Suncast BMS5700 Outdoor Storage Shed Instruction Manual

Suncast BMS5700 Outdoor Storage Shed

Product Information

• The BMS5700 Shed is a storage shed manufactured by Suncast Corporation. It is designed to provide a durable and convenient storage solution for outdoor items.
• The shed comes with an assembly manual that provides step-by-step instructions for setting it up. It is important to follow these instructions carefully to ensure proper assembly and prevent damage to the shed.
• The shed is made of plastic material that is resistant to outdoor elements such as rain, sun, and moisture. It is recommended to clean the shed annually with mild soap and water to maintain its appearance. Harsh cleaners and stiff bristle brushes should not be used as they can cause permanent staining of the plastic.
• The BMS5700 Shed kit includes all the necessary hardware for assembly. Some extra small fasteners may be included, which are not required for assembly.
• Site preparation is recommended before setting up the shed. Placing the shed on a constructed foundation is highly recommended to prevent settling and potential damage. Suncast is not responsible for any damage or loss caused by incorrect assembly or the absence of a constructed foundation.

Product Usage Instructions

1. Before beginning assembly, make sure to read and understand all instructions provided in the manual.
2. Ensure you have all the tools required for assembly.
3. For additional assistance, scan the QR code provided in the manual to access a product assembly video.
4. Register your product within 90 days of purchase to avail of the limited warranty.
5. If you have any questions or need help, visit the resource library at https://support.suncast.com or contact the Suncast Contact Center at 1 800-846-2345.
6. Clean the shed annually with mild soap and water. Do not use bleach, ammonia, or other caustic cleaners, and avoid using stiff bristle brushes.
7. Follow the assembly instructions provided in the manual carefully, taking note of the orientation of the parts shown.
8. Ensure site preparation and foundation construction are completed before unpacking and assembling the shed.
9. For tips on site preparation, refer to the website www.suncast.com or consult a retailer or local code.

Tools Required

Register your product for Limited Warranty!

Must register product within 90 days of purchase for limited warranty

Scan for updated Limited Warranty

www.suncast.com/warranty or call US 1 800-846-2345

Have Questions?

• We are here to help. Check out our resource library along with helpful tips, videos and FAQ’s at https://support.suncast.com
• You may call the Contact Center directly at: 1 800-846-2345 or write Suncast Corporation, Contact Center, 701 N. Kirk Road, Batavia, IL 60510 (USA)

Before You Begin

• Consult your local authorities for any permits required to construct shed.
  Prior to the construction of y our shed, check with the local building code official to review any required permits or building limitations.

• A level and sturdy foundation is recommended before shed construction can begin.
  Review the site preparation information within the manual before beginning assembly.

• Read instructions thoroughly prior to assembly.
  This kit contains parts that can be damaged if assembled incorrectly or in the wrong sequence.

• Please follow instructions.
  Suncast is not responsible for replacing parts lost or damaged due to incorrect assembly.

• Check for all parts before you begin assembly.
  Using the parts page(s) provided within this manual, verify all parts are present. COMPLETE SITE PREPARATION AND FOUNDATION CONSTRUCTION BEFORE UNPACKING ALL PARTS.

• Assistance is required during entire assembly

Caution

• Proper site preparation required.
• Shed not intended for use in extreme weather conditions.
• Shed not intended for storage of flammable or caustic chemicals.
• Store heavy items near the bottom of shed.
• Shed not intended for use by children.
• DO NOT stand, sit, or store items on storage shed roof.
• Treat carefully in extreme temperatures.
• Repair or replace broken parts immediately.
• Suncast is not responsible for damage caused by weather or misuse.
• At regular intervals inspect your shed to make sure that assembly integrity has been maintained.
• Periodically check that the location you have chosen to set your shed is still level.
• This kit contains parts with metal edges. Please be careful when handling.
• If shed is empty and outdoors, place weight inside on floor to prevent tipping in high winds.

Care Instructions

• Hot items, such as recently used grills, blowtorches, etc., must not be stored in the shed.
• Heavy articles should not be leaned against the walls, as this may cause panel distortion and permanent damage.
• Keep roof clean of snow and leaves.
• Your product is made of materials that will withstand outdoor use. Exposure to the elements (such as dust, plant and animal life, moisture and sunlight) encourages moss, algae, and mold to grow on outdoor items. To maintain the look of your product, we recommend cleaning it each year with mild soap and water. DO NOT use bleach, ammonia, or other caustic cleaners, and DO NOT use stiff bristle brushes. Failure to perform annual cleaning could result in permanent staining of the plastic. This is not a manufacturing defect and is not covered under warranty.

Assembly Day Tips

• This item uses self-tapping screws in some areas. There are no pre-drilled holes in the plastic. Use force when starting to drive the screw. Once the screw pierces the plastic it will drive easier.
• Complete site preparation and foundation construction before unpacking parts and beginning assembly.
• DO NOT attempt to assemble on a day with strong winds.
• DO NOT attempt to assemble on days when temperature is below 32 degrees.
• Set aside appropriate amount of time to completely assemble shed.
• Make sure you have assistance nearby to lift and secure parts in place.
• Wear light duty work gloves while assembling shed.
• Once roof is assembled, a flashlight may be of use when assembling smaller components inside shed.
• Suncast provides extra hardware for small fasteners for customer convenience. In some cases, there will be extra small fasteners once the assembly is complete.
  Note: This product contains parts that are used in different orientations to construct the shed. Please take note of the orientation of the parts shown throughout this instruction manual. Failure to follow instructions could result in damage to parts. Suncast is not responsible for replacing parts lost or damaged due to incorrect assembly.

PARTS

WALLS AND FLOOR
Before getting started, ensure the package contains the following components. Parts shown may vary in style or color from the actual product.

Roof and Doors
Before getting started, ensure the package contains the following components. Parts shown may vary in style or color from the actual product.

Hardware

Site Preparation and Platform Construction

Materials NOT supplied with BMS5700 Shed Kit
Note: Site preparation is recommended for this shed. Placing the shed on a constructed foundation is highly recommended. Without a constructed foundation, settling could occur, causing distortion and damage to the shed. Suncast is not responsible for replacing parts damaged or property lost due to incorrect assembly. Warranty requires foundation.
Note: Complete the site preparation and foundation construction before unpacking parts and beginning assembly.
For tips on site preparation, go to www.suncast.com, consult retailer, or local code.

To prepare your shed site, follow the below steps:

1. Consult your local authorities for building codes and covenants before beginning foundation or erecting shed.

2. Before any digging, check with local utilities to determine location of buried cables, pipes, etc.

3. Decide which type of foundation you want:

   • Concrete slab, 4″ thick
     OR

   • Wood platform
     Use exterior grade wood. The wood platform should be set on pier blocks or footing. Consult your local retailer for help to determine the best anchoring method for your particular installation. The provided plans are sized for the minimum number of cuts to lumber and plywood.

4. Prepare the building site:

   • The ground should slope away from the foundation area to provide drainage.
   • The foundation surface must be flat and level.
   • A vapor barrier should be provided to prevent excessive condensation in the shed.
   • Follow local building codes for a proper vapor barrier.

5. Anchoring the shed to the foundation:

   • Consult your local retailer for help to determine the best anchoring method for your particular installation.
   • To secure the shed to a concrete slab, use masonry fasteners available at your local hardware retailer.
   • To secure the shed to a wood platform, use 1/4″ x 3″ long lag screws with washers.

Anchoring floor panel to concrete slab

• Secure shed to concrete slab using masonry fasteners.
• Dimensions allow for shed to fit within the nearest 1 ” on each side.

Anchoring floor panel to wood platform
Secure shed to wood platform using 1/4″ x 3″ lag screws.

Wood platform critical spacing

Wood platform materials list

Wood platform materials list

I

A         1

| 31 1/2″ X 51 1/2″ X 3/4″

2″    6″   51 1/2″

---|---
B             2| X       X

2″    6″   28 1/2″

C          6| X       X

Optional wood shelf (materials not included)

• Three optional wood shelves can be added to your Suncast storage shed.
• Cut shelves from 3/4″ thick wood using dimensions above.
• Drill one 3/16″ pilot hole on each side of shelf.
• See page 30 for wood shelf installation instructions.

Assembly-Walls

1. Align tab on bottom of left side panel (B) with slot on floor (A). Lower panel into slot.
   Note: Suncast logo faces up on floor.

2. Lock left side panel (B) in place by sliding panel toward rear.
   Note: Use a rubber mallet to “push” left side panel (B) into locked position.

3. Align tabs on side of left back panel (C) with slots on the left side panel (B). Slide back left panel toward the left side panel.

4. Lower the back left panel (C) tabs into the slots of floor (A). The back left panel tabs will ‘snap’ into place when in correct position.

5. Align tabs on bottom right side panel (E) with slots on floor (A). Lower panel into slots.

6. Lock side panel (E) by sliding panel toward rear of floor panel (front corner tab will slide over floor and into position).
   Note: Use a rubber mallet to ‘push’ right side panel (E) into locked position.

7. Tilt right panel (E) outward.

8. At an angle, align tabs on side of right back panel (D) with slots on right side panel (E). Slide back right panel in and down into right side panel to secure.

9. Tilt right back panel (D) and right side panel (E) back into the upright position (lowering the back right panel tabs into the slots of floor (A)). The back right panel tabs will ‘snap’ into place when in correct position.

10. Secure backs panels (C, D) together with eight screws (11).
    Note: Right side panel not shown for clarity.

11. Install bolt (MM) and one washer (LL) on outside top of back panels and a second washer (LL) and nut (KK) on inside top of back panels.

Note: At least two people are needed during assembly.

12. Insert door latch housing (EE) into bottom right door (G) and snap into place. Insert door latch (FF) into door latch housing. Push latch pin down so it is fully seated in latch housing. Push down with force until you hear a snap. Slide latch up and down to confirm it slides properly.

Before proceeding, please take notice of teeth on housing that will face downward when installed on bottom of right door.

13. Stand right door (G) upright with hinge mounts facing right. Slide one metal hinge plate (BB) onto each hinge mount. Rotate metal hinge plates to open position.
    Repeat for left door (F).

14. Slide one metal hinge plate over each hinge receptacle on inside of left side panel.

15. Secure each door hinge with one screw (CC). Repeat Steps 14-15 for right door (G).

16. Insert one hinge half (DD) into left back panel (C) and rotate up.

17. Insert second hinge half (DD) and rotate up. Push the two hinge halves together.
    Repeat Steps 16 and 17 to attach remaining hinge halves to right back panel (D).

18. Lower angle support bracket (J) into position on lid (H). Attach, through pre-drilled holes, using six screws (II). There are no pre-drilled holes on the lid. Use force when starting to drive screws. Once the screw pierces the plastic, it will drive easier.

19. Attach door clip bracket (JJ) to bottom of roof (H) using two screws (11).

20. Lower roof (H) and line up both hinge halves (DD) with holes. Press roof into place. You will hear a snap when engaged.

21. Attach handle (I) to left door (F) using two screws (II). Repeat for right door (G).

22. Install clip bracket (JJ) to left side panel (B) using two screws (11).

23. Secure clip bracket (JJ) to underside of roof panel (H) using two screws (II). Repeat steps 22-23 for right side panel and remaining clip bracket (JJ).

24. Complete.

Optional Wood Shelf Installation

1. Place shelf into shed. Shelf must be completely seated into shelf supports on side and back panels.
   Note: See page 12 for shelf dimensions. Up to three shelves can be installed. Shed roof is removed from illustration for clarity.

2. To secure shelf, insert one #8 x 1.25″ drywall screw (not provided) through each pilot hole and into side panels.

References

• Home page - Suncast® Corporation
• Suncast Limited Warranty Information - Suncast® Corporation

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>