OptiMATE NVR-02 Rectangular Connectors Housings Housing RoHS User Guide
- June 4, 2024
- OptiMATE
Table of Contents
NVR-02 Rectangular Connectors Housings Housing RoHS
User Guide
GENERAL INFORMATION
1.1 PACKAGE CONTENTS
- ONX Light
- Power Cable
- Ethernet Cable
- Installation Material
- Quick Start Guide
1.2 INSTALLED SOFTWARE
- Ubuntu Server 20.04 LTS
- Network Optix Mediaserver
- Webmin
1.3 PHYSICAL CONNECTORS
- 1 x DC Power
- 3 x USB-A 3.0
- 1 x HDMI 2.0 (3840×2160@60Hz)
- 2 x RJ-45 (10/100/1000Mbps)
- 2 x SATA
FIRST USE
2.1 INITIALIZATION
The first time that you start the device, it will wait for the completion of
the initialization procedure. This procedure takes only a few minutes to
complete and can not be skipped.
During this procedure, you will be asked to change the password for the
administrator user and you will receive the option to have any installed
storage disks configured as a logical volume automatically.
Only when these steps have been completed will the media server be started,
after which you can go through the configuration of the Nx Witness system.
To start the initialization procedure, you will need to either connect the
device to a display and keyboard using the HDMI- and USB ports found on the
device.
If there is no possibility to do so, you may also use SSH to complete the
procedure.
In that case, make use of the command prompt or a PowerShell window to connect
to the device using the command found below.
Replace the part marked using green text with the IP address of the device.
ssh administrator@
Then log in using the default login credentials as found below.
| Username | administrator |
|---|---|
| Password | password |
Now follow the steps as displayed on the screen to complete the first start-up
procedure.
Navigation is done using the Tab- and Arrow keys, while selection and
confirmation are done through the Enter key and Spacebar.
NETWORK CONFIGURATION
3.1 CHANGING THE IP ADDRESS
Scan the QR code to view the instructional video for this section.
It’s less than 10 minutes long and guides you through all the necessary steps.
WARRANTY AND SUPPORT
4.1 TECHNICAL SUPPORT
Do you require technical support?
Send us an e-mail with your invoice- and/or serial number to
[email protected]
Or call our helpdesk on +32 3 246 51 03
Available from Monday to Friday between 8:30 and 17:00
4.2 WARRANTY & RETURNS
In case you wish to register a product for RMA, please fill in our RMA form,
which you can find on our website:
www.optimanetworks.be/rma
Please provide as much information about your issue as possible and hold off
on shipping the product until you’ve received authorization from our RMA
department.
is a brand by
Optima Networks bvba
Drabstraat 254B,
2640 Mortsel
Belgium