VERSAILLES CRS093663-5 Cordless Linen Fabric Blackout Roll Up Blinds Instruction Manual

VERSAILLES CRS093663-5 Cordless Linen Fabric Blackout Roll Up Blinds

Product Information

The Cordless Roman Shade is a window covering that provides privacy and light control. It comes with the following components:

• Roman Shade (1)
• Mounting brackets (2)
• Screws (4)
• Wall plugs (4)
• Handle (1)

Product Usage Instructions

1. To raise and lower your cordless blind:
   • Hold the bottom rail of the rear roller shade in the middle. For wider blinds, you may use both hands.
   • To raise the blind, simply tug lightly on the bottom rail to activate the spring roller.
   • To lower the blind, gently pull the bottom rail to the desired height.
2. Care instructions:
   • Clean the cordless shade using a damp cloth or vacuum with proper attachments or duster.
3. Mounting the blind:
   • Install the mounting brackets using the provided screws and wall plugs.
   • Position the inner front edge of the head rail into the front of the mounting bracket.
   • Push the back of the rail to snap into the bracket metal clip until you hear a click.
4. Installing the handle:
   • Attach the handle onto the rear roller shade at the midpoint of the shade.

PACKAGE CONTENTS

1. Roman Shade (1)
2. Mounting brackets (2)
3. Screws (4)
4. Wall plugs (4)
5. Handle (1)

TOOLS REQUIRED

HOW TO USE WALL PLUGS

HOW TO OPERATE A CORDLESS SHADE

1. To raise and lower your cordless blind: Hold the bottom rail (of the rear roller shade) in the middle (you may use both hands on wider blinds). To raise, simply tug lightly on the bottom rail to activate the spring roller. To lower, gently pull the bottom rail to the height desired (as shown in the graphic).
2. Care instructions: Clean using a damp cloth or vacuum using proper attachments or duster.

INSTALLATION GUIDE

1. Choose inside mount or outside mount
2. Mounting brackets position
3. Pre-drill holes for easy installation
4. Mount the brackets
5. Mounting the blind
   • Position the inner front edge of the head rail into the front of the mounting bracket. Push the back of the rail to snap into the bracket metal clip until you hear a click.
6. How to operate a cordless shade
   • Install the handle onto the rear roller shade, in the middle point of the shade.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>