VOSSER B0CLY45NMP Air Mattress with Built In Electric Pump User Manual

VOSSER B0CLY45NMP Air Mattress with Built In Electric Pump

Caution

• The voltage used must be AC 110-120V for US / CA, AC 220-240V for EU / UK, and AC 100V for Japanese specifications.
• When using the product, do not allow sand, gravel, or small objects entering the inflation and deflation ports. Keep the pump unblocked all the time.
• Stop using the pump for at least 5 minutes after continuous use for 10 minutes.
• Do not ever try to put hands or fingers into the inflation and deflation ports.
• Do not use the product near hot objects, such as electric stove, oven to prevent melting.
• Air inside the air mattress may vary with the ambient temperature. Reinflate the air mattress if necessary.
• Do not sleep on one side of the air mattress to avoid tilt or deformation.

WARNING

• This air mattress can melt or burn. Keep away from flames, heaters, and other hot objects.
• Do not smoke on the air mattress.

Risk of suffocation
Infants have suffocated on inflatable mattresses. Never place infants aged birth to 15 months to sleep on this inflatable air mattress.

This is not a life saving device
It is not intended for use in water. It is not a flotation device or a water toy.

• Do not stand, walk or jump on the air mattress.
• Not a toy – Do not let children play with it to avoid falls or damages to the air mattress.

To avoid damage, keep away from sharp objects.

No pets on or near the air mattress.

Read the air mattress instructions thoroughly before use.

Package Contents

(Product received is subject to the actual product)

1. VOSSER Air Mattress
2. Built-in Electric Pump
3. Carry Bag
4. Repair Patch

How to Use

Get Started

200 C above
/ 680 F above

Wait for 1 hour

Unroll the Air Mattress

Note:

1. Open the cord storage holder, plug into a power source. Turn the knob clockwise to the INFLATE position. It takes 3 to 5 minutes to inflate.
2. When the airbed is fully inflated, turn the knob counterclockwise to OFF to shut off the motor. Put the cord back into cord holder.
   

Deflating the Air Mattress

1. To deflate, make sure nothing is on top of the mattress. Take out the cord and plug into a power source. Turn the knob counterclockwise to the DEFLATE position.
2. When done, rotate the knob to OFF, and put the cable back into the cord holder.
3. Open the air valve to let the remaining air out, then roll the bed up for easy storage.
   

Cleaning and Maintenance

1. Wipe with a damp cloth, lay dry after cleaning.
2. Remove the sheet from the air mattress when not in use.
3. Use this product in a well-ventilated place and keep it away from humidity.

Storage

Caution

• Keep away from sharp and rough objects.
• Do not drag the deflated air mattress on the ground.
• Store in a well-ventilated place. Keep away from humidity and avoid direct sunlight.
• Do not rub the folding places.

Troubleshooting Guide

PVC Smell
There may be some PVC smell when you receive the air mattress, which will be gone in 1 to 2 days.

Repair the Air Leakage

1. Place your ears closely to or comb your hand across the air mattress to locate the leaking area. If failed, wipe the inflated air mattress with mild soapy water, and air bubbles will form from the leaking area. Do not submerge the air mattress in water.
   

2. Clean the leaking area from all dirt and dry it completely. Deflate the air mattress.

3. Cut a suitable size of repair patch, press it firmly over the leaking area.
   

4. Wait for 1 hour before inflation.

5. The repair patch can only stick on PVC surface.

6. If you have any further problems, please contact our after sales support team. We will respond to you within 24 hours.

Customer Service

12-month Warranty
Lifetime Support

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>