CAT CT1BYR Portable Soft Close 41 in W x 37 in H 10 Drawer Steel Rolling Tool Cabinet Owner’s Manual
- June 13, 2024
- CAT
Table of Contents
OWNER’S MANUAL
Model: CT1BYR
Cabinets
CT1BYR Portable Soft Close 41 in W x 37 in H 10 Drawer Steel Rolling
Tool Cabinet
Warning Locking mechanism used on cabinets is engaged by rotating cam lock
with a key.
Drawers should be fully closed before locking mechanism is engaged.
Side Handle
Install the side handle with included screws.
Casters
a. Includes 2 fixed casters and 2 swivel casters.
| Part | Description | Quantity |
|---|---|---|
| A | Drawer/Work Surface Liner | 11 |
| B | Cabinet Handle | 1 |
| C | Fixed Caster | 2 |
| D | Swivel Caster | 2 |
| E | Lock & Key | 1 |
| F | M6 x 15 Hex Bolt | 4 |
| G | M8 x 25 Hex Bolt | 16 |
| H | Drawer Slide Set | 14 |
© 2023 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, LET’S DO THE WORK, their respective logos, “Caterpillar Corporate Yellow”, the “Power Edge” and Cat “Modern Hex” trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
How to Remove Drawers
Each drawer slide has a black retaining clip. To remove drawer, retaining clips on slides need to be released by pushing lever up (left side of slides) and down (right side of slides) at the same time, and slide the drawer out.
How to Install Drawers
Pull the slide out and then match the track to push in.
Attention:
- When installing the drawer, it is normal for you to feel resistance when pushing in the drawer.
- Please push the drawer all the way in and pull out 2-3 times to check whether the drawer operates smoothly.
a. If the drawer is blocked please remove and re-install.
b. If the drawer moves smoothly, the drawer has been re-engaged correctly.
Lubrication
It is important for the smooth operation of slides to lubricate them
periodically with light grease .
This should be done at least twice a year or more frequently depending on
usage.