MELLIAN SH22 Steamy Pro Hair Straightener User Manual
- June 12, 2024
- MELLIAN
Table of Contents
MELLIAN SH22 Steamy Pro Hair Straightener
Product Information
- Product Name: Steamy Pro Hair Straightener
- Description: The Steamy Pro Hair Straightener is a professional-grade styling tool that uses steam technology to straighten hair quickly and effectively. It features a tank-lock switch, liquid infusion tank, plate locking switch, and heating plates made of ceramic for even heat distribution. With temperature settings and a sleek design, this hair straightener allows you to unleash your potential and achieve beautiful, straight hair.
Product Usage Instructions
- Insert the plug into a suitable socket (10/240V) and switch it to the ON position.
- The red power indicator light will illuminate, indicating that the straightener is heating up.
- Set the desired temperature using the temperature settings.
- Allow the straightener to heat up for about 30-60 seconds.
- Brush your hair and divide it into sections approximately 5 cm wide.
- Place each section of hair between the plates, as close to the scalp as possible without touching it. Avoid touching the scalp.
- Holding the plates tightly closed with the section of hair in between, slide the iron down and away from the section of hair.
- Do not hold the hair between the clamping plates for more than 2-5 seconds, depending on the thickness of your hair.
- After straightening a section, move on to another section.
- When you’re done, flip the device’s switch to the off position, unplug it, and allow it to cool down completely before storing.
OVERVIEW
INSTRUCTIONS
- Insert the plug into a suitable socket (10/240) and switch to the ON position.
- The red power indicator light will illuminate to indicate that the straightener is heating up.
- Set to the desired temperature.
- Let it heat up for about 30-60 seconds.
- It brushes hair and divides it into sections about 5 cm wide, placing the section between the plates as close as possible to the scalp without touching it. Do not touch the scalp.
- Holding the plates tightly closed with the section of hair in between, slide the iron down and away from the section of hair.
Do not hold the hair between the clamping plates for more than 2-5 seconds (depending on hair thickness). After a section is straightened, move to another section. When you’re done, flipthe device’s switch to the off stand, unplug it, and let the device cool down completely before storing.
GENERAL SAFETY INSTRUCTIONS
- It is important to read all safety instructions before using your professional steam styler.
- Remember that this is an electrical device and the clamping plates are designed to reach very high temperatures.
- Keep this device out of the reach of children.
- WARNING! To protect against electric shock, never touch the appliance, cord or plug come into contact with water or any other liquid. Do not use in bath or shower.
- Do not place nearby sinks or baths or anywhere the device may fall into liquid. Never reach for an electrical device that has fallen into water. Turn off the power at the main breaker and then unplug the power cord. Do not attempt to reuse iron if it has been
- submerged in water.
- Do not handle with wet hands. Make sure hands are dry before operating or adjusting any switch on the appliance or touching the plug.
- To prevent possible damage to property, never leave the appliance unattended while plugged in.
- Remove the plug from the socket after use. When the straightener is switched oft, the electric current still reaches the device. closely supervise when the straightener is used by, on or near children.
- Keep the cord away from heated surfaces. Do not wrap the cord around the straightener.
- When heated, do not touch with bare skin.
- Always inspect the device before use. Pay particular attention to the condition of the cord and plug.
- Do not operate the appliance with a damaged cord or plug.Do not use if device has been dropped, left outdoors, submerged in water or if not work according to instructions
- WARNING! If a malfunction occurs, do not attempt to repair it. This device has no user-serviceable parts
INSTRUCTIONS FOR FILLING THE TANK WITH ARGAN OR WATER INFUSION
- This hair straightener can be used in combination with the supplied liquid tank, but can also be used without a regular one.
- Before plugging in, fill the reservoir by snapping it out of the straightener.
- To remove the tank, slide the tank lock switch in the direction of the “UNLOCK” symbol, this will release the tank from the iron.
- Turn the tank over and remove the rubber cap at the bottom of the tank to open and refill.
- Insert the tip cap into the tank opening and slowly squeeze the liquid into the tank.
- After filling, close the rubber cap on the bottom of the reservoir and place the reservoir back in the straightener. (the end closest to the styling plates). Snap the tank into place at the LOCK-
- SWITCH end to complete the installation.
- To control the amount of vapor, use the vapor control switch, which is located at the bottom of the iron.
CLEANING
- Before cleaning your straightener, always unplug it and let it cool down completely. It is recommended to wipe the hair straightener with a damp cloth.
- Do not use harsh cleaners, abrasives, solvents, or chemical cleaners if you begin to experience product buildup. NEVER immerse the device in water to clean it
- For straighteners with product buildup, use only straightener cleaners. These non-toxic cleaners quickly and safely remove most styling products.
WARRANTY
- Warranty starts trom the date of purchase. This warrant only covers manufacturing detects and not damage resulting from misuse or improper maintenance of the device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>