MELLIAN DAFRE6R-Bzw MagiBlow Air Styler Instruction Manual
- June 13, 2024
- MELLIAN
Table of Contents
MELLIAN DAFRE6R-Bzw MagiBlow Air Styler
Product Information
The MagiBlow Air Styler is a rotating hot air brush designed to blow dry and
style your hair effortlessly. With a powerful 1200W motor, it is capable of
drying and styling your hair at the same time. The styler comes with 2
interchangeable accessories for easy
styling. The rotating function allows you to automatically wind the section of
hair around the brush for a smooth blow-drying experience.
Model Number: HM-400
Ratings: 220-240V 50/60Hz 1200W
Product Usage Instructions
Direction of Rotation:
- To start rotation, press the rotation button in the desired direction of rotation (right or left).
- Keep pressing the switch while blow drying.
- To stop rotation, release the rotation button.
- Please note that the cold function does not support rotation.
Warning:
- Do not use this appliance near water or with wet hands.
- Avoid using the appliance near bathtubs, showers, basins, or other vessels containing water.
Maintenance:
- Always ensure that the hair dryer is disconnected from the mains supply before cleaning.
- Use a damp cloth for cleaning and wipe dry. Do not use abrasive cleansers.
How to Use Your Hot Air Styler:
- Always ensure the switch is set to the OFF (0) position before plugging the unit into the power outlet.
- Use the high setting for drying hair and the low setting for styling.
- If the hair dryer stops for any reason, turn it off immediately and let it cool down.
Switch Setting:
- 0 = OFF position
- Cold air position (rotating not possible)
- 1 = Low Temperature position
- 2 = High Temperature position
Cleaning and Care:
- Keep the accessories such as concentrator away from the hair dryer when not in use.
- Regularly remove hairs and dust that adhere to the air intake net.
- Store the hair dryer in a dry place.
Note: The brush accessory may become hot during use. Be cautious when removing it.
Product Identification
- A: Button for accessory
- B: Rotation button
- C: Power button
- D: Swivel power cord
- E: 50MM AL tube brush
- F: 38MM brush
How to use your hot air styler?
- Always ensure the switch is set to OFF(0) position before plugging the unit into the power outlet
- Use the high setting for drying hair, and use low setting for styling.
- lf the hair dryer stop for any reason , turn it off at once and let it cool down
Switch setting
0 = OFF position
= Cold air position (rotating not possible)
1 = Low Temperature position
2 = High Temperature position
Cleaning and care
- Keep the accessories such as concentrator from the hair dryer when don’t use the product.
- Keep the air intake net clean, frequently remove hairs, dust will adhere to the net.
- Keep the hair dryer staying at dry place.
Dear customer
Please read this user manual carefully before using your air styler, paying
particular attention to the safety notes on this and the following page! Keep
the user manual safe for future reference and also to pass on to any
subsequent owner.
Air Styler function
It has 2 changeable accessories to style your hair easily; it is powerful
enough to dry your hair, at the same time it styles.
Changing accessories:
- Fitting: Push the button and place the aacessory you wish into the unit until you hear a click.
- Removing the brush: Push the button and remove the accessory you require from its recess.
- Reminder: the brush accessory is very hot when in use. Be careful when removing it.
Tube brushes 38mm & 50mm
Negative ions can let hair straight, repair hair squama looks elegant. The
brush let you dry and style your hair at the same time. giving a perfect
result both at the front and at the back of your hairstyle. lt has a
rotational function, especially designed so that you can blowdry your hair
effortlessly and in a single move quicker and easier than traditional blow
drying.
Safety cautions
-
Do not block the air intake or outlet areas during use. Blocking the air flow can result in overheating, which may cause burns or mechanical damage.
Rolling too large a bunch of hair around the brush will not allow proper curling and also block the air outlet. -
lf the air intake is blocked by the hand during use, for example, the thermal switch may function and turn off the device. This does not mean the device has been damaged and it should shortly return to normal. However, repetition of this sequence can result in damage.
-
When the styler is switched on, do not leave it near bedding, paper or other combustible objects. Also, do not use the styler near gas or other highly combustible items.
-
Avoid dropping or subjecting the device to excessive shock. Do not pull the cord with unnecessary force.
-
After use, switch the styler off then unplug the cord from the receptacle.
-
Wipe the housing clean with neutral detergent. Do not use thinner or benzine. Do not directly apply hair oilrs or lotions to the brush or comb.
Indirect contract from the hair is permissible. -
Do not store near such cosmetics as they may deform the housing, comb and brush.
-
Do not use in a bath area or with wet hands. Do not store in a damp area.
-
If damage occurs during use, the motor does not function properly, the warm air flow stops, or other abnormality occurs, cut off the power supply immediately and have the device repaired by an authorized repairman. Do not tamper with the inner mechanism.
-
For additional protection, the installation of a residual current device (RCD) with a rated residual operating current not exceeding 30mA is advisable in the electric circuit supplying the bathroom. Ask your installer for advice.
-
When the hairdryer is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the hairdryer is switched off; Do not uset his appliance near bathtubs, basins or other vessels containing water.
-
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
-
Children should be supervised to ensure that they do not play with the appliance.
-
Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air openings may be blocked . Keep the air openings free of lint, hair, andthe like.
-
While using the appliance, keep your hair away from the air inlets.
Direction of rotation
This function enables you to automatically wind the section of hair around the brush to blow dry your hair effortlessly.
- To start rotation, press the rotation button in the desired direction of rotation (right or left)
- Keep pressing the switch while blow drying
- To stop rotation release the rotation button
- Please notice, cold function does not support rotation
- This function enables you to automatically wind the section of hair around the brush to blow dry your hair effortlessly.
Warning
-
Do not use this appliance near water, do not use the appliance with wet hands.
-
Do not use this appliance near bathtubs, showers, basins or other vessels containing water.
-
When the hairdryer is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the hairdryer is switched off.
-
For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not exceeding 30mA is advisable in the electrical circuit supplying the bathroom. Ask your installer for advice.
-
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety. -
Children should be supervised to ensure that they do not play with the appliance.
Maintain
IMPORTANT: Always ensure that hair dryer is disconnected from the mains supplu before cleaning. Use a damp cloth for cleaning and wipe dry. This will help preserve the original finish of your hair dryer. Abrasive cleansers should not be used.
WARNING: Never immense the hair dryer in water and always ensure that plug is kept dry. After a while of use, you shou.d take the inlet apart and clean it. Operate method: push the air inlet grille, then move to the left until it our of hair dryer. After finishing clean, please inset the air inlet grille into the tail of hair dryer and move to the right until locked at the right position. Frequently clean out any hair or full that becomes stuck in the inlet filter. Not to clean may result in overheating.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>