PEAKNX PNX31-10011 Yeelight Bridge User Guide
- June 13, 2024
- PEAKnx
Table of Contents
PEAKNX PNX31-10011 Yeelight Bridge
The product names mentioned in this document may be brands or registered trademarks of their respective owners. These are not explicitly labeled with “™” or “®”.
Product: YOUVI Yeelight Bridge
Item number: PNX31-10011
Which devices are connected?
With this bridge, various Yeelights are integrated into the YOUVI visualisation. The smart lights are displayed and operated in YOUVI in the common widgets:
- Lights
- Dimmers
- RGB(W)-lights
Note : No separate registration is necessary for using the Yeelights. As
soon as a Yeelight is found in the network, it is displayed during device
import (“Detect devices” button).
Tip : Once created in YOUVI, Yeelight devices are not only available in
the visualisation, but also in the Logic module and in the YOUVI Mobile App.
Setting up Yeelights
Use the supplied documentation to set up the desired Yeelights.
Note : Make sure to use the exact location and Bluetooth in the Yeelight
app so that the app can log into the network and connect to the Yeelights.
- Turn on LAN control for the lights so they can be found by YOUVI.
- First set up devices in the app and then return to YOUVI.
Installation
- Open YOUVI Configuration on the Dashboard page. To do this, right-click on the house in the taskbar and select “Open YOUVI Dashboard”:
- If the house does not appear in the taskbar, use YOUVI’s desktop link (Green House) labelled “PEAKnx System Configuration”.
- Select the house labelled Yeelight for installation. Confirm the message.
- Under More > Licence you can view the remaining days of your trial licence.
- For unlimited use, please purchase the add-on in the PEAKnx Shop.
- Return to the Dashboard page. Select the Yeelight house to open it:
Device import
- Select the “Discover devices” button.
- A window will appear listing all devices found in the network.
- Use the checkmarks to select which devices are to be imported into the visualisation.
- With a click on the element, further properties can be set:
- If desired, change the name of the widget, the icon and the room in which the widget should appear in the visualisation.
- Below the device properties you will see the element “Group addresses”. If you want to send Yeelight device values over the KNX bus, e.g. to integrate them into a KNX push button, insert the desired group addresses here.
- Select the “Create devices” button.
- In the “Devices” drop-down menu, the devices can be viewed again, edited or deleted:
- Now switch to the visualisation via the Dashboard page.
- Switch on the Edit mode.
- Switch to the room overview. You will find the imported devices in the previously selected rooms.
- If desired, add the devices to the dashboard and expand or collapse the tiles.
Help and support
Further information can be found in the YOUVI-Program-Help. If you have any
problems, please contact our support:
- Mail:support@peaknx.com
- Phone: +49-6151-279 1825
- www.peaknx.com
Documents / Resources
|
PEAKNX PNX31-10011 Yeelight
Bridge
[pdf] User Guide
PNX31-10011 Yeelight Bridge, PNX31-10011, Yeelight Bridge, Bridge
---|---