Shenzhen South China Yingcai 812-CX-US Magnetic Charging Stylus Pen User Manual
- June 13, 2024
- Shenzhen South China Yingcai
Table of Contents
Shenzhen South China Yingcai 812-CX-US Magnetic Charging Stylus Pen
Product Information
The product is a device that complies with part 15 of the FCC Rules. It is
designed to operate without causing harmful interference and is capable of
accepting any interference received, including interference that may cause
undesired operation.
The device has been evaluated and meets the general RF exposure requirement.
It can be safely used in portable exposure conditions without any
restrictions.
Please note that any changes or modifications to the device that are not
expressly approved by the party responsible for compliance may void the user’s
authority to operate the equipment.
Product Usage Instructions
- To improve reception and minimize interference, you can try the following:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- If you require further assistance or encounter any issues, please consult the dealer or seek help from an experienced radio/TV technician.
User Guidance
Before the first use, please attach the Stylus magnetically to the computer for charging.
Magnetic Charging
Attach the Stylus to the magnetic charging area on the right side of the iPad,
and it will automatically start charging.
Charging Status
The Stylus is currently charging. You can check the charging status on the
iPad status page after connecting via Bluetooth. It takes approximately 90
minutes to fully charge.
Turn On
When the Stylus is removed from the magnetic charging area on the right side
of the iPad, it will automatically power on. The battery level status can be
viewed in real-time through Bluetooth connection. Power on is complete at this
point.
Turn Off
While the Stylus is powered on, placing it back in the magnetic charging area
on the right side of the iPad will automatically turn it off and start
recharging.
Energy Saving Mode
The Stylus has a built-in intelligent power manager. When the Stylus is left
idle for 5 minutes while powered on, it will automatically power off to
prevent unnecessary battery consumption.
Real-time Battery Display
When the Stylus is powered on and connected to the iPad via Bluetooth, it will
display the remaining hattery level from 100% +∞ 1% in real_time.
Convenient to Use
During the activation process, there is no need to connect to an app. Simply
pick up the Stylus from the right side of the iPad to start using it.
Precise and Lag-Free
Stable performance ensures accurate pointing during use, with clear and lag-
free writing even for small fonts, and no accidental touch by the user’s body.
Multiple Spare Pen Tips Included You can replace the pen tip yourself,
effectively extending the lifespan of the Stylus.
Wide Compatibility
The Stylus is compatible with the following model: Supported Models Compatible
with iPad versions from 2018 to 2022
Note : Before using the Stylus, please
ensure that the screen has touch functionality and that the finger touch
drawing feature is working properly.
Maintenance
- To ensure proper use of the Stylus, please handle it with care and avoid dropping it from high places. Keep it away from high temperatures and humidity.
- Please keep the Stylus out of the reach of children, some of the small parts (such as the pen tip) are removable and may be dangerous if swallowed.
- In case of damage to the Stylus, dispose of it according to local environmental protection laws and regulations due to the built-in lithium polymer battery.
Precautions
- Do not use thick screen protectors as they may affect the sensitivity of the Stylus.
- Please keep your iPad screen dry and clean. Water or dirt may cause disconnection or delay.
- Before first use, please fully charge the battery to 100%.
Specifications
Package Included
- 1 x Stylus (spare not included)
- 1 x User Manual
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>