JNY safety care LINGO Safety Pendant User Guide
- June 13, 2024
- JNY safety care
Table of Contents
JNY safety care LINGO Safety Pendant
Product Information
The LINGO Safety Pendant is a wearable device designed to provide assistance in emergency situations. It has been pre-programmed and is ready to use upon purchase. The pendant features a side button for power on/off and an SOS button for emergency calls. It also includes a charging cable for regular recharging.
Not sure what to do? READ ME!
- Your pendant has already been programmed by us.
- It is working and ready to go!
- Follow these steps so you will be ready in an emergency.
INSTRUCTION
-
Step 1.
Turn your pendant on by holding down the side button until it vibrates, and a voice prompt will announce “Your Pendant is turning on”. (See image below) -
Step 2.
Wear the device however you like, whether on the lanyard around your neck or in the accessory if you have purchased one. -
Step 3.
Set up the Lingo to charge by attaching the large end of the charging cable (a) onto the back of the
Lingo (b) and the other end of the charging cable (a) into the wall plug (c). Insert the wall plug (c) into a power point and turn it on. Recharge the pendant every night by repeating this process (b). -
Step 4.
When you need help, press, and hold the SOS button and the pendant will call your emergency contacts one at a time until someone answers.
Test your pendant every few monthsto make sure itis working.
© 2020. JNY Safety Care Pendants. All rights reserved
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>