warranty for Stainless Steel Rust-Through Lifetime

Sealed refrigeration system includes compressor, evaporator, condenser, dryer / strainer and connection tubing

These warranties give you specific legal rights and you may have other rights that vary from state to state. Limited warranty from date of delivery. For complete warranty details, refer to your Use & Care manual, or ask your dealer.
Specifications are for planning purposes only. Refer to installation instructions and consult your countertop supplier prior to making counter opening. Consult with a heating and ventilation engineer for your specific ventilation requirements. For the most detailed information, refer to installation instructions accompanying product or write to Thermador indicating the model number. Specifications are correct at time of printing. Thermador reserves the right to change product specifications or design without notice. Some models are certified for use in Canada. Thermador is not responsible for products that are transported from the U.S. for use in Canada