AIYATO B0BPSNGJ9W 4 Pack Key Finder Smart Bluetooth Tracker Item Finder Work User Guide

AIYATO B0BPSNGJ9W 4 Pack Key Finder Smart Bluetooth Tracker Item Finder

Work

Getting Started

1. Power On/ Off:
   • Press the Luggage Companion Function Button once to turn it on. It should beep once to indicate that it is powered on.
   • To power off, press and hold the same button until two confirmation beeps sound, then release the button, two short beeps will sound to indicate that it is powered off.
2. Check For Updates:
   • To use the Apple Find My app to locate Luggage Companion, ®the latest version of iOS , iPadOS , or macOS is recommended .  The Find Items app on Apple Watch requires the latest version of watchOS .

Add Your “Luggage Companion”

1. Start the App
   • Open the Find My app on your supported iPhone or iPad .
   • Allow notifications from the app.
2. Connect your Luggage Companion
   • Power on your Luggage Companion.
   • Tap “+” then “Add Other Item”.
   • Once your Luggage Companion is located, tap “Connect”.
   • Choose a recognizable name and emoji for your Item Locator and tap “Continue”
   • Find My will ask for confirmation to add your Luggage Companion to your Apple ID – tap “Continue”.
   • Tap “Finish” and your Luggage Companion will be set up and ready to be connected to whatever item you wish to locate, e.g., your keys.

Locate Your Item

1. Find Luggage Companion when it is Nearby
   • Open the Find My app and select the “Items” tab or open the Find Items app on your Apple Watch.
   • Tap on your Luggage Companion from the list.
   • Tap “Play Sound” to make your Luggage Companion beep.
   • Tap “Stop Sound” to stop the beeps once you find your item.
2. Find Luggage Companion Last Known Location
   • Open the Find My app and select the “Items” tab or open the Find Items app on your Apple Watch.
   • Tap on your Luggage Companion from the list.
   • Our Luggage Companion last known location will appear on the map.
   • To navigate to that last known location, tap “Directions” to open the Maps app.

Find Item When Out of Range

1. Enabling “Notify When Left Behind”
   • Open the Find My app and select the “Items” tab or open the Find Items app on your Apple Watch.
   • Tap on your Luggage Companion from the list.
   • Under “Notifications”, enable the “Notify When Left Behind” toggle.
   • You will receive a notification when you leave your Luggage Companion behind and it’s no longer in range of your device.
2. Enabling “Notify When Found”
   • Under ”Notifications”, enable the “Notify When Found” toggle.
   • When your Luggage Companion is seen by another Find My enabled device, you will receive a notifcation of its updated location.
   • Note: “Notify When Found” can only be activated when your Luggage Companion is out of range.

How to deal with device loss

1. Enabling “Lost Mode”
   • Open the F ind My app and select the “Items” tab or open the Find Items app on your Apple Watch.
   • Lap on your Luggage Companion from the list.
   • Under “Lost Mode”, tap “Enable”.
   • A screen detailing Lost Mode will pop up, tap “Continue”.
   • Enter your phone number or email address and tap “Next”.
   • You may enter a message that will be shared with the person that finds your item.
   • Tap “Activate” to enable “Lost Mode”.
   • Note: When “Lost Mode” is enabled, “Notify When Found” is automatically enabled.
   • Note: When “Lost Mode” is enabled, your Luggage Companion is locked and cannot be paired to a new device.

Resetting Your Luggage Companion

1. Remove the Luggage Companion from Find My ap p
   • Open the Find My app and select the “Items” tab.
   • Tap on your Luggage Companion from the list.
   • Please ensure “Lost Mode” is disabled.
   • Scroll to the bottom of the screen and tap “Remove Item”.
   • A summary will open, tap “Remove” to confirm.
2. Factory Reset Your Luggage Companion:
   • After successfully removing the Luggage Companion from Find My app, press and hold the Luggage Companion Function Button four times rapidly and then hold it a fifth time until you hear a ringring chime. It indicates that it is factory reset.
   • The Luggage Companion is now reset and ready to be paired to a new Apple ID.

Luggage Companion Product Specification

But Wait… There’s More

1. Replace the Battery:
   • Use your fingernails at the small gap on the side of your Luggage Companion to carefully open the case.
   • Replace the battery with a new CR2032 battery placing it positive side up (text facing up)
   • Carefully align the top hole on both sides to close.
2. Unwanted Tracking Detection:
   • If any Find My network accessory separated from its owner is seen moving with you over time, you’ll be notified in one of two ways:
   1. If you have an iPhone, iPad, Find My will send a notification to your Apple device. This feature is available on iOS or iPadOS 14.5 or later.
   2. If you don’t have an iOS device, a Find My network accessory that isn’t with its owner for a period of time will emit a sound when it’s moved. These features were created specifically to discourage people from trying to track you without your knowledge.

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes not expressly approved by the party responsible for compliance could void the user’s authority to operate this device. The device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure condition without restriction. Federal Communication Commission (FCC) Radiation Exposure Statement Power is so lowthat no RF exposure calculation is needed.This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.

The Apple Find My network provides an easy,secure way to locate compatible personal items on a map using the Find My app on your iPhone, iPad, or Mac . ® Use of the Works with Apple badge means that a product has been designed to work specifically with the technology identified in the badge and has been certified by the product manufacturer to meet Apple Find My network product specifications and requirements. Apple is not responsible for the operation of this device or use of this product or its compliance with safety and regulatory standards. Apple, Apple Find My, Apple Watch, Find My, iPhone, iPad, iPadOS, Mac, macOS and watchOS are trademarks of Apple Inc. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.

Regulatory safety information：
Put the battery out of the reach of children. Due to chemical burn and potential esophageal perforation, swallowing may cause serious injury or death in just 2 hours.The causes are chemical burn and potential perforation of the esophagus. If you suspect your child has swallowed or inserted a button cell, please call the 24-hour Poison Information Center immediately for quick expert advice.

Battery warning
This device uses a CR2032 button battery. Rated voltage 3V, rated current 210-240 mAh If the following guidelines are not followed, the lifespan of the lithium-ion battery in the device may be shortened or damaged. Do not recharge, disassemble, heat (-20 ℃+70 ℃), or burn it. The risk of equipment, fire, chemical burns, electrolyte leakage, and/or injury. Do not disassemble, hole or damage the device or battery. Do not expose the battery to flames, explosions, or other hazards. Do not use sharp objects to remove the battery.

EU Disposal Information:
The above symbol indicates that according to local laws and regulations, your product and/or its battery should be disposed of separately from household waste.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>