mooka Hepa Filter Air Purifier User Manual

June 13, 2024
MooKa

mooka Hepa Filter Air Purifier User Manual
Filter Air Purifier

IMPORTANT SAFEGUARDS

WARNING
In order to prevent harm or damage happened to users or others, be sure to comply with the requirement as below:

ATTENTION
It reminds that misusing or mishandling may cause hurt. reminds that misusing or mishandling may cause death.

Warning IconFORBID

The operation cannot be performed or forbidden.

Note IconFORCE
certain operation should be performed (mandatory).

IMPORTANT SAFEGUARDS

WARNING
Please supervise your children and avoid them from touching or using machine.

Wet HandDo not connect or disconnect the power with wet hand
It may cause electrical shocking.

WrenchNo disassembly, repair and reconstruction.
It may cause fire or damage. Please send it to the retailer for repair.

Warning IconDo not use the over run socket or wiring connector. Do use the rated voltage.

Note IconDo plug the power into the socket completely.
It may cause fire because of heating or electrical shocking. Do not use the damaged plug or loose socket.

Avoid WetAvoid any water on the surface of the unit.
It may cause short circuit or electrical shocking,

The appliance must be disconnected from the supply mains before cleaning or other maintenance
Otherwise the unit may start working in a sudden which may

PlugDISCONNECT POWER

cause electrical shocking or hurt.

Do not insert any metal objects into the unit.
It may cause hurt or electric shocking

IMPORTANT SAFEGUARDS

Warning IconDo not repair it when the cord or plug is damaged
It may cause short circuit, electric shocking or fire. Please send it to the retailer for repair.

Note IconIf there is dust on the plug, it may weaken the insulation, even cause fire
Take out the plug and clean it with dry cloth. Please remove the plug from the socket if not using for a long period

**** ATTENTION

Warning IconDo not power the unit on when using insecticide in the room
Otherwise the insecticide may be stored in the unit and will blow out during the normal working time .It is harmful to the health Please ventilate completely after having used the insecticide before turn on the unit

Do not use in the room with lampblack such as kitchen.
It may cause hurt because the machine is not a ventilator

Do not blow in any combustible or fired cigarette into the unit. It may cause fire

Please hold the plug instead of the cord when unplug the power
Otherwise it may cause short circuit, breaking of the cord, electric shocking or fire.

Keep away from alcohol, organic impregnant or insecticide
It may cause cracking short circuit, electric shocking, hurt or fire

Please ventilate timely when used with fire in the room
Otherwise it may cause poisoning of Col as the machine is not a ventilator

Please remove the plug from the socket if any conditions as below:

  • fall switches do not work
  • If the power cord or plug hot singularly
  • If any peculiar smell, exceptional noise or vibration
  • Any other abrormality o failure

If the power cord is damaged, please send it o the retailer or senvice center or technician for repaiting. Do not change or repair it by yourself

PURIFICATION TECHNOLOGIES

The multi-functional filter is composed of pre-filter, HEPA layer and activated carbon layer.

Pre-filter can removes large particles of solid pollutants to ensure the life of the HEPA filter.

HEPA layer can effectively remove PM2.5 particles. Activated carbon layer can effectively remove formaldehyde, benzene, VOCs and other pollutants to keep the air clean.

DIAGRAM OF PURIFICATION
Diagram Of Purification

PRODUCT APPEARANCE DIAGRAM

![Product Appearance

Diagram](https://manuals.plus/wp- content/uploads/2023/09/Screenshot_21-19.png)

PART INTRODUCTION

Product Parts

USE AND OPERATION

PLACEMENT
Please keep the machine air inlet and outlet 30cm or more far away from the wall and home furniture.
Do not use the machine in front of hot source outlet.

REPLACEMENT OF THE FILTERS
Prompt to replace the filter and reset  If the “filter replacement reminder” indicator light is lighted, it means the filters life time (1440hrs) comes to the end, please replace new filters. After replacing new filters, please long press “reset” button for approx.3 seconds, then “filter replacement reminder” indicator light will be switched off, the machine starts to record the filters using time.

TAKE OUT FILTER

  1. Turn it off first, then unplug the power.
  2. Put the machine upside down, hold the machine body firmly with one hand,\ press the cover with the other hand and rotate it counterclockwise.
  3. Take out the used filter.
    Take Out Filters

INSTALL THE FILTER

  1. Remove the protective film of the new filter, and then install the new filter.
  2. Put the machine upside down, hold the machine body firmly with one hand, press the cover with the other hand and rotate it clockwise.
    Install The Filters

EXTERNAL POWER SOURCE

DC POWER
Power supply : 5V ==

interface: Type C

USB cable
USB Cable

INSTRUCTIONS FOR USE

THE POWER SETTING

  • After power on, all the indicator lights will be on for 0.5 seconds for self-test, then enter standby mode. The following pictures are for reference.
  • The first time the unit is turned on, the wind speed button, ON/OFF button, ambient light and light button will be on and the unit will run at low speed. The following pictures are for reference.

Self Check

Standby Mode
Standby Mode
When the product is turned off but not disconnected from the power supply, the device has a memory function. The device will operate in the previous mode when it is turned on again
Turn On
Ambient Light: Tapping the light button to turn on/off the ambient light.

INSTRUCTIONS FOR USE

FAN SPEED SETTING

  • Touch fan speed button to adjust the fan speed

low fan speed
Low Fan Speed
Medium fan speed

High fan speed

After entering sleep mode, all the lights except for the sleep mode indicator will automatically turn off after 10 seconds of no operation. Press any button to deactivate sleep mode.

Press the fan speed button to select sleep mode

No operation within 10 seconds after entering sleep mode

Deactivate sleep mode by pressing any button

INSTRUCTIONS FOR USE

  • Press the “Timer” button to set the working time, 2/4/6/8 hours are available.

Timing 2 hours
Time Setting
Timing 4 hours

Timing & hours

Timing 8 hours
Time Setting

CHILD LOCK
Child lock function can temporarily lock the control panel to avoid accidental touch. Press and hold the “Timer” button for about 3 seconds to turn on/off the child lock. The picture on the right shows the child lock indicator light on.

Child lock was deactivated
Time Setting
Child lock was switched on
Child Clock

EANING AND CARE/FAQ

CLEANING AND CARE
Remove The Plug Please remove plug from the socket before cleaning and maintenance

  • Cleaning the body for this device by damp cloth, then wipe it dry.
  • If machine s too dirty, neutral detergent can be used for cleaning, but please dilute the detergent before use.
  • Do not clean the unit with the solvent listed on the right which may cause distortion or discolor.
  • If the filter replacement indicator light s light up, replace with a new filter.
  • After replacement, press filter replacement button for approx.3 seconds, the filter replacement indicator light will switched off.
    Cleaning Tools

If the machine i not working properly, please kindly check as follows before contacting us for replacement.

Problem Checking Methods Possible Solution
Do Not Work • Please check if the plug is disconnected from the socket Power

plug should be plugged properly
Odor can  not be. removed| Is there a very strong odor in the using environmen (Notes: air should be purified continuously)| It is recommended to ventilate first and then turn on the machine
High noise| Does the using life time for filters come to the end?| Please replace the used filter with a new one
is the PE bag for filter removed?| Please take out filter and tear off PE bag.
Does the using life time for filter come to the end?| Please replace the used filter with a new one.

IMPORTANT

Model No: Mol
Power supply: svI==
Net weight: 0.8KGS
The length of power cable: <1..0m
Rated current: 800mA
Dimensions(WxDxH) 150x150x200(mm)

MULTI-FUNCTION FILTER

Dimensions(WxDxH 130x130x86(mm)
Life time 1440H

CUSTOMER SERVICE
Our customer service team is standing by to assist you if you have any questions or concerns.
www.mookashops.com

support@mookashops.com
1-855-666-9955
 m.me/Mooka OnlineShop

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals