Whirlpool WB70803-1 7kg Top Load Washing Machine User Guide

WB70803-1 7kg Top Load
Washing Machine
User Guide

OPERATING INSTRUCTIONS

WARNING

Fire Hazard
Never place items in the washer that are dampened with gasoline or other flammable fluids.
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on it (including cooking oils).
Doing so can result in death, explosion, or fire.

WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS, located in your appliance’s Owner’s Manual, before operating this appliance.

STEP 1. ADD THE DETERGENT

Designed to use only HE (High Efficiency)detergents.

NOTE: See ADDING LAUNDRY PRODUCTS (below) for more information on adding HE detergent, fabric softener, and/or bleach.

STEP 2. LOAD CLOTHES

For best results, load garments in loose heaps evenly around the basket wall.

STEP 3. PRESS POWER TO TURN ON THE WASHER

STEP 4. **SELECT THE DESIRED CYCLE FOR YOUR LOAD***

STEP 5. ADJUST CYCLE SETTINGS, IF DESIRED

STEP 6. **SELECT ADDITIONAL OPTIONS***

STEP 7. PRESS AND HOLD START/PAUSE TO BEGIN THE CYCLE

NOTE: Start button must be held for 1 second to start the cycle. Once the status lights are illuminated, release the start button.

*Not all cycles, settings or options are available with all models.

ADDING LAUNDRY PRODUCTS
IMPORTANT: Using non-HE detergent will likely result in longer cycle times and reduced rinsing performance. It may also result in component malfunction and, over time, the buildup of mold or mildew. HE detergents should be low-sudsing and quick-dispersing to produce the right amount of suds for the best performance.

ADDING THE DETERGENT TO THE BASKET

Add a measured amount of HE detergent or single-dose laundry packets into the basket. If using oxi-type boosters, color-safe bleach, or fabric softener crystals, add them to the bottom of the washer basket before adding clothes. NOTE: Follow the manufacturer’s instructions to determine the number of laundry products to use.

ADDING LIQUID CHLORINE BLEACH

Do not overfill, dilute, or use more than 1 cup (236 mL). Do not use color- safe bleach or oxi products in the same cycle as liquid chlorine bleach.

ADDING LIQUID FABRIC SOFTENER

If you desire to use liquid fabric softener with this washer, Whirlpool suggests using the Downy Ball ® dispenser. Pour a measured amount of liquid fabric softener into the Downy Ball ® dispenser, pull the ring tightly to seal it, and place it on top of the load. Follow the manufacturer’s directions for the correct amount of fabric softener based on your load size. Then use the Rinse Options button to select Fabric Softener. The Downy Ball ® dispenser will automatically release the fabric softener at the correct time in the cycle. For suggestions on using the Downy Ball ® dispenser visit www.downy.com.

ADDING LIQUID FABRIC SOFTENER MANUALLY
Select the Fabric Softener option on the control panel before starting a cycle.
During the final rinse, wait until the washer has completed filling, and press the Start/Pause button to pause the washer. Lift the lid and add the recommended amount of liquid fabric softener. Close the lid, press and hold the Start/Pause button to resume the cycle.

CONTROL PANEL AND FEATURES

*Appearance may vary depending on the model.

1. POWER
   Press to turn on/off or to stop/cancel a cycle.

2. CYCLE KNOB
   Turn the knob to select the desired cycle.

3. START/PAUSE
   Press and hold the Start/Pause button for 1 second until all status lights are illuminated, then release to start the cycle. Press during a cycle to pause the cycle and unlock the lid.
   NOTE: If the machine is spinning it may take longer to unlock the lid.

4. CYCLE MODIFIERS (Not all modifiers are available on all cycles)
   TEMP
   Press to modify the cycle’s available temperatures (Tap Cold, Cold, Cool, Warm, or Hot).
   NOTE: Pressing Temp will toggle through available temperature options. When no lights in the temperature column are illuminated the selected temperature is Tap Cold.

RINSE OPTIONS
Press to modify the cycle’s available rinse options. Press once for Fabric Softener, twice for Extra Rinse, and three times to activate both.

• FABRIC SOFTENER
  Select this option to let the machine know when you have added liquid fabric softener.

• EXTRA RINSE
  Select this option to add a second rinse.

OPTIONS
Press to add or remove options for each cycle. Press once to add a 30 min PreSoak, twice to activate Deep Water, and three times for both.

• DEEPWATER
  Use this option to automatically add more water to your wash cycle.
  You can also use this option to reduce the likelihood of white residue on dark clothing.

• 30 MIN PRESOAK
  Touch to add a 30 minutes presoak period to help loosen tough stains. The washer will fill, pause to soak, and then begin the selected cycle.

FAUCET
Press to access an instant water stream. Use this feature to retreat clothes and other items right in the washer. You can also use this feature to manually add water to the machine as desired.
NOTE: The washer will drain at the beginning of the cycle if a large volume of water is detected to ensure the machine can correctly sense the load size.
NOTE: If the washer detects an out-of-balance condition it may pause and attempt to correct the situation. During this time the Sense and Wash status indicators will both briefly illuminate.
WARNING : Do not wash water-resistant or water-repellant-type clothing.
Failure to closely follow these instructions may result in an abnormal vibrating and out-of-balance condition that could result in physical injury, property damage, and/or appliance damage.

CHOOSING THE RIGHT CYCLE

A cycling guide for your washer can be found online at www.whirlpool.com.
The document will help identify which cycle to choose for various load types as well as the default cycle options.
For example, we recommend using the NORMAL cycle with Warm water for cotton, linens, and mixed-garment loads.

PRE-TREATING BEFORE A WASH CYCLE

• Press the Faucet button once to turn it on and press it again to turn it off.
• The faucet will automatically shut off after 10 minutes or when the max water level is reached.
• Water will automatically drain if the water level becomes too high. Water will also drain after 10 minutes if the lid is left open or 3 hours if the lid is left closed.

MORE WATER WHEN YOU WANT IT

AUTO-SENSING AND DEEP WATER

• The washer will adjust the water level to the optimal amount for a High-Efficiency wash of the detected load size.
• Press Deep Water to automatically add more water to your wash cycle.
• It is recommended to use the BULKY ITEMS cycle with the Deep Water option for loads where the maximum water level is desired.
• Expect longer cycle times due to extended fill duration when using the Deep Water option.

CLEANING WITH LESS WATER

The washer has been designed and optimized to provide a thorough cleaning using less water to conserve energy and resources.
As the washer dampens and moves the load, the level of the items will settle in the basket. This is normal and does not indicate that more items should be added.
IMPORTANT: You will not see a full basket of water as with older, less efficient washing machines. It is normal for some of the load to be above the water line.

For detailed installation instructions and maintenance information, winter storage, and transportation tips, please see the Owner’s Manual included with your machine.

ASSISTANCE OR SERVICE AND ADDITIONAL INFORMATION

For information on any of the following items, a full cycle guide, warranty, detailed product dimensions, or complete instructions for use and installation, please visit www.whirlpool.com/owners, or in Canada www.whirlpool.ca/owners. This may save you the cost of a service call.

Register Product| Schedule Service| How To’s & FAQ| Manuals &
Downloads| Add Service Plan| Parts| Accessories
---|---|---|---|---|---|---
| | | | | |

To speak with a customer service representative or if you have additional questions, call us toll-free at 1-866-698-2538, or in Canada call 1-800-807-6777.
You can write with any questions or concerns at:

Whirlpool Brand Appliances
Customer Experience Center
533 Benson Road
Benton Harbor, MI 49022-2692| Whirlpool Brand Appliances
Customer Experience Center
Unit 200-6750 Century Ave
Mississauga, Ontario L5N 0B7
---|---

Please include a daytime phone number in your correspondence.

W11428539D

® /™ ©2022 Whirlpool.
All rights reserved.
Used under license in Canada.

References

• Welcome to Whirlpool® Customer Care | Whirlpool

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>