Size 4 Complete Baby Monitoring System Masimo Stork Boot User Guide
- June 13, 2024
- STORK
Table of Contents
Size 4 Complete Baby Monitoring System Masimo Stork Boot
What’s in the box?
-
Sensor
-
Sensor Charge Cable and Cable Clip
-
Medium Boot (Size 4 Strap Pre-Attached)
-
5W Sensor Charge Adapter
-
5W Sensor Charge Adapter
-
Size 1 and Size 2 Straps
Not intended for use as a medical device or to replace a medical device. Do not use it to diagnose, cure, treat, alleviate, or prevent any disease or health condition.
Charge the sensor
Plug the Sensor Magnetic Charge Cable into the 5W power adapter.
Connect the magnetic end of the cable to the sensor. Fully charge the sensor before use.
Peel and stick the cable clip to secure the sensor charge cable.
Pair the sensor to the app
Download the Stork app and follow instructions.
The app screens shown in this document might differ from the actual ones displayed in the app
Add straps to sensor and boot
Insert Sensor Into Small Boot
Apply Boot to Either Foot
Check the Strap Length
Too long (Velcro not on fabric)
Perfect!
Too short
Boot Sizing (Using Small Boot As Example)
IMPORTANT NOTE
Make sure all sensors are making good contact with the baby’s skin to ensure correct measurement.
Strap Tightness
Boot and sensor maintenance
Remove Sensor
To remove the sensor, push it from the opening at the bottom of the boot.
Cleaning Sensor and Boot
Remove the sensor and place just the boot (and the straps if desired) in the washing machine.
Dampen a cloth with water to wipe the components of the Stork System (sensor is shown in the example). Bleach wipes or 70% isopropyl alcohol can also be used. Do not use household cleaning agents.
OWNER’S MANUAL
Refer to the online manual for other functions, information, and operation
details. masimostork.com/vitals-plus-user-manual
