YEEYANKA Evchargo App User Guide

YEEYANKA Evchargo App

Introduction

The Evchargo App is designed to help users find, reserve, and manage charge points for their electric vehicles (EVs). This user manual provides detailed instructions on how to effectively navigate through the app’s features and make the most of your charging experience.

Purpose of the Manual

The purpose of this manual is to guide users on using the Evchargo App. It aims to provide step-by-step instructions on various tasks such as finding charge points, reserving them, and managing the charging process.

System Requirements

To use the Evchargo App, you need a device that meets the following system requirements:

• Operating System: iOS 10 or later, Android 7.0 or later
• Internet Connection: Wi-Fi or mobile data
• Screen Resolution: Minimum 720p
• Storage Space: At least 100MB available

Installation

To install the Evchargo App, follow these steps:

1. Open the App Store (iOS) or Google Play Store (Android).
2. Search for “Evchargo” in the store’s search bar.
3. Select the app from the search results.
4. Tap on the “Install” button.
5. Wait for the app to download and install on your device.

Getting started

To get started with the Evchargo App, follow these steps:

Account Creation

To create an account:

1. Open the Evchargo App.
2. Tap on the “Sign Up” button.
3. Enter your email address and create a password.
4. Provide any additional required information.
5. Tap on the “Create Account” button.

Login

To login to your account:

1. Open the Evchargo App.
2. Tap on the “Login” button.
3. Enter your email address and password.
4. Tap on the “Login” button.

Select Scenario

Choose the scenario that matches your situation:

For the scenario you have your own charge point

If you have your own charge point, follow these steps:

Charging Process

To start the charging process:

1. Connect your EV to the charge point using the appropriate cable.
2. Open the Evchargo App.
3. Select your charge point from the list of available charge points.
4. Tap on the “Start Charging” button.
5. Monitor the charging progress on the app.

Authorize your charge point to be used by others

If you want to allow others to use your charge point, follow these steps:

1. Open the Evchargo App.
2. Select your charge point from the list of available charge points.
3. Tap on the “Authorize Charge Point” button.
4. Follow the on-screen instructions to authorize your charge point for public use.

For the scenario you are the car owner

If you are the car owner and need to find a charge point, follow these steps:

Finding charge point

To find a charge point:

1. Open the Evchargo App.
2. Tap on the “Find Charge Point” button.
3. Enter your location or use your device’s GPS to find nearby charge points.
4. View the available charge points on the map or in a list.
5. Select a charge point and view its details.

Charging process

To start the charging process at a selected charge point:

1. Connect your EV to the charge point using the appropriate cable.
2. Open the Evchargo App.
3. Select the desired charge point from the list of available charge points.
4. Tap on the “Start Charging” button.
5. Monitor the charging progress on the app.

Payment options

The Evchargo App offers multiple payment options for charging sessions. You can choose to pay using a credit card, digital wallet, or any other supported payment method.

Frequently Asked Questions (FAQs)

If you have any questions or need further assistance, refer to the FAQs section in the app. It provides answers to common queries and troubleshooting tips.

Support and contact information

If you require technical support or have any other inquiries, you can reach out to our support team using the contact information provided in the app.

Revision history

The revision history section in the app provides details about the changes made in each version of the Evchargo App.

Introduction

Evchargo is an application enabling you:

• Integrate your car and see the state of charge point when charging.
• Connect your home charge point and share it with friends and family.
• Reduce costs and environmental impact with our intelligent charging functionality.
• Find the public charge points.U

Purpose of the Manual

This user manual provides detailed instructions on how to use the Evchargo App to fi nd, reserve, and manage charge points for your electric vehicle (EV). It aims to help users navigate through the app’s features eff ectively and make the most of their charging experience.

System Requirements

To use the Evchargo App, ensure that you have a compatible smartphone or tablet running the latest version of iOS or Android.

Installation

Download and install the Evchargo App from the offi cial app store for your device (e.g., Apple App Store or Google Play Store). Or you also can use your mobile browser to scan the QR code below and download the App.

Getting started

Account Creation
To use Evchargo, you need to create an account. Launch the app and follow the on-screen instructions to register by providing your email address, creating a password, and agreeing to the terms of service.

Login
Once you have an account, use your registered email and password to log into the app.

If you have a Chargein App account, you can also use this account to log in to Evchargo, but you will be prompted to bind your email address, and the data in your Chargein App will be synchronized to Evchargo.

Select Scenario

Based on your role, Evchargo off ers two scenarios for you to use the charging service: if you have your own home charge point, click on the Charge Point icon, and if you want to fi nd a public charge point to charge your car, click on the Map icon, as shown in Figure 2- Select Scenario.

For the scenario you have your own charge point

For the scenario you have your own home charge point, before you initiate a charging session using Evchargo, you are required to make some confi gurations fi rst, please follow the following steps to complete the confi guration:

• Step 1: Enable permissions
  You will be preseted with a page where you can allow Bluetooth, Wi-Fi, and location permissions, as shown on Figure 3 – Permission.

• Step 2: Select the brand of charger point
  Select your charge point’s brand, as shown in Figure 4 – Select brand.

• Step 3: Bind the charge point
  There are three ways to bind the charge point, as shown in Figure 5 – Add a charge point.

  • Scan the QR code: Scan the QR code on the charge point.
  • Add a charge point manually: Enter the ID of the charge point.
  • Check for nearby charger point: Check the available charge points nearby, and choose the ID of the charge point you want to bind to.

• Step 4: Select operator
  Select the Operator from the list; the operator is the one from whom you purchased your charging point.

• Step 5: Select the communication mode
  To establish a communication for your charge point, there are three communication modes for you to select: Online mode: In this mode, you need to select a network method, as shown below:

• Bluetooth mode: To connect your charge point to your mobile device via Bluetooth.
• Plug &Charge mode: Select this mode, and you can get your car charged by simply plugging the connector into your car.

Charging Process
There are three ways for you to charge your car:

• Charging via Network
• Charging Via a RFID card
• Plug & Charge.

Charging via network
When you select Charging via network, please refer to the above Online Mode, and make sure you have completed the network confi guration.
You can directly start the charging session, or you also can customize the charging by setting the maximum current and the charging schedule when you reach the page as shown in Figure 7 – Charging via network.

The purpose for setting the maximum charging current is to ensure the household electricity consumption, for example, if the current threshold for tripping in your home is 50A and the household appliances have consumed 30A, you must ensure that the output current for the charge point falls within 20A to avoid tripping.

Sometimes the status of the charge point and its network states may not be up to date, you need to refresh the status by slightly pulling down the page.

The Charging Mode and the networking method in Network Configuration may vary depending on the functional confi guration of your charge point.

Note:
The Charging Mode incudes General mode, ECO mode, Mix Mode and Load balance mode.

ECO mode: It’s a way to charge your car with solar energy, allowing you to travel truly economically and carbon-free. When the photovoltaic current is suffi cient, you can use this mode to charge your car.
Mix mode: it’s way to charge your car by combining photovoltaic current and grid. If the photovoltaic current is lower than the set value then the car will be charged by the grid.
Load balance mode: it’s a way to ensure the household electricity consumption fi rst and avoid tripping.
This mode requires to equipped with a smart or CT or both of them to monitoring the current.

The mix mode and load balance mode require to equipped with a smart or CT or both of them to monitoring the current.

Clicking on the button, and the charging session will begin after the charge point responds successfully. As shown below, you can view the charging information, including charging speed, charging time, voltage, current and power on the App, and you also can click on the button to terminate the charging session.

Charging via a RFID card
Before you charge your car, you need to add a RFID card fi rst.
Click Me > Card Management > Add a card to add a RFID card for your charge point.
After plugging the connector into the car, you can use the card to start and end the charging session by touching the sensor area of the charge point.

Plug & Charge
You need to switch the communication mode to plug & charge by pulling down the charging page hard, then just plug the connector into the car and the charging session begins.

Authorize your charge point to be used by others
By way of authorization, Evchargo provides two ways for you and your family and friends to share charge points: Authorize by binding email and authorize by RFID card.

Authorize by binding email
Before using this function, please make sure that the authorized users have downloaded and registered Evchargo. Pull down hard the on the charging page to enter the setting page, select charge point authorization to add authorized users.

Authorize by RFID card
Before using this function, please make sure that the authorized users have downloaded and registered Evchargo, and have added the RFID card, you need get the data of the authorized user synchronized to your charge point, and he/she can share the charge point with you.

For the scenario you are the car owner
Finding charge point

Map view
Tap on the “Map” icon to access the map view. The map displays charge points in your vicinity. You can zoom in/out and pan the map to explore diff erent areas. Charging points are indicated by icons, and their details can be viewed by tapping on them.

List view
To view charge points in a list format, tap on the icon. This provides a sortable list of charge points based on distance, availability, or other fi lters. Tap icon to return to the Map view.

Filter and search
Use the fi lter option to narrow down charge point results based on criteria such as connector type, brands and charge point type, etc. The search function allows you to fi nd specifi c charge points or locations.

Charging process
After you get to the charge point, and start the charging session, you will see the page as shown below:

Payment options

So far, Evchargo has two payment methods: pay the bill directly with a bank card after the charging session ends, or pay the bill by authorizing a specifi c amount to the bank, and the charged amount will be immediately debited after the charging session concludes.

The payment methods may vary depending on the Operator.

Before paying the bill, you need to add a bank card, the payment will be made via the third-party platform Stripe. Click on the Pay button and you will be prompted with the page to add your bank card information, as shown below:

If the amount is authorized to the bank and then have your money automatically deducted, you need to authorized a specifi ed amount to the bank to deducted automatically

Frequently Asked Questions (FAQs)

For the Frequently Asked Questions (FAQs), please click on Me > Help & Feedback for details.

Support and contact information

Should you have any question, please feel free to contact us:

info@zingygmbh.com
0049(0) 5362 5009 787

Revision history

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>