SMS-EN-2208-Q SwitchBot Motion Sensor User Manual
- June 13, 2024
- SwitchBot
Table of Contents
SwitchBot Motion Sensor
User Manual
Please read this user manual carefully before using your device.
Package Contents
List of Components
Preparation
You will need:
- A smartphone or tablet using Bluetooth 4.2 or later.
- The latest version of our app, downloadable via the Apple App Store or Google Play Store.
- A SwitchBot account, you can register via our app or sign in to your account directly if you already have one.
Please note: If you intend to use the Cloud Service feature, you will need a SwitchBot Hub Mini (sold separately).
https://apps.apple.com/cn/app/switchbot/id1087374760https://play.google.com/store/apps/details?id=com.theswitchbot.switchbot&hl=en
Getting Started
- Open the battery cover, insert two AAA batteries following the “+” and “-” signs. Then close the battery cover and press it down until it clicks into place.
- Open the SwitchBot app and sign in.
- Tap “+ “icon at the top right of the home page. Find the Motion Sensor icon and select, then follow the instructions to complete the setup.
Safety Information
- Keep the device away from humid or hot environments.
- Remove the batteries when not used for a long period of time.
- Do not attempt to disassemble, repair, or modify the device.
- Use only the type of batteries specified in this manual.
Detection Range
Light Sensor
Light Sensor senses whether it is bright or dark in the target environment. You can define the threshold for being bright or being dark in the app. Navigate to the Settings page of Motion Sensor in the app for more information.
How to Use
Reset Button Facing Up
It is recommended to install Motion Sensor 1.2 to 2 m (3.9 to 6.6 ft.) above
the ground.
The detection range will be reduced when it is placed lower than 1.2 m (3.9
ft.). There will be detection blind spots when it is placed higher than 2 m
(6.6 ft.).
Reset Button Facing Down (for Pet Owners)
If you are a pet owner, it is recommended to install Motion Sensor 0.1 to 0.2
m (3.9 to 7.9 in.) higher than your pet(s) with the Reset Button facing down,
to prevent false alarms triggered by your pets.
Place Motion Sensor without
the Base
Place Motion Sensor directly on a table or shelf or stick it to a flat surface
using the 3M double-sided adhesive tape. Note: Make sure the lens is
facing towards the desired area to be detected and is placed close to the edge
of the table or shelf.
Place Motion Sensor with the Base
Mount the base to the back or the bottom of Motion Sensor. The base can be
attached to an iron surface or a magnet. You can also stick the base to a flat
surface using the 3M double-sided adhesive tape.
After Motion Sensor is properly installed, tilt it to a desired angle.
Note: Make sure the lens is facing towards the desired area to be detected
and is placed close to the edge of the table or shelf.
Tips for Applying the Adhesive Tape
Make sure the target surface is dry and clean.
Apply pressure to Motion Sensor / the base for 60 seconds after installation.
Keep it away from any heat source such as light bulbs.
Battery Replacement, Firmware Upgrades and Resetting Factory Settings
Battery Replacement
Open the battery cover, remove the old batteries and insert two new AAA
batteries following the” +” and”-” signs. Then close the battery cover and
press it down until it clicks into place
Firmware Upgrades
In order to improve user experience, we will regularly release firmware
updates to introduce new functions and solve any software defects that may
occur during usage. When a new firmware version is available, we will send an
upgrade notification to your account via our app. When upgrading, please make
sure your product has sufficient battery and make sure your smartphone is
within range to prevent interference.
Resetting Factory Settings
Long press the Reset button for 15 seconds or until the LED indicator light is
on.
Note: After the device is reset, all settings will resume to default
values and the logs will be erased.
Troubleshooting
Q: It is not sensitive within the detection range set during high temperature.
A: When the room temperature reaches 36 °C (97 °F), which is very similar to the human body temperature, your Motion Sensor will be less sensitive. Please cool your room by turning on the AC or fan.
Q: There are a lot of false alarms.
A: Adjust the angle of your Motion Sensor to avoid the window area, heat sources, and any areas with constantly moving objects.
Q: How to enable Cloud Services?
A: A SwitchBot Hub Mini (sold separately) is required if you want to use Cloud Services. After setting up a Hub Mini, please navigate to the app homepage. If a cloud icon shows up on the Motion Sensor card, this means it is being scanned by Hub Mini. Tap the Motion Sensor card, tap Settings and enable Cloud Services.
Scan the QR code below to view more solutions.
https://support.switch-bot.com
https://support.switch-bot.com/hc/en-us
Specifications
Model: W1101500
Size: Motion Sensor: 54 x 54 x 30 mm (2.1 x 2.1 x 1.2 in.);
Base: 45 x 45 x 32 mm (1.8 x 1.8 x 1.3 in.)
Weight: Motion Sensor: 56 g (2 02.) (with batteries);
Base: 19 g (0.7 02.)
Battery Life: 2 AAA batteries, roughly 3 years (triggered 120 times by motion,
40 times by light sensing and 20 times by local scenes daily under 25 °C [77
°F])
Operating Temperature: —10 °C to 60 °C (14 °F to 140 °F)
Operating Humidity: 20 % to 85 % RH
Maximum Detection Distance: 9 m (29.5 ft.)
Maximum Detection Range: 110° horizontal and 55° vertical (results obtained
from lab experiments under 25 °C [77 °F])
Warranty
We warrant to the original owner of the product that the product will be free
from defects in materials and workmanship.
Please note that this limited warranty does not cover:
- Products submitted beyond the original limited warranty period.
- Products on which repairs or modifying have been attempted.
- Products subjected to falls, extreme temperatures, water, or other operating conditions outside the product specifications.
- Damage due to natural disaster (including but not limited to lightning, flood, tornado, earthquake, or hurricane, etc.).
- Damage due to misuse, abuse, negligence or casualty (e.g. fire).
- Other damage that is not attributable to defects in the manufacture of product materials.
- Products purchased from unauthorized resellers.
- Consumable parts (including but not limited to batteries).
- Natural wear of the product.
Contact & Support
Setup and Troubleshooting: Support.switch-bot.com
Support Email: support@wondertechlabs.com
Feedback: If you have any concerns or problems when using our products, please
send feedback via our app through the Profile > Feedback page.
CE/UKCA Warning
RF exposure information: The EIRP power of the device at maximal case is
below the exempt condition, 20 mW specified in EN 62479: 2010. RF exposure
assessment has been performed to prove that this unit will not generate the
harmful EM emission above the reference level as specified in EC Council
Recommendation(1999/519/EC).
CE DOC
Hereby, Woan Technology (Shenzhen) Co., Ltd.
declares that the radio equipment type W1101500 is in compliance with
Directive 2014/53/EU. The full text of the EU declaration of conformity is
available at the following internet address: support.switch-
bot.com
UKCA DOC
Hereby, Woan Technology (Shenzhen) Co., Ltd. declares that the radio equipment
type W1101500 is in compliance with UK Radio Equipment Regulations (SI
2017/1206). The full text of the UK declaration of conformity is available at
the following internet address: support.switch-bot.com
This product can be used in EU member states and UK.
Manufacturer: Woan Technology (Shenzhen) Co., Ltd.
Address: Room 1101, Qiancheng Commercial Center, No. 5 Haicheng Road, Mabu
Community, Xixiang Subdistrict, Bao’an District, Snenzhen, Guangdong,
P.R.China, 518100
EU Importer Name: Amazon Services Europe
Importer Address: 38 Avenue John F Kennedy, L-1855
Luxembourg
Wi-Fi: 2412 MHz to 2472 MHz
Operation temperature: —10 °C to 60 °C
FCC Warning
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation, This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment. Such
modifications could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
IC Warning
This device contains license-exempt transmitter(s)/ receiver(s) that comply
with Innovation, Science and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
IC Radiation Exposure Statement
This equipment complies with the IC radiation exposure limits established for
uncontrolled environment. This equipment must be installed and operate at
least 20cm from a radiator or your body.
KCC Warning
Woan Technology(Shenzhen)Co., Ltd.
W1101500
20210 1H
Woan Technology(Shenzhen)Co.,
R-R-Woa-W1101500
NCC Warning
Documents / Resources
|
SwitchBot SMS-EN-2208-Q SwitchBot Motion
Sensor
[pdf] User Manual
SMS-EN-2208-Q SwitchBot Motion Sensor, SMS-EN-2208-Q, SwitchBot Motion Sensor,
Motion Sensor, Sensor
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>