Traxxas 58076-74 Slash VXL Part List User Manual

: June 5, 2024
: Traxxas

Traxxas 58076-74 Slash VXL Part List

Bearings & Bushings

4607 Ball bearings (5x11x4mm) (8)
2728 Ball bearings (5x8x2.5mm) (2)
5116 Ball earings, blue rubber sealed (5x11x4mm) (2)
5114 Ball bearings, blue rubber sealed (5x8x2.5mm) (2)
2545 Bellcrank bushings (plastic) (5x8x2.5mm) (4)
1985 PTFE-coated washers, 5x8x0.5mm (20) (use with ball bearings)

Body & Accessories

1926 Antenna caps, vinyl (2)/ antenna spool
1726 Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1)
3935 Body clip (mounting clip), angled, 90-degrees (10)
3935A Body clip (mounting clip), angled, 90-degrees (black) (10)
3934 Body clips, heavy duty (12)
1914R Body mount, front & rear (black)/ body posts, 52mm (2), 38mm (2), 25mm (2), 6.5mm (2)/ body post extensions (4)/ hardware
1815 Body washers (8)
6716 Body washers, foam, 2mm (4)/ 3mm (4)/ 4mm (4)
6811 Body, Slash (clear, requires painting)/ window masks/ decal sheet
5850 Body, Slash 4X4, orange (painted, decals applied)
6811R Body, Slash, heavy duty (clear, requires painting)/ window masks/ decal sheet
6811X Body, Slash, ProGraphix® (Graphics are printed, requires paint & final color application)/ decal sheet
2514 Decal sheet, racing sponsors
5813 Decal sheet, Slas
9950 Official Team Traxxas® racing decal set (flag logo/ 6-color)
5846 Paint masks, body

Chassis & Attachments

5526 Antenna crimp nut, aluminum (blue-anodized)/ antenna nut tools
5526R Antenna crimp nut, aluminum (red-anodized)/ antenna nut tools
1914R Body mount, front & rear (black)/ body posts, 52mm (2), 38mm (2), 25mm (2), 6.5mm (2)/ body post extensions (4)/ hardware
5624 Box, receiver (sealed)/ foam pad/ silicone grease/ 3x8mm BCS (2)/ 2.5x8mm CS (2)/ 3x6mm BCS (2)
5835X Bumper, front/ bumper mount (fits 2WD Slash®) (for LED light kit installation)
5835 Bumper, front/ bumper mount, front (black)
5835P Bumper, front/ bumper mount, front (pink)
5838 Bumper, rear/ bumper mount (fits 2WD Slash®) (for LED light kit installation)
5836 Bumper, rear/ bumper mount, rear (black)
5836P Bumper, rear/ bumper mount, rear (pink)
5830 Chassis conversion kit, low CG (Slash)
5832 Chassis, low CG (black)
5832A Chassis, low CG (blue)
5832G Chassis, low CG (gray)
5822 Chassis, Slash
5822A Chassis, Slash (black)
5827 Hold down, battery/ hold down retainer/ battery post/ foam spacer/ angled body clip
5827X Hold down, battery/ hold down retainer/ battery post/ foam spacer/ angled body clip (allows for installation of taller, multi-cell batteries)
5831 Lower chassis, low CG (black)
5831A Lower chassis, low CG (blue)
5831G Lower chassis, low CG (gray)
5823 Nerf bars, chassis (black)
5833 Nerf bars, low CG (black)
5833A Nerf bars, low CG (blue)
5833G Nerf bars, low CG (gray)
5625 Seal kit, receiver box (includes o-ring, seals, and silicone grease)
5837 Skidplates, front & rear (black)
5185 Tires, rubber (2) (fits Traxxas® wheelie bar wheels)
4974 Wheelie bar arm (1)/ connector (1)/ 3×12 SS (hex drive) (4)
9464 Wheelie bar mount (heavy duty)
3678 Wheelie bar, assembled (black) (fits Slash, Bandit®, Rustler®, Stampede® series)
3678X Wheelie bar, assembled (blue) (fits Slash, Bandit®, Rustler®, Stampede® series)
3678A Wheelie bar, assembled (green) (fits Slash, Bandit®, Rustler®, Stampede® series)
3678T Wheelie bar, assembled (orange) (fits Slash, Bandit®, Rustler®, Stampede® series)
9480A Differential assembly (complete) (fits Pro Series Magnum 272R™ Transmission)
9482 Differential gasket/ x-rings (2)
9481 Differential with steel ring gear/ side cover plate/ gasket/ x-rings (2)/ 2.5x10mm BCS (4)
2380 Differential, complete (assembled) (fits 1/10-scale 2WD Rustler®, Bandit®, Stampede®, Slash)
9492 Idler gear, 30-tooth/ idler gear shaft (steel)
2381X Main diff with steel ring gear/ side cover plate/ screws (Bandit®, Stampede®, Rustler®)
9483 Output gears, differential (2)
2382 Planet gears (4)/ planet shafts (4)/ sun gears (2)/sun gear alignment shaft (1) all hardened steel
2388X Planetary gear differential with steel ring gear (complete) (fits Bandit®, Stampede®, Rustler®)
5169 Screws, 2.6x8mm countersunk machine (6)
1647 Silicone grease

Driveline Components

5116 Ball bearings, blue rubber sealed (5x11x4mm) (2)
9059X Cross pin (2)/ drive pin (2) (repairs 1 axle shaft)
9057X Differential output shafts, steel-splined constant-velocity (2)
6828A Differential output yoke assembly, extreme heavy-duty (2) (left or right, front or rear) (assembled with external-splined half shaft)
6828X Differential output yokes, heavy-duty (2)/ screw pin (2)
6852A Driveshaft assembly, rear, extreme heavy-duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)
6852X Driveshaft assembly, rear, heavy-duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)
6852R Driveshafts, rear, steel-spline constant-velocity (complete assembly) (2)
9052X Driveshafts, rear, steel-spline constant-velocity (complete assembly) (2)
9055X Half shaft, external splined (steel-spline constant velocity) (1)
6750 Half shaft, external splined (steel-spline constant-velocity) (1)
9056X Half shaft, internal splined (steel-spline constant velocity) (1)
6751 Half shaft, internal splined (steel-spline constant-velocity) (1)
6850X Half shafts, heavy duty (external splined (2)/ internal splined (2))/ metal u-joints (4)
9058X Rebuild kit, steel-splined constant-velocity driveshafts (includes pins and hardware for one axle shaft)
6757 Rebuild kit, steel-splined constant-velocity driveshafts (includes pins, dustboots, lube, and hardware)
3752 Stub axle carriers (2) (requires 5x11x4mm bearings)
3652A Stub axle carriers, Rustler®/Stampede®/Bandit® (2), 6061-T6 aluminum (blue-anodized)/ 5x11mm ball bearings (4)
3652G Stub axle carriers, Rustler®/Stampede®/Bandit® (2), 6061-T6 aluminum (green-anodized)/ 5x11mm ball bearings (4)
3652T Stub axle carriers, Rustler®/Stampede®/Bandit® (2), 6061-T6 aluminum (orange-anodized)/ 5x11mm ball bearings (4)
3652P Stub axle carriers, Rustler®/Stampede®/Bandit® (2), 6061-T6 aluminum (pink-anodized)/ 5x11mm ball bearings (4)
3652X Stub axle carriers, Rustler®/Stampede®/Bandit® (2), 6061-T6 aluminum (red-anodized)/ 5x11mm ball bearings (4)
2754 Stub axle pins (4)
6754 Stub axle, front, 5mm (steel-splined constant-velocity driveshaft) (1)
6753 Stub axle, rear, 5mm (steel-splined constant-velocity driveshaft) (1)
9053X Stub axle, rear, steel-splined constant velocity (1)
6853X Stub axles, rear, heavy duty (2)/pins (2

Front Suspension & Steering

3637 Axles (front) (2)
2728 Ball bearings (5x8x2.5mm) (2)
5116 Ball bearings, blue rubber sealed (5x11x4mm) (2)
2545 Bellcrank bushings (plastic) (5x8x2.5mm) (4)
2530 Bulkhead (front) (black)
2530A Bulkhead (front) (gray)
3632 Caster blocks (l&r) (30-degree)
3632A Caster blocks, 30-degree, blue-anodized 6061-T6 aluminum (left & right)/ suspension screw pin (2)
3632G Caster blocks, 30-degree, green-anodized 6061-T6 aluminum (left & right)/ suspension screw pin (2)
3632T Caster blocks, 30-degree, orange-anodized 6061-T6 aluminum (left & right)/ suspension screw pin (2)
3632P Caster blocks, 30-degree, pink-anodized 6061-T6 aluminum (left & right)/ suspension screw pin (2)
3632X Caster blocks, 30-degree, red-anodized 6061-T6 aluminum (left & right)/ suspension screw pin (2)
6846 Linkage, steering (3x20mm turnbuckle) (1)/ rod ends (2)/ hollow balls (2)
5347 Rod ends, Revo® (large) with hollow balls (12)
3646 Screws, 3x15mm flat-head machine (hex drive) (6)
3744 Servo saver w/adapters
3639 Shock tower (front)
3743 Steering bellcranks (l&r)/ draglink
3743ASteering bellcranks, drag link (blue-anodized T6 aluminum)/ 5x8mm ball bearings (4) hardware (assembled) (requires #3744 servo saver w/adapters)
3743G Steering bellcranks, drag link (green-anodized 6061-T6 aluminum)/ 5x8mm ball bearings (4)/ hardware (assembled)
3743T Steering bellcranks, drag link (orange-anodized 6061-T6 aluminum)/ 5x8mm ball bearings (4)/ hardware (assembled)
3743P Steering bellcranks, drag link (pink-anodized 6061-T6 aluminum)/ 5x8mm ball bearings (4)/ hardware (assembled)
3743X Steering bellcranks, drag link (red-anodized T6 aluminum)/ 5x8mm ball bearings (4) hardware (assembled) (requires #3744 servo saver w/adapters)
6845X Steering bellcranks/ servo saver/ servo saver spring/ servo spring retainer/servo horn, steering
3736 Steering blocks, left & right (2) (requires 5x11x4mm bearings)
3636A Steering blocks, Rustler®/Stampede®/Bandit® (2), 6061-T6 aluminum (blue-anodized)/ 5x11mm ball bearings (4)
3636G Steering blocks, Rustler®/Stampede®/Bandit® (2), 6061-T6 aluminum (green-anodized)/ 5x11mm ball bearings (4)
3636T Steering blocks, Rustler®/Stampede®/Bandit® (2), 6061-T6 aluminum (orange-anodized)/ 5x11mm ball bearings (4)
3636P Steering blocks, Rustler®/Stampede®/Bandit® (2), 6061-T6 aluminum (pink-anodized)/ 5x11mm ball bearings (4)
3636X Steering blocks, Rustler®/Stampede®/Bandit® (2), 6061-T6 aluminum (red-anodized)/ 5x11mm ball bearings (4)
3631 Suspension arms (front) (2)
3631X Suspension arms, black, front, heavy duty (2)
3631A Suspension arms, blue, front, heavy duty (2)
3631G Suspension arms, green, front, heavy duty (2)
3631T Suspension arms, orange, front, heavy duty (2)
3631R Suspension arms, red, front, heavy duty (2)
2640 Suspension pins, 44mm (2) w/ e-clips
3640 Suspension screw pin set, steel (hex drive) (requires part #2640 for a complete suspension pin set) (Bandit®, Rustler®, Stampede®)
2532 Tie bar, fiberglass
1935 Turnbuckles, 36mm (2)
3139A Turnbuckles, aluminum (blue-anodized), toe links, 59mm (2) (assembled w/ rod ends & hollow balls) (requires 5mm aluminum wrench #5477)
3139G Turnbuckles, aluminum (green-anodized), toe links, 59mm (2) (assembled w/ rod ends & hollow balls) (requires 5mm aluminum wrench #5477)
3139T Turnbuckles, aluminum (orange-anodized), toe links, 59mm (2) (assembled w/ rod ends & hollow balls) (requires 5mm aluminum wrench #5477)
3139P Turnbuckles, aluminum (pink-anodized), toe links, 59mm (2) (assembled w/ rod ends & hollow balls) (requires 5mm aluminum wrench #5477)
3139X Turnbuckles, aluminum (red-anodized), toe links, 59mm (2) (assembled with rod ends & hollow balls) (requires 5mm aluminum wrench #5477)
3644 Turnbuckles, camber link, 39mm (69mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right) (fits front & rear on Slash)
3745 Turnbuckles, toe link, 59mm (78mm center to center) (2) (assembled with rod ends and hollow balls)

Hardware

1926 Antenna caps, vinyl (2)/ antenna spool
1726 Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1)
3935 Body clip (mounting clip), angled, 90-degrees (10)
3935A Body clip (mounting clip), angled, 90-degrees (black) (10)
3934 Body clips, heavy duty (12)
1589 Double-sided adhesive tape (25mm x 25mm) (2)
1633 E-clips/ C-rings
2586 Screws, 3x15mm cap-head machine (hex drive) (6)
2745 Nuts, 3mm nylon locking (12)
3647 Nuts, 4mm flanged nylon locking (steel, serrated) (8)
1747 Nuts, 4mm nylon locking (10)
1747R Nuts, aluminum, flanged, serrated (4mm) (blue-anodized) (4)
1747G Nuts, aluminum, flanged, serrated (4mm) (green-anodized) (4)
1747T Nuts, aluminum, flanged, serrated (4mm) (orange-anodized) (4)
1747P Nuts, aluminum, flanged, serrated (4mm) (pink-anodized) (4)
1747A Nuts, aluminum, flanged, serrated (4mm) (red-anodized) (4)
1985 PTFE-coated washers, 5x8x0.5mm (20) (use with ball bearings)
5525 Rod ends (12)/ hollow balls (12)
5347 Rod ends, Revo® (large) with hollow balls (12)
2742X Rod ends, short (6)/ hollow balls (6)
3215 Screws, 2.5x6mm cap-head machine (hex drive) (6)
3965 Screws, 2.5x8mm cap-head machine (6)
2577 Screws, 3x10mm button-head machine (hex drive) (6) (use with #3744)
4859 Screws, 3x10mm flat-head machine (hex drive) (4)
2578 Screws, 3x12mm button-head machine (hex drive) (6)
2552 Screws, 3x12mm countersunk machine (6) (hex drive)
2579 Screws, 3x15mm button-head machine (hex drive) (6)
3646 Screws, 3x15mm flat-head machine (hex drive) (6)
2583 Screws, 3x18mm button-head machine (hex drive) (6)
2580 Screws, 3x20mm button-head machine (hex drive) (6)
2591 Screws, 3x23mm button-head machine (hex drive) (6)
2582 Screws, 3x30mm button-head machine (hex drive) (6)
2592 Screws, 3x40mm button-head machine (hex drive) (6)
2575 Screws, 3x6mm button-head machine (hex drive) (6)
3932 Screws, 3x6mm flat-head machine (hex drive) (6)
2576 Screws, 3x8mm button-head machine (hex drive) (6)
3931 Screws, 3x8mm flat-head machine (hex drive) (6)
3937 Screws, 4x12mm button-head machine (hex drive) (6)
2542 Screws, 4x12mm countersunk machine (hex drive) (6)
2546 Screws, 4x15mm countersunk machine (hex drive) (6)
2743 Set (grub) screws, 3mm hardened (12)
5529 Shim set, 3x7x1mm (2), 3x6x0.5mm (4), 3x7x2mm (2)/ hollow balls, captured (4)
3967 Shoulder screws 3×10 (6) (without threadlock)
3642X Shoulder screws, Ultra Shocks (3×12 hex drive) (6)
2754 Stub axle pins (4)
2746 Washers, 3x6mm metal (12)

LED Lights

3690 LED light bar, front (assembled)/ 3×8 BCS (2)/ 2.5×8 BCS (2) (requires front bumper #5835X for 2WD Slash®, #3635 for 2WD Stampede®, #3630 for 2WD Bigfoot® No. 1, #6835X for 4WD Slash®, or #6735 for 4WD Stampede®)
5893 LED light harness, rear (requires #5838, 6737X, 6777X, or 6836X rear bumper)
5894 LED light set, complete (includes front and rear bumpers with LED light bar, rear LED harness, & BEC Y-harness) (fits 2WD Slash®)
2263 Y-harness, BEC to LED light set

Motors & Electronics

1726 Antenna, tube (1)/ viny l antenna cap (1)/ wire retainer (1)
2260 BEC assembly (complete) (12.6 volts (3s LiPo) maximum input voltage)
3340 Cooling fan, Velineon® VXL-3s ESC
3790 Gear adapter, fixed
2072A Gear set (for 2070, 2075 serv os)
2252 Gear set, metal (for 2250, 2255 servos)
3354R Motor cov er, endbell (Velineon® 3500)
3351R Motor, Velineon® 3500, brushless (assembled with 12-gauge wire and gold-plated bullet connectors)
3352R Rebuild kit, Velineon® 3500 and 540XL (includes plastic endbell, 5x11x4mm ball bearings (2), 2.5x5mm BCS (with threadlock) (4), rear bushing)
3931 Screws, 3x8mm flat-head machine (hex drive) (6)
2254 Servo case, aluminum (blue-anodized) (middle) (for 2250 servo)
2253 Servo case, aluminum (red-anodized) (middle) (for 2255 servo)
2251 Servo case, plastic (top, middle, bottom)/ gaskets/ hardware (for 2250, 2255 servos)
2074 Servo case/gaskets (f or 2056 and 2075 waterproof servos)
2075R Servo, digital high-speed, metal gear (ball bearing), waterproof
2075 Servo, digital high-torque (ball bearing), waterproof
2250 Servo, digital high-torque 330 coreless, metal gear (ball bearing), waterproof
2255 Servo, digital high-torque 400 brushless, metal gear (ball bearing), waterproof
2075X Servo, digital high-torque, metal gear (ball bearing), waterproof
3350R Velineon® VXL-3s Brushless Power Sy stem, waterproof (includes
VXL-3s waterproof ESC, Velineon 3500 motor, and speed control mounting plate (part #3725R))
3355R Velineon® VXL-3s Electronic Speed Control, waterproof (brushless) (fwd/rev /brake)

Radio System, Batteries & Chargers

2849X 4000mAh 11.1v 3-Cell 25C LiPo Battery
2872X 5000mAh 11.1v 3-Cell 25C LiPo Battery
2842X 5000mAh 7.4v 2-Cell 25C LiPo Battery
2843X 5800mAh 7.4v 2-Cell 25C LiPo Battery
2857X 6400mAh 11.1v 3-Cell 25C LiPo Battery
2869X 7600mAh 7.4v 2-Cell 25C LiPo Battery
2976 AC to DC converter, 40W
2938X Adapter, Traxxas® iD® LiPo battery (adapts Traxxas iD batteries to separate balance ports)
5526 Antenna crimp nut, aluminum (blue-anodized)/ antenna nut tools
5526R Antenna crimp nut, aluminum (red-anodized)/ antenna nut tools
2943 Battery charge indicators (green (4), blue (4), gray (4))
6548 Battery door, transmitter (replacement f or #6516, 6517, 6528, 6529, 6530 transmitters)
2923X Battery, Power Cell, 3000mAh (NiMH, 7-C flat, 8.4V)
2926X Battery, Power Cell, 3000mAh (NiMH, 7-C hump, 8.4V)
2940X Battery, Series 3 Power Cell, 3300mAh (NiMH, 7-C flat, 8.4V)
2941X Battery, Series 3 Power Cell, 3300mAh (NiMH, 7-C hump, 8.4V)
2950X Battery, Series 4 Power Cell, 4200mAh (NiMH, 7-C flat, 8.4V)
2951X Battery, Series 4 Power Cell, 4200mAh (NiMH, 7-C hump, 8.4V)
2960X Battery, Series 5 Power Cell, 5000mAh (NiMH, 7-C flat, 8.4V)
2961X Battery, Series 5 Power Cell, 5000mAh (NiMH, 7-C hump, 8.4V)
2983 Battery/charger completer pack (includes #2969 2-amp NiMH peak detecting AC charger (1), #2923X 3000mAh 8.4V 7-cell NiMH battery (1))
2992 Battery/charger completer pack (includes #2970 iD® charger (1),
2843X 5800mAh 7.4V 2-cell 25C LiPo battery (1))
2994 Battery/charger completer pack (includes #2970 iD® charger (1),
2849X 4000mAh 11.1v 3-Cell 25C LiPo Battery (1))
2260 BEC assembly (complete) (12.6 volts (3s LiPo) maximum input voltage)
2975 Charger, DC, 4 amp (6 – 7 cell, 7.2 – 8.4 volt, NiMH)
2972 Charger, EZ-Peak® Dual, 100W, NiMH/LiPo with iD® Auto Battery Identification
2973 Charger, EZ-Peak® Live Dual, 200W, NiMH/LiPo with iD® Auto Battery Identification
2971 Charger, EZ-Peak® Live, 100W, NiMH/LiPo with iD® Auto Battery Identification
2981 Charger, EZ-Peak® Plus 4s, 8 amp, NiMH/LiPo with iD® Auto Battery Identification
2970 Charger, EZ-Peak® Plus, 4 amp, NiMH/LiPo with iD® Auto Battery Identification
6525 Communication link, telemetry expander
6512 Cov er plate, Traxxas Link™ Wireless Module
2978 Fuse, charger, 5A (2) (for #2974, 2975, 2977)
2072A Gear set (f or 2070, 2075 serv os)
2252 Gear set, metal (for 2250, 2255 servos)
2968X LiPo cell voltage checker/balancer (includes #2938X adapter for Traxxas® iD® batteries)
2968 LiPo cell voltage checker/balancer (requires #2938X adapter for Traxxas® iD® batteries)
6554X Mount, telemetry expander (fits Rustler®, Bandit®, Slash 2WD)
6535 Mount, temperature sensor (electric motors)/ wire tie/ thermal pad
6533 Receiv er, micro, TQi 2.4GHz with telemetry & TSM (5-channel)
6552 Seal kit, expander box (includes o-ring, seals, and silicone grease)
6526 Sensor, auto-detectable, temperature
6527 Sensor, auto-detectable, voltage
6520 Sensor, RPM (long)/ 3x4mm BCS (2)/ 3×4 GS (1)
6521 Sensor, temperature and voltage (long)
2254 Servo case, aluminum (blue-anodized) (middle) (for 2250 servo)
2253 Servo case, aluminum (red-anodized) (middle) (for 2255 servo)
2251 Servo case, plastic (top, middle, bottom)/ gaskets/ hardware (for
2250, 2255 servos)
2074 Serv o case/gaskets (f or 2056 and 2075 waterproof serv os)
2075R Servo, digital high-speed, metal gear (ball bearing), waterproof
2075 Serv o, digital high-torque (ball bearing), waterproof
2250 Servo, digital high-torque 330 coreless, metal gear (ball bearing), waterproof
2255 Servo, digital high-torque 400 brushless, metal gear (ball bearing), waterproof
2075X Servo, digital high-torque, metal gear (ball bearing), waterproof
6553X Telemetry expander 2.0 and GPS module 2.0, TQi radio system
6550X Telemetry expander 2.0, TQi radio system (for use only with #6551X GPS module)
6551X Telemetry GPS module 2.0, TQi radio system (for use only with #6550X telemetry expander)
6538 Telemetry trigger magnet holders, spur gear/ magnet, 5x2mm (1)/ 3x8mm CCS (3)/ 3x10mm CCS (3)
6540 Telemetry trigger magnet, 5X2mm (1)
2928 Temperature sensor, EZ-Peak Plus
6509R TQi 2.4 GHz High Output radio system, 2-channel, Traxxas Link™ enabled, TSM (2-ch transmitter, 5-ch micro receiver)
6507R TQi 2.4 GHz High Output radio system, 4-channel with Traxxas Link™ Wireless Module, TSM (4-ch transmitter, 5-ch micro receiver)
6528 Transmitter, TQi Traxxas Link™ enabled, 2.4GHz high output, 2- channel (transmitter only )
6529 Transmitter, TQi Traxxas Link™ enabled, 2.4GHz high output, 3- channel (transmitter only)
6530 Transmitter, TQi Traxxas Link™ enabled, 2.4GHz high output, 4- channel (transmitter only)
6511 Traxxas Link™ Wireless Module 3355R Velineon® VXL-3s Electronic Speed Control, waterproof (brushless) (fwd/rev /brake)

Rear Suspension

5116 Ball bearings, blue rubber sealed (5x11x4mm) (2)
6850X Half shaf ts, heavy duty (external splined (2)/ internal splined (2))/ metal u-joints (4)
3638 Shock tower (rear)
3752 Stub axle carriers (2) (requires 5x11x4mm bearings)
3652A Stub axle carriers, Rustler®/Stampede®/Bandit® (2), 6061-T6 aluminum (blue-anodized)/ 5x11mm ball bearings (4)
3652G Stub axle carriers, Rustler®/Stampede®/Bandit® (2), 6061-T6 aluminum (green-anodized)/ 5x11mm ball bearings (4)
3652T Stub axle carriers, Rustler®/Stampede®/Bandit® (2), 6061-T6 aluminum (orange-anodized)/ 5x11mm ball bearings (4)
3652P Stub axle carriers, Rustler®/Stampede®/Bandit® (2), 6061-T6 aluminum (pink-anodized)/ 5x11mm ball bearings (4)
3652X Stub axle carriers, Rustler®/Stampede®/Bandit® (2), 6061-T6 aluminum (red-anodized)/ 5x11mm ball bearings (4)
6853X Stub axles, rear, heav y duty (2)/pins (2)
2555 Suspension arms, (rear) (2)
2555X Suspension arms, black, rear, heavy duty (2)
2555A Suspension arms, blue, rear, heavy duty (2)
2555G Suspension arms, green, rear, heavy duty (2)
2555T Suspension arms, orange, rear, heavy duty (2)
2555R Suspension arms, red, rear, heavy duty (2)
3640 Suspension screw pin set, steel (hex driv e) (requires part #2640 f or a complete suspension pin set) (Bandit®, Rustler®, Stampede®)
3644 Turnbuckles, camber link, 39mm (69mm center to center) (assembled with rod ends and hollow balls) (1 lef t, 1 right) (f its f ront & rear on Slash)

Shock Oil

5031 Oil, shock (20 wt, 200 cSt, 60cc) (silicone)
5032 Oil, shock (30 wt, 350 cSt, 60cc) (silicone)
5033 Oil, shock (40 wt, 500 cSt, 60cc) (silicone)
5034 Oil, shock (50 wt, 600 cSt, 60cc) (silicone)
5035 Oil, shock (60 wt, 700 cSt, 60cc) (silicone)
5036 Oil, shock (70 wt, 900 cSt, 60cc) (silicone)
5037 Oil, shock (80 wt, 1,000 cSt, 60cc) (silicone)
5029 Shock oil bottle (60cc) (for mixing shock oil)
5038X Shock oil set (includes 20 wt, 30 wt, 40 wt, 50 wt, 60 wt, 70 wt, & 80 wt premium shock oils with spinning carousel rack)
5038 Spinning carousel rack

Shocks (Pro-level Aluminum)

2664 Big Bore shock cylinder (long) (1)
5862 Big Bore shocks (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts and springs) (front & rear) (4)
2660 Big Bore shocks (long) (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts) w/o springs (front) (2)
2662 Big Bore shocks (XX-long) (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts) w/o springs (rear) (2)
2669 Piston head set (2-hole (2)/ 3-hole (2))/ shock mounting bushings & washers (2) (Big Bore Shocks)
2362 Rebuild kit, Ultra shocks (for 2 shocks)
1942 Rod ends (16 long & 4 short)/ hollow ball connectors (18)/ ball screws (2)
2742X Rod ends, short (6)/ hollow balls (6)
2667 Shock caps, aluminum (Big Bore Shocks) (2)
1664T Shock shafts, hardened steel, titanium nitride coated (long) (2)
2656T Shock shafts, hardened steel, titanium nitride coated (xx-long) (2)
1664 Shock shafts, steel, chrome finish (long) (2)
2656 Shock shafts, steel, chrome finish (xx-long) (2)
1765 Silicone diaphragms (4)
2668 Spring retainers, upper & lower (2)/ spring pre-load spacers: 1mm (4)/ 1.5mm (2)/ 2mm (2)/ 4mm (2)/ 8mm (2) (Big Bore Shocks)
5860 Springs, front (white) (progressive rate) (2) (fits #5862 aluminum Big Bore shocks)
5859 Springs, rear (white) (progressive rate) (2) (fits #5862 aluminum Big Bore shocks)

Shocks (Ultra Shocks)

3765A Body, Ultra Shock(s) (long) (gray) (2)
3766A Body, Ultra Shock(s) (XXL) (gray) (2)
2362 Rebuild kit, Ultra shocks (for 2 shocks)
1942 Rod ends (16 long & 4 short)/ hollow ball connectors (18)/ ball screws (2)
2742X Rod ends, short (6)/ hollow balls (6) 3767 Shock caps (2)/ shock bottoms (2)
8361 Shock caps (black) (4) (assembled with hollow balls)
3767A Shock caps, aluminum (blue-anodized) (4) (fits all Ultra Shocks)
3767G Shock caps, aluminum (green-anodized) (4) (fits all Ultra Shocks)
3767T Shock caps, aluminum (orange-anodized) (4) (fits all Ultra Shocks)
3767P Shock caps, aluminum (pink-anodized) (4) (fits all Ultra Shocks)
3767X Shock caps, aluminum (red-anodized) (4) (fits all Ultra Shocks)
1664T Shock shafts, hardened steel, titanium nitride coated (long) (2)
2656T Shock shafts, hardened steel, titanium nitride coated (xx-long) (2)
1664 Shock shafts, steel, chrome finish (long) (2
2656 Shock shafts, steel, chrome finish (xx-long) (2)
3642X Shoulder screws, Ultra Shocks (3×12 hex drive) (6)
1765 Silicone diaphragms (4)
3769 Spring pre-load spacers: 1mm (4)/ 2mm (2)/ 4mm (2)/ 8mm (2)
3768 Spring retainers, upper & lower (2)/ piston head set (2-hole (2)/ 3-hole (2))
2458 Springs, front (black) (2)
2458P Springs, front (pink) (2)
5857P Springs, front (pink) (progressive rate) (2)
2458A Springs, front (white) (2)
5857 Springs, front (white) (progressive rate) (2)
3757 Springs, rear (black) (2)
3757T Springs, rear (blue) (2)
3757A Springs, rear (green) (2)
3757P Springs, rear (pink) (2)
5858P Springs, rear (pink) (progressive rate) (2)
3757X Springs, rear (white) (2)
5858 Springs, rear (white) (progressive rate) (2)
4957 Springs, red (for Ultra Shocks only) (2.5 rate) (f/r) (2)
3760 Ultra Shocks (black) (long) (complete w/ spring pre-load spacers & springs) (front) (2)
3762 Ultra Shocks (black) (xx-long) (complete w/ spring pre-load spacers & springs) (rear) (2)
3760A Ultra Shocks (gray) (long) (complete w/ spring pre-load spacers & springs) (2)
3762A Ultra Shocks (gray) (xx-long) (complete w/ spring pre-load spacers & springs) (rear) (2

Transmission Components

4607 Ball bearings (5x11x4mm) (8)
5116 Ball bearings, blue rubber sealed (5x11x4mm) (2)
9489 Cover, gear
3792 Cover, gear/ rubber gear cover plug/ 3×6 RM (2)
9480A Differential assembly (complete) (fits Pro Series Magnum 272R™ Transmission)
9482 Differential gasket/ x-rings (2)
9481 Differential with steel ring gear/ side cover plate/ gasket/ x-rings (2)/ 2.5x10mm BCS (4)
6783 Gear set, differential (spider gears (4)/ spider gear shaft (2))
9493 Gearbox halves, left & right/ differential cover (charcoal gray)
5148 Grease, white lithium
9492 Idler gear, 30-tooth/ idler gear shaft (steel)
9494 Input gear, 22-tooth/ input shaft (transmission) (heavy duty) (fits Bandit®, Rustler®, Stampede®, Slash 2WD)
9483 Output gears, differential (2)
9490 Plate, motor, blue (3.2mm thick) (aluminum)
9490X Plate, motor, blue (4mm thick) (aluminum)/ 3x10mm CS with split and flat washer (2)
9490G Plate, motor, green (4mm thick) (aluminum)/ 3x10mm CS with split and flat washer (2)
9490A Plate, motor, orange (4mm thick) (aluminum)/ 3x10mm CS with split and flat washer (2)
9490P Plate, motor, pink (4mm thick) (aluminum)/ 3x10mm CS with split and flat washer (2)
9490R Plate, motor, red (4mm thick) (aluminum)/ 3x10mm CS with split and flat washer (2)
9495 Pro Series Magnum 272R™ Transmission, complete (assembled) (fits 1/10-scale 2WD Rustler®, Bandit®, Stampede®, Slash)
5552X Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (2)/ pin/ 4.0mm NL (1)/ 5.0mm NL (1))
2554 Screws, 3x6mm cap-head machine (hex drive) (6)
3931 Screws, 3x8mm flat-head machine (hex drive) (6)
1647 Silicone grease
5556 Slipper pressure plate & hub (aluminum alloy)
9464 Wheelie bar mount (heavy duty)

Traxxas Tools

3433X Body reamer (aluminum handle)
3433 Body reamer (plastic handle)
3436 Cap, body reamer
3432 Scissors, curved tip
3431 Scissors, straight tip
8712 Speed Bit Essentials Set, hex and nut driver, 7-piece, includes premium handle (medium), travel pouch, hex drivers (straight: 1.5mm, 2.0mm, 2.5mm) and nut drivers (5.0mm, 5.5mm, 7.0mm, and 8.0mm), 1/4” drive
8721 Speed bit handle, medium (one piece)
8720 Speed bit handle, premium, large (rubber overmold)
8722 Speed bit handle, premium, medium (rubber overmold)
8710 Speed Bit Master Set, hex and nut driver, 13-piece, includes premium handle (medium), travel pouch, hex drivers (straight: 1.5mm, 2.0mm, 2.5mm, 3.0mm), (ball-end: 2.0mm, 2.5mm, 3.0mm), and nut drivers (4.00mm, 4.50mm, 5.00mm, 5.50mm, 7.00mm, 8.00mm),
8711 Speed Bit Master Set, hex driver, 7-piece straight and ball end, includes premium handle (medium), travel pouch, hex drivers (straight: 1.5mm, 2.0mm, 2.5mm, 3.0mm) (ball end: 2.0mm, 2.5mm, 3.0mm), 1/4″ drive
8719 Speed Bit Master Set, nut driver, 6-piece, includes premium handle (medium), travel pouch, and nut drivers (4.0mm, 4.5mm, 5.0mm, 5.5mm, 7.0mm, 8.0mm), 1/4″ drive
8716 Speed Bit Set, hex driver, 2-piece ball-end (2.0mm, 2.5mm), 1/4″ drive
8716X Speed Bit Set, hex driver, 3-piece ball-end (2.0mm, 2.5mm, 3.0mm), 1/4″ drive
8715m,Speed Bit Set, hex driver, 3-piece straight (1.5mm, 2.0mm, 2.5mm), 1/4″ drive
8715X Speed Bit Set, hex driver, 4-piece straight (1.5mm, 2.0mm, 2.5mm, 3.0mm), 1/4″ drive
2748R Tool set (includes 1.5mm hex wrench / 2.0mm hex wrench / 2.5mm hex wrench/ 4-way wrench/ 8mm & 4mm wrench/ U-joint wrench)
3415 Tool set with pouch (includes 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4mm drivers/ 4mm, 5mm, 5.5mm, 7mm and 8mm nut drivers/ 2mm, 4mm, and 5mm slotted screwdrivers/ #00 Phillips, #0 Phillips, and #1 Phillips screwdrivers/ 4mm and 8mm wrench/ driver handle

Turnbuckles & Threaded Rods

5525 Rod ends (12)/ hollow balls (12)
5347 Rod ends, Revo® (large) with hollow balls (12)
3139A Turnbuckles, aluminum (blue-anodized), toe links, 59mm (2) (assembled w/ rod ends & hollow balls) (requires 5mm aluminum wrench #5477)
3139G Turnbuckles, aluminum (green-anodized), toe links, 59mm (2) (assembled w/ rod ends & hollow balls) (requires 5mm aluminum wrench #5477)
3139T Turnbuckles, aluminum (orange-anodized), toe links, 59mm (2) (assembled w/ rod ends & hollow balls) (requires 5mm aluminum wrench #5477)
3139P Turnbuckles, aluminum (pink-anodized), toe links, 59mm (2) (assembled w/ rod ends & hollow balls) (requires 5mm aluminum wrench #5477)
3139X Turnbuckles, aluminum (red-anodized), toe links, 59mm (2) (assembled with rod ends & hollow balls) (requires 5mm aluminum wrench #5477)
3644 Turnbuckles, camber link, 39mm (69mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right) (fits front & rear on Slash)
3745 Turnbuckles, toe link, 59mm (78mm center to center) (2) (assembled with rod ends and hollow balls)

If you have questions or need technical assistance, call Traxxas at: 1-888-TRAXXAS (1-888-872-9927) (U.S. residents only) For orders, calls outside the U.S., and other information, call 972-549-3000, or fax to 972-549-3011 e-mail Traxxas at support@Traxxas.com If you have questions or need technical assistance, call Traxxas at: 1-888-TRAXXAS (1-888-872-9927) (U.S. residents only) For orders, calls outside the U.S., and other information, call 972-549-3000, or fax to 972-549-3011 e-mail Traxxas at support@Traxxas.com
TRAXXAS.com