FIFINE K669 XLR Dynamic Microphone User’s Guide
- June 13, 2024
- fifine
Table of Contents
FIFINE K669 XLR Dynamic Microphone
WHAT’S IN THE BOX?
- 1 X USB Microphone with 5.9ft USB Cable
- 1 X Metal Tripod Stand
- 1 X User Manual
CONTACT US
-
Get Social:
Facebook page:http://bit.ly/FifinePage -
Contact Info:
Tech support: [email protected]
Operation video:http://bit.ly/k669669bproblemsolving
WARRANTY
Fifine microphone warrants its hardware product defects in materials and workmanship for a period of one year from the date of original retail purchase, provided the purchase was made from an authorized Fifine microphone dealer. This warranty is void if the equipment is altered, misused, mishandled, suffers excessive wear or is serviced by any parties not authorized by Fifine Microphone. For warranty service ,contact your local distributor or [email protected]
INTRODUCTION
-
Keep the volume all the way down when plugging the mic into usb port, and gradually turn volume up for the perfect effect during the use.
- Volume Control
-
Volume up:
Clockwise(Turn right) -
Volume down:
Counterclockwise(Turn left) -
Mute:
Counterclockwise (Turn maximum left)
-
The front of the microphone should be facing the sound source.(A VOLUME knob indicate the front of the microphone). No matter how you adjust the angle or position of the mic, make sure the front of the mic is pointing at your mouth in order to achieve the best pick up effect.
STAND INSTALLATION AND ADJUSTMENT
- If necessary, adjust the microphone’s angle with the pivot mount’s thumbscrew.(turn left for loosen ,turn right for tighten)
- Pls Swing the microphone counterclockwise, Swing the microphone clockwise will cause the bracket broken.
- Screw the pivot mount to adjust microphone angle 360° horizontally.
SPECIFICATION
- Power Supply: 5V
- Polar Pattern: Uni-directional
- Frequency Response: 20Hz-20KHz
- Sensitivity: -43dB±3dB(at 1kHz)
- Equivalent Noise Level: -80dBFS
- Max.SPL: 130dB(at 1kHz≤1% T.H.D)
- S/N Ratio: 78dB
- Electrical Current: 70mA
COMPUTER SETUP
Apple MAC OS
- Plug the free end of the provided USB cable into the USB port on your computer. Your computer will automatically recognize the USB device and install a driver.
- To select the K669 as your audio input, first, open your System Preferences.
- Next, click Sound to display the Sound preference pane.
- Click the input tab and make certain “USB PnP Audio Device” is selected as the default input device. Drag progress bar to adjust volume of input.
- If you need to output your voice from the 3.5mm headphone jack of Macbook, choose the output from “Internal Speaker” option. Drag progress bar to adjust volume of output.
NOTICE:
- If you want to monitor your voice when using Macbook, you must turn on any recording software first(Audacity for example), make sure to click “Software Playthrough(on)”, then click the record button to begin, otherwise you can not hear any sound when you speak to the mic.
- Choose the default Dictation&Speech software when you use the speech to text in Macbook,click “On” under Dictation window, so that your microphone can be recognized by the software.
WINDOWS
Please wait for a few secs when first time operation, since driver of
microphone takes time to automatically install. There may be no pop-up window
or message though. (If plugging USB in a different USB port, driver installs
again).
After installation, you can test the mic by speaking to it. If the mic picks
up no sound, please follow procedures below.
-
Right-click the speaker icon at the bottom right of the screen. Click “Sounds”.
-
Confirm the loudspeaker is open. Click the loudspeaker is being used-”Properties”– “levels”,drag progress bar to adjust volume of output
-
Select the Recording tab, and choose “USB PnP Audio Device” as the default device.When you speak to mic, bar-type icon will turn green and bounce. If it remains unchanged, please reset computer and replug in the USB port.If there’s still no “USB PnP Audio Device” ,please contact FIFINE after service.
-
If you want to directly monitor your recording,click Microphone ”USB PnP Audio Device”- “Properties”-”Listen”-click”Listen to this device”-”Apply”.No sound can be heard through earphone, if you don’t follow this procedure.
NOTE: Click off “Listen to this device” when you are using any recording software or chatting software(Skype). -
Double click on the “USB PnP Audio Device” icon to open the Microphone Properties window. Click the speaker icon under the Levels tab.Select the Levels tab(14-20db) when the speaker output maximum volume to adjust microphone level.
Note:(Applicable for MAC and Windows)
- If computer prompts that it’s unable to identify USB devices, please restart computer and replug the microphone into other USB port.
- If mic recognized but no sound comes out, please check whether System Sound is mute and whether you have turned volume control on microphone to minimum.
- if mic recognized but not sound out,and your computer runs windows 10, please go to settings>privacy>microphone and click the Allow apps to access the microphone to ON then restart.
Recording Software Settings
-
Make sure you have the correct input/output selected.
Notice: logging out of AUDACITY(or other recording software) if you find usb microphone is unavailable.And then plug in mic first ,secondly log in software again.
-
Make sure to click off listen to device in your computer system when you are using any recording software,or else your would hear duet of yourself just like too much echo.
-
There are several ways to improve the recording by using Audacity. Come to FIFINEMICROPHONE.COM,find SUPPORT, click the Tutoral Blogs or type the https://fifinemicrophone.com/blogs/news directly to search the better recording solution for your interested subject in our blogs.
-
For windows computers,we recommend audacity, and for Apple computers, you can use Apple’s own QuickTime player to test the recording.
IMPORTANT NOTICE
-
Setting your software levels
Correct adjustment of microphone level is important for optimum performance. Ideally, the microphone level should be as high as possible without overloading the input of your computer. If you hear distortion, or if your recording program shows levels that are consistently overloaded (at peak levels), turn the microphone volume (or level) down, either through your control panel (or system preferences) settings, or through your recording software. If your recording program shows insufficient level, you can increase the microphone gain either from the control panel (or system preferences) settings or through your recording program. -
Selecting software
You have many choices in recording software. Audacity, available for free online at http://audacity.sourceforge.net/, is a widely used software program that provides basic recording software.
Note: The microphone must be plugged in first and secondly turning on the recording software. -
Positioning your microphone
It is important to position the microphone directly in line (on axis) with the person speaking/ singing or instrument (or other sound source) to achieve the best frequency response of the microphone.For use in speaking/singing applications, the ideal placement for the microphone is directly in front of the person speaking/singing. -
Protecting your microphone
Avoid leaving your microphone in the open air or in areas where temperatures exceed 110° F (43° C) for extended periods. Extremely high humidity should also be avoided.
FREQUENTLY ASKED QUESTIONS
What is the Fifine K669 XLR Dynamic Microphone?
The Fifine K669 is a dynamic microphone designed for various audio recording applications, including vocals, instruments, and podcasting.
What type of microphone is the Fifine K669?
The Fifine K669 is a dynamic microphone, which means it's well-suited for capturing sound in high-volume environments.
Is the Fifine K669 suitable for live performances?
Yes, the Fifine K669 can be used for live performances, such as singing and public speaking, when connected to appropriate audio equipment.
Does the Fifine K669 require phantom power?
No, the Fifine K669 does not require phantom power because it's a dynamic microphone. It can be used with standard XLR microphone inputs.
What is the frequency response range of the Fifine K669?
The Fifine K669 has a frequency response range of 50Hz to 15kHz, making it suitable for capturing vocals and speech.
Can I use the Fifine K669 for recording instruments?
Yes, the Fifine K669 can be used to record instruments, such as acoustic guitars or percussion.
Is the Fifine K669 a good microphone for podcasting?
Yes, the Fifine K669 is a suitable choice for podcasting and voice recording, offering good audio quality for spoken content.
Does the Fifine K669 come with an XLR cable?
The Fifine K669 typically includes an XLR cable, making it ready for connection to compatible audio equipment.
Can I mount the Fifine K669 on a microphone stand?
Yes, the Fifine K669 has a standard microphone stand mount, allowing you to attach it to a stand for ease of use.
Is the Fifine K669 compatible with professional audio equipment?
Yes, the Fifine K669 has an XLR connector, making it compatible with a wide range of professional audio equipment.
Can I use the Fifine K669 with a computer for recording?
Yes, you can use the Fifine K669 with a computer for recording, but you may need an XLR-to-USB audio interface if your computer lacks an XLR input.
Is the Fifine K669 suitable for outdoor recording or performances?
The Fifine K669 can be used outdoors, but be mindful of environmental conditions and wind, which may affect its performance.
Does the Fifine K669 microphone have an on/off switch?
The Fifine K669 typically does not have an on/off switch. It relies on the audio equipment's mute or power controls.
Is the Fifine K669 microphone built durably?
The Fifine K669 is built to be durable, suitable for stage and studio use.
Is the Fifine K669 microphone suitable for beginners?
Yes, the Fifine K669 is often recommended for beginners due to its affordability and versatility, making it a solid choice for those new to audio recording.
VIDEO – PRODUCT OVERVIEW
DOWNLOAD THE PDF LINK:FIFINE K669 XLR Dynamic Microphone User’s Guide