COVID Vaccine Rapid Antigen Test Instructions
- June 6, 2024
- COVID Vaccine
Table of Contents
COVID Vaccine Rapid Antigen Test
How to use a rapid antigen test
You can do this test yourself at home. This test will tell you if you have
Covid-19.
Your test kit will have:
- A swab
- A tube with some liquid inside A lid for the tube .
- A test
- Take the seal off the tube.
- Put the tube in the tube holder. Don’t spill the liquid.
- Blow your nose.
- Take the swab out of the packet.
- The swab goes about 2cm up your nose. 2cm looks like this.
- Put the soft end of the swab inside one nostril.
- Spin the swab four times. Take the swab out of your nose.
- Put the same swab in your other nostril.
- Spin the swab four times again.
- Put the end of the swab into the tube.
- Squeeze the tube and spin the swab around 10 times. Keep squeezing the tube, and take out the swab.
- Put the cap on the tube.
- Open the test.
- Squeeze the tube to put three drops of liquid into the short window.
- Wait 10 minutes.
What does your result mean?
- After 10 minutes, there should be a line next to the C. If there is no line next to the C then the test has not worked. You might need to do another test.
- If there is one line next to the C, this means you probably don’t have Covid-19. This is called a negative result.
- If there are two lines, you probably do have Covid-19. This is called a positive result. Stay at home and call your doctor.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>