CITIZEN YF30 Hybrid Smart Watch Instruction Manual

: June 13, 2024
: Citizen

Table of Contents

Component identification
About the display of the watch
Before connecting with a smartphone
Requirements for connection
Operating the menu on the watch
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

YF30 Hybrid Smart Watch
Instruction Manual

To see details of specifications and operations, refer to the instruction manual: YF30 instruction manual

Component identification

CITIZEN YF30 Hybrid Smart Watch - Component
Idenntification

Actual appearance may differ from the illustrations.

About the display of the watch

This watch is equipped with an electronic paper display. Owing to the display, the watch can always indicate various information with little consumption of power reserve. On the other hand, unlike an ordinary LCD, indication is not always renewed. To see current total steps or other real-time data, you need to renew indication intontinnnlly

Renewing indication on the display

CITIZEN YF30 Hybrid Smart Watch - Display

Twist your wrist quickly, and the hands on the watch move and the indication on the display is refreshed.

Try the twist again if the hands do not move.

Turning on the light

Tap the center of the display twice to turn on the light.

The light is turned off automatically without any operation.

Indicating notifications

Press and hold the lower button ® of the watch to indicate notifications on the display of the watch.

For details of notifications, see the instructiom manual.

Hiding information on the display

You can hide information on the display by pressing and holding the upper button C of the watch.

You can also hide the information through the settings of the watch. For details, see the instruction manuaL

Before connecting with a smartphone

You must install the dedicated app “CITIZEN CONNECTED” on your smartphone and start it to make pairing between the phone and the watch to connect them.

CITIZEN YF30 Hybrid Smart Watch - Connecting

The flow of connection is as follows.

This watch communicates with smartphrma though Bluetooth’ Low Energy power-saving communication technokly
The Bluetooth* word mark and togas an registered trademarks owned by Bluetooth SIG. Inc.
Google. \”eu OS by Go4e. Goo Play and Google Play kgct Goo I n. GoogIc Assistant. Goo* r:akndar. Android and Android Go Edition. Android One. Google Puck Goole< Nest Thermostat We trademarks of GoogIc
IoS is a trademark or regoten-d trademark of isco Sygems, Inc se its affiliates in the United Stain and other contows. and is used under Ixense.

Requirements for connection

Android	Android 05 7.0 –
iPhone	105 15.0 –
Bluetootho	Bluetooth smart/4.2 Low Energy

You cannot install the dedicated app when your smartphone is not compatible with it
The app may not be warranted to work correctly even when your smartphone fulfills requirements.
Update of the dedicated app may be ceased after the end of production of the watch.

Actual screens and/or indication of the dedicated app may differ from those on this manual depending on your usage conditions and/or changes of specifications at update of the app. in that case. follow instructions on the actual screen of the app.

Execute pairing with the smartphone

Execute pairing at first when connecting the watch and your smartphone.

Unique pairing information is saved on the Watlt and smartphone as palling is executed.
Make an account at the startup of the dedicated app. An e-mail address which can be used for e-mail reception is required for making an account.
Keep the mail addressand password for the account in case they are required. Execudncpaiting
For pairing. you have to operate both the watch and the smartphone.
Charge the watch and the smartphone sufficiently beforehand.
Turn on Bluetooth’ and fundWOO related with location information on your smanphone.

Download the dedicated a pp”CITIZ EN CONNECTED” at an app site and install it.
Start the dedicated app.
• Keep the app screen displayed until pairing is finished
Tap (HYBRID].
Make an account. • promceed to authentication after making an account. Authentication number is sent to the mail address you entered here
• Tap !LOG INI if you had logged out without executing pairing after making an account before.
• Once signed in. the status (login status) is kept regardless whether the app is activated or deactivated.
Press the middle button g and tap [CONTINUE] on the screen of the app as the [START PAIRING] screen is shown.
Tap [THIS IS MY WATCH]

• The uatch displayed on the screen may look different from the actual one you use.
• Tap II DON’T SEE MY WATCH] when not only its color but whole appmranceloolcsdifferent from yours.
• When update of the watch has started, wait until it is finished.

Press and hold the middle button ® of the watch within time Imit Pairing starts.

When pairing finished uccessfully

The screen of finish is displayed.

CITIZEN YF30 Hybrid Smart Watch - watch
To start pairing on the screen of the app
Tap the watch icon ( ) on the upper right of the home screen, swipe left on the [CHOOSE DEVICE] screen and lap [ADD NEW WATCH]. CITIZEN YF30 Hybrid Smart
Watch - fig6

When pairing falls

When pairing fails and the target watch does net appear on the dedicated app. try pairing again following the steps below.

Remove “Citizen Connected HR 1″ on Bluetooth” setting of your smartphone.
Turn off the Bluetooth function on your smartphone and turn it on again.
Execute pairing between the watch and the smartphone again.

When connection fails after pairing (canceling pairing)
Try pairing again following the steps below

Tap the watch icon (0) on the upper right of the home screen.
Swipe left or right on the [CHOOSE DEVICE] screen to display the watch with which you want to connect your smartphone.
Swipe up the bottom tab on the (CHOOSE DEVICE] screen to display the menu.
Tap [REMOVE WATCH].
Remove “Citizen Connected RR 2.1″on Bluetooth setting of your smartphone.
Turn off the Bluetooth function on your smartphone and turn it on again.
Execute pairing between the watch and the smartphone again.

Synchronizing your watch and smartphone

Once paired. the watch and the smartphone are connected and start to syndironize their data automatkally as the dedicated app is started or displayed.

All the hands of the watch tum fully around when synchronization starts.
The time and calendar on the watch are also synchronized with those on the smartphone.
It may take a certain period ot tine for data synchronization.
Some operations of the app such as change of settings are accompanied with data synchronization.
Synchronization does not start when the watch is not charged enough.
Synchronization does not start when distance between the smartphone and the watch is 10 m(33 feet) or more a there is any obstacle between them.
Swiping down the IHomel screen also starts data synchronizationb

Adjustment of the time and calendar

This watch receives lime information from your smartphone at every connection and adjusts the time and calendar automatically

You cannot adjust time and calendar on the watch only by itself.

You can modify settings for the watch and utilize its various functions by using the menu on the watch. Here we introduce the basic procedure to use the menu on the watch.

For more information on the settings on the watch and other functions. refer to `About the menu on the watch” and Settings on the watch body” on the online guide.
Some functions are not available without connection between the watch and the smartphone through die dedicated app.

Press and hold the middle button g of the watch.
The hands of the watch point one of the function icons on the display. • (Home] is pointed immediately after indication.
• The indication automatically returns to normal indication in 3 minutes without executing any operation.
Press and release the lower button A or the upper button of the watch repeatedly to switch the function to use. The hand. of the watch point one n( the function
• Press and hold the lower button ‘,23. or the upper button ) of the watch to move the hands continuously.
• The black icon in a white circle shows the function currently chosen. Function icons move left or right
Press the middle button@ of the watch. Indication on the display is switched to that for the function you chose.
• Sonic functions starts working immediately
■ To return to normal indication
Press and hold the middle buttoni of die watch to realm to normal indication.
• When you have returned to the menu from settings of an item press and hold the middle button a again.