Panasonic AT2201 Car Navigation User Manual
- June 4, 2024
- Panasonic
Table of Contents
Car Navigation user’s manual
Model AT2201
Audio Section
Radio Section
Operating Function| Button No. / Name| Performing Specifications
Transition to the radio mode|
(Softkey)
AM ,FM
| (1) Select Audio icon ( ) in short cut menu, push “Source” button at the bottom of screen, then push “Radio”.(2) Select “FM Radio” or “AM Radio” to go to FM/AM mode.(3)To receive radio broadcast, touch frequency in the bottomo of screen.
Reading/writing of the preset memory.|
(Softkey)
Favourite
| In FM/AM mode, by pressing “Heart mark” in top-right of the screen, you can set/remove arbitrary frequency to/from preset memory.
USB Section
Transition to the USB mode| (Softkey)
USB| (1) Select Audio icon ( ) in short cut menu, push “Source” button at the
bottom of screen, then push “USB”. ※Volume name of USB media is shown in
source list.
Playback / Pause|
(softkey)
| If is pressed while playing, this unit pauses.
If is pressed while pausing, this unit stars playing.
iPod Section
Transition to the iPod mode| (Softkey)
iPod| (1) Select Audio icon ( ) in short cut menu, push “Source” button at the
bottom of screen, then push “iPhone”. ※Volume name of iPod/iPhone is shown in
source list.
Playback / Pause|
(softkey)
| If is pressed while playing, this unit pauses.
If is pressed while pausing, this unit stars playing.
Bluetooth Section
Registration method of Bluetooth device
Operation Method| Screen Display Specifications
(1) Touch Gear icon ( ) in short cut menu.
| 
(2) Touch “Bluetooth & devicese” in the menu.
(3) Touch “Manage devices”, then touch “Search devices” in the bottom-right of
the screen. Meantime, set smart phone to waiting BT connection.| 
(4) You can see available devices list in bottom-right of the window, then
select the device that you want to connect.| 
(5) You may see pass code on both H/U and smartphone. Then Approve both.|
(6) BT paring established successfully. You may need to approve on smartphone
to transfer phonebook.| 
*Cold start erase all BT paring.
Handsfree Section
Operating Function| Button No. / Name| Performing Specifications
Transition to the telephone menu screen|
(softkey)
Phone
| (1) Select Phone icon ( ) in the short cut menu.
(2) Select function you want to use from phone menu.
Outgoing| (softkey)
Keypad| Select “Keypad” from phone menu to go to dial screen. Push numeric
button to enter phone number, push ( ) to start phonecall.
Audio Setup Section
Transition to the audio setup adjustment screen| (Softkey)
Sound| (1) Select Setting ( ) from shortcut menu.
(2) Select “Sound & Media” from Settings menu.
(3) Select “Sound tuning” from “Sound & Media”.
Bass/Mid/Treble,| (softkey)
Bass/Mid/Treble| To Adjust Treble/Mid/Bass, drag slider to left (low) or right
(high).
Balance/Fader| (softkey)
Balance/Fader| To Adjust Balance/Fader, drag pointer or press adjust button.
Navigation Section
Location
A vehicle location is displayed by GPS, and a direction is detected with a gyroscope.
Since this device is always used with vehicle, it is not sold to general end users separately. Therefore there is no user manual of this device by alone.
The following statements must be described on the user manual of the vehicle;
[For FCC]
FCC ID : ACJ932AT2201
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
FCC CAUTION:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Radio frequency radiation exposure information:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance of 20cm between the radiator and your body. This transmitter
must not be co-located or operated in conjunction with any other antenna or
transmitter.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
[For ISED]
IC : 216J-AT2201
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the ISED radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body.