Todos Industrial AP1066 Tablet PC User Manual
- June 6, 2024
- Todos Industrial
Table of Contents
User Manual
Introduction
This operation guide is for the user to understand and familiarize with our
products as soon as possible. Here we briefly introduce the key layout and
definition of our products in a graphical way and give some basic instructions
for some basic operations.
The key layout and definition
- MIC
- TF Card Block
- USB charging interface / USB seat / OTG seat: USB line interface; OTG line interface, transfer mobile hard disk, keyboard, mouse.
- Earphone seat
- Front camera
- Power button: Press and hold 3S to switch on/off, short press again to wake up the screen.
- Volume button
- Rear camera
- Speaker.
- Reset
Desktop introduction
- **Main Interface Introduction:
Get things done on the go with help from Google Assistant
Touch to open calculator
Touch to enter Calendar
Touch to open the camera
Fast, easy, and secure browsing with Google Chrome
Touch to open clock
Touch to enter contacts
Touch to open Google Duo for a video chat
Free up space on your phone, find files fast, and easily share them easily
with
others Gallery Go. Gallery Go is a light, fast, and easy to use offline
gallery
Gmail Go. A light and smart email app for Android (Go edition)
Google Go Google Go is a lighter, faster way to search, with search results
optimized Google Maps Go, Directions, live traffic, and city transit
Google Play is your entertainment unbound
Touch to enter system settings
Touch to open sound recording
Touch to play videos
Touch to enter wallpapers
YouTube, see what the world is watching
The music streaming app.Made by YouTube
**
- Navigation Bar
**Basic operations
**
-
Boot / shutdown
In the off state, long-press the power button (3 seconds) to boot, the machine after the boot LOGO, enters the main interface. It is also possible to insert the charger when it is turned on (please use the dedicated 5V/2A charger provided by the company).
In the boot state, press and hold the power button for 3 seconds, and the shutdown option will pop up. Touch Shutdown to shutdown.
In the case of a crash or inconvenient touch, long-press the power button for 10 seconds to force the shutdown. -
Power / USB charging detection
Battery usage indication
When the battery is in use, as the battery power decreases, the white bar on the desktop’s navigation bar battery icon will gradually decrease to the icon .
Charge status indication Connect the USB cable with the USB charger and then connect it to the USB port of the machine to charge it. The battery icon
in the navigation bar of the desktop indicates that the battery is being charged. Do not insert or remove the charger during charging. When the battery icon fills up (go to the navigation bar application shortcut setting interface, the battery level is displayed as “see icon”
Attention:
2.1 After the machine is powered off, do not perform the firmware upgrade
operation. Charge the battery beforehand.
2.2 When the machine is powered off and plugged in, there will be a charging
icon.
2.3 When the USB is plugged into the computer, the machine will automatically
charge.
When the power of the machine is low, don’t do any operations.
Suggestions:
When the user uses and upgrades for the first time, the machine is charged to
100% of the power to make sure the battery level is relatively accurate.
*All parameters are subject to physical condition.
Google, Android, Google Play, and other marks are trademarks of Google LLC.
FCC Statement
-
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. -
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: Reorient or relocate
the receiving antenna.
Increase the separation between the equipment and receiver. Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
SAR Information Statement
Your wireless phone is a radio transmitter and receiver. It is designed and
manufactured not to exceed the emission limits for exposure to radiofrequency
(RF) energy set by the Federal Communications Commission of the U.S.
Government. These limits are part of comprehensive guidelines and establish
permitted levels of RF energy for the general population. The guidelines are
based on standards that were developed by independent scientific organizations
through periodic and thorough evaluations of scientific studies. The standards
include a substantial safety margin designed to assure the safety of all
persons, regardless of age and health. The exposure standard for wireless
mobile phones employs a unit of measurement known as the Specific Absorption
Rate or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are
conducted with the phone
transmitting at its highest certified power level in all tested frequency
bands. Although the SAR is determined at the highest certified power level,
the actual SAR level of the phone while operating can be well below the
maximum value. This is because the phone is designed to operate at multiple
power levels so as to use only the power required to reach the network. In
general, the closer you are to a wireless base station antenna, the lower the
power output. Before a phone model is available for sale to the public, it
must be tested and certified to the FCC that it does not exceed the limit
established by the government adopted a requirement for safe exposure. The
tests are performed in positions and locations (e.g., at the ear and worn on
the body) as required by the FCC for each model. The highest SAR value for
this model phone when tested for use on the body, as described in this user
guide, is 1.183W/Kg (Body-worn measurements differ among phone models,
depending upon available accessories and FCC requirements). While there may be
differences between the SAR levels of various phones and at various positions,
all meet the government requirement for safe exposure. The FCC has granted an
Equipment Authorization for this model phone with all reported SAR levels
evaluated as in compliance with the FCC exposure guidelines. SAR information
on this model
phone is on file with the FCC and can be found under the Display Grant section
of http://www.fcc.gov/ out/flaccid after searching on FCC ID: 2AZQ6-AP1066
Additional information on Specific Absorption Rates (SAR) can be found on the
Cellular Telecommunications Industry Association (CTIA) web-site at
http://www.wow-com.com. In the United States and Canada, the SAR limit for
mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram
of tissue. The standard incorporates a substantial margin of safety to give
additional protection for the public and to account for any variations in
measurements.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 10mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>