Unione-Rugged UT55 Rugged Windows Tablet User Guide
- June 13, 2024
- Unione-Rugged
Table of Contents
Shanghai UniOne Science &Technology CO., Ltd.
UT55 Rugged Windows Tablet
Quick Start Guide
PANEL INDICATORS
PANEL INDICATORS 
I/O COMPARTMENT LAYOUT
INSERT/REMOVE SIM
This is how you insert and remove the micro SD/SIM
INSERT/REMOVE SSD
This is how you insert and remove the SSD You can use a T6 screwdriver to
remove the four screws below the nameplate.
INSERT/REMOVE BATTERY
This is how you insert and remove the Battery
Remove the battery and replace it
-
Turning the device on and off
To turn on the device, firmly press and hold the bottom right【Power Button】until the boot screen appears.
To turn off the device, Click on the bottom left 【windows icon】 to display the options menu. Select the Power off option to shutdown.
With the device turned on, press the 【Power Button】to turn off the screen and go into sleep mode; Press the 【Power Button】 again to wake the device, swipe upwards on the screen to unlock; If the device has been idle for a period of time, the screen will automatically turn off and go into sleep mode. -
Home screen operation
• From the home screen, you can view the device status and access the applications.
• At the bottom of the home screen is the status bar, which contains the notification area, the status area and the display area; the shortcut panel is at the bottom as shown in Figure 3.
• Customize the shortcut panel
• Using applications The main screen to see all the included applications.
• Double-click to open applications, Click right Angle X to close applications Flat panel mode switch\ network connection\ Set up the Click the icon in the lower right corner, Select relevant content respectively as shown in Figure 4 .
• Fix the application to the
start menu/start screen
How to do it: right-click the application item on the left – select “fix to start screen” on > and the application icon or tile will appear in the right area.
• Fix the application to the taskbar
Right-click an application item in the start menu – > select “pin to taskbar”
More content is displayed in the lower left corner of the start menu
More folders can be displayed in the lower left corner of the start menu, including downloads, music, images, etc
• Find applications quickly in the list of all applications
Enter the required program in the search box in the lower left corner
Notice
This device is restricted to indoor use where operated in the European.USA and
canada
Community using frequency in 5150MHz ~ 5250MHz to reduce the potential for
interference. Restriction in BE, BG, CZ, DK,DE,EE,IE,EL,ES,FR,HR,IT,CY,LV,LT,
LU,HU,MT,NL,AT,PL,PT,RO,SI,SK,FI,SE.
| BE| BG| CZ| DK| DE| EE| IE| EL| ES| FR
---|---|---|---|---|---|---|---|---|---|---
HR| IT| CY| LV| LT| LU| HU| MT| NL| AT
PL| PT| RCS| SI| SK| Fl| SE| | |
Operating Band And Maximum Power
WIFI 2.4GHz 2412-2472MHz（802.11 b, g, n20,n40）: 15.80 dBm
WIFI 5.2GHz 5180-5240MHz（802.11 a, ac20,ac40,ac80, n20,n40）: 21.85 dBm
WIFI 5.8GHz 5745-5825MHz（802.11 a, ac20,ac40,ac80, n20,n40）: 13.12 dBm
Bluetooth-BR&EDR 2402-2480MHz: 4.67 dBm / BLE: 6.04 dBm
GPS RX: 1559-1610MHz
GLONASS RX: 1559-1610MHz
BDS RX: 1559-1610MHz
The SAR limit of EU is 2.0 W/kg averaged over ten gram of tissue. has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use when properly worn on the body is 0.404W/kg. This device was tested for typical body-worn operations with the back of the handset kept 0cm from the body. The highest reported SAR for simultaneous transmission use conditions is 0.807 W/kg.
Notice
- Some special places, such as airports, hospitals, gas stations and other places, do not allow the use of electronic equipment. Please comply with the rules and do not use this product in these places.
- For your safety and the safety of others, please do not use this product while driving a vehicle.
- In order to avoid potential safety problems, do not put this product near the vehicle’s airbag.
- For your safety, please do not use this product during thunderstorms.
- Although this product is waterproof, do not leave this product for long periods of time in areas with water or moisture.
- This product has an operating temperature range of -20°C~+55°C and a storage temperature range of -30°C~+70°C. Extreme temperatures can affect the device’s performance and service life.
- Please use an original rechargeable lithium battery. Low-quality batteries will affect the performance and service life of the device, and may even have the danger of explosion.
- Although the product has been tested to withstand harsh operating environments, do use the product in an improper manner.
- Please do not disassemble this product. In case of failure, please send to our authorized service centres to proceed with repairs.
- After the device has reached the end of its service life, please discard in a proper way to avoid environmental pollution.
- When replacing the battery or during the use of an external power supply, shut down the device completely before removing the battery or disconnecting the external power supply to prevent damage.
- This product is a Class B product, which may cause radio interference. The user may be required to take necessary preventive measures.
Battery Instructions
-
This product uses a rechargeable lithium battery as a power source. When the power is low, please charge the battery. To maintain battery life, it is recommended to deplete the battery’s power before charging.
-
When the battery charger is not in use, please remove it from the power supply. Do not connect the charger to the battery for more than one week. Excessive charging will shorten the battery life.
-
Temperature affects the battery charging limit. Therefore, the battery may need to be cooled or warmed up before charging.
-
Please use the battery for its original intended purpose to prevent short-circuiting the battery. A short circuit will occur when a conductive material connects the battery’s positive and negative terminals.
-
Do not use a battery that is damaged.
-
Placing the battery in extremely cold or hot places will lead to shortened battery life.
Exposing the battery to extreme temperatures may cause the phone to malfunction, even if the battery is fully charged. -
Do not put the battery in a fire. Please discard the battery in a proper manner or take the battery to a battery recycling station. Please dispose waste batteries in accordance with local laws and regulations.
Manufacturer : Shanghai UniOne Science&Technology CO., Ltd.
Building 4,No.651 Wanfang Road, Pujiang Town, Minhang District, Shanghai
NOTICE: The SAR limit of FCC and ISED is 1.6 W/kg averaged over one gram
of tissue.
Device types UT55( FCC ID: 2A96I-UT55) has also been tested against this
limit. The highest SAR value reported under this standard during product
certification for use on the body is 0.795 W/kg, and 1.383 W/kg for
simultaneous transmission use conditions. This device was tested for typical
body – worn operations with the back of the Device Keep 0 cm from the body. To
maintain compliance with FCC and ISED RF exposure require-ments,use
accessories that maintain a 0 cm separation distance between the user’s body
and the back of the Device. The use of belt clips, holsters and similar
accessories should not contain metallic components in its assembly. The use of
accessories that do not satisfy these requirements may not comply with FCC and
ISED RF exposure requirements, and should be avoided.
Working Temperature: -20℃ ~ +55℃
Storage Temperature: -30℃ ~ +70℃
Charging mode need to operate indoors, please pay attention to the environment
temperature should be -0℃ ~ +40℃
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS Hereby, [Shanghai
UniOne Science&Technology CO., Ltd.] declares that the radio equipment type
[UT55] is in compliance with Directive 2014 / 53 /EU.
The full text of the EU declaration of conformity is available at the
following internet address: http://en.unistrong.com/declaration.html
NOTICE:
This device complies with Part 15 of the FCC Rules and with RSS-210 of
Industry Canada.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
NOTICE:
Changes or modifications made to this equipment not expressly approved by
Shenzhen
UniStrong
Science & Technology Co.,Ltd. may void the FCC authorization to operate this
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
NOTICE:
This Class [B] digital apparatus complies with Canadian ICES -003.
RF mode and power tune-up refer to appendix A
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>