BBIM17400BS Built-in oven
User Manual

BBIM17400BS Built-in oven

RECYCLED & RECYCLABLE PAPER

Dear Customer
Please read this manual before using the product.
Beko thank you for choosing the product. We want your product, manufactured with high quality and technology, to offer you the best efficiency. To do this, carefully read this manual and any other documentation provided before using the product and keep it as a reference. If you give the product to someone else, give the manual with it.
Follow the instructions, taking into account all the information and warnings stated in the user manual.
Heed all information and warnings in the user manual. This way, you will protect yourself and your product against the dangers that may occur. Keep the user manual. If you give the product to someone else, give the manual with it. The user manual contains the following symbols:
The hazard that may result in death or injury.
NOTICE Hazard that may result in material damage to the product or its environment.
The hazard that may result in bums is due to contact with hot surfaces.
**** Important information or useful usage tips.
Read the user manual.

Safety instructions

• This section contains safety instructions that will help prevent any risks of personal injuries or material damage.
• If the product is transferred to another person or used secondhand, the operating manual, product labels, other relevant documents, and accessories should be delivered with the product.
• Our company shall not be held responsible for any damage that may occur as a result of failure to comply with these instructions.
• Failure to comply with these instructions shall render any warranty void.
• Always have the installation and repair work performed by the manufacturer, the authorized service, or a person specified by the importer.
• Use genuine spare parts and accessories only.
• Do not attempt to repair or replace any part of the product unless it is clearly specified in the operating manual.
• Do not perform technical modifications on the product.

**Purpose of usage**

• This product is designed for home use. It is not suitable for commercial use.
• Do not use the product in gardens, balconies, or other outdoor environments. The appliance is intended to be used in household and staff kitchen areas in shops, offices, and other working environments.
• WARNING: This product should be used for cooking purposes only. It should not be used for different purposes, such as heating the room.
• The oven can be used to defrost, bake, fry, and grill food.
• This product; should not be used for heating, plate heating, hanging towels, or clothes on the handle for drying.

**Child, vulnerable person, and pet safety**

• This product can be used by children 8 years of age and older, and people who are underdeveloped in physical, sensory, or mental skills, or lack experience and knowledge, as long as they are supervised or trained about the safe use and hazards of the product.

• Children should not play with the product. Cleaning and user maintenance should not be performed by children unless there is someone overseeing them.

• This product should not be used by people with limited physical, sensory, or mental capacity (including children) unless they are kept under supervision or receive the necessary instructions.

• Children should be supervised to ensure that they do not play with the product.

• Electrical products are dangerous for children and pets. Children and pets must not play with, climb on, or enter the product.

• Do not put objects that children may reach on the product.

• WARNING: During use, the accessible surfaces of the product are hot. Keep children away from the product.

• Keep the packaging materials out of the reach of children. There is a hazard of injury and suffocation.

• When the door is open, do not put any heavy objects on it or
  allow children to sit on it. You may cause the oven to tip over or damage the door hinges.

• (Not all products are supplied with a plug, so if your product DOES have a plug) For the safety of children, disconnect the power plug and make the product inoperable before disposing of the product.

**Electrical safety**

• Connect the product into a grounded outlet protected by a fuse that matches the current ratings indicated on the type label. Has the grounding installation been made by a qualified electrician? Do not use the product without grounding in accordance with local/national regulations.
• The plug or the electrical connection of the product should be in an easily accessible place (where it will not be affected by the flame of the stove). If this is not possible, there should be a mechanism (fuse, switch, switch, etc.) on the electrical installation to which the product is connected, in compliance with the electrical regulations and separating all poles from the network.
• The product must not be connected to the outlet during installation, repair, and transportation.
• Connect the product to an outlet that meets the voltage and frequency values specified on the type label.
• (Not all products are supplied with a supply cord, so if your product DOES NOT have a supply cord) Use only the connecting cable specified in the “Technical specifications” section.
• Do not jam the power cord under and behind the product. Do not put a heavy object on the power cord. The power cord should not be bent, crushed, or come into contact with any heat source.
• While the oven is operating, its back surface also gets hot. Power cords must not touch the back surface, connections may be damaged.
• Do not jam the electric cables into the oven door and pass them over hot surfaces. You may cause the oven to short-circuit and catch fire as a result of the cable melting.
• Use original cable only. Do not use cut or damaged cables or extension leads.
• If the power cord is damaged, it must be replaced by a manufacturer, an authorized service or a person to be specified by the importer company in order to prevent possible dangers.
• WARNING: Before replacing the oven lamp, be sure to disconnect the product from the mains supply to avoid the risk of electric shock. Switch off the product or turn off the fuse from the fuse box. (Not all products are supplied with a plug, so if your product DOES have a plug)
• Do not plug the product into an outlet that is loose, has come out of its socket, is broken, dirty, or oily, with risk of water contact (for example, water that may leak from the counter).
• Never touch the plug with wet hands! To unplug, do not hold the cord, always hold the plug.
• Make sure that the product plug is securely plugged into the outlet to avoid arcing.

**Transportation safety**

• Disconnect the product from the mains before transporting the product.
• The product is heavy, carry the product with at least two people.
• Do not use the door and/or handle to transport or move the product.
• Do not put other items on the product and carry the product upright.
• When you need to transport the product, wrap it with bubble wrap packaging material or thick cardboard and tape it tightly. Secure the product tightly with tape to prevent the removable or moving parts of the product and the product from being damaged.
• Check the overall appearance of the product for any damage that may have occurred during transportation.

**Installation safety**

• Before the product is installed, check the product for any damage. If the product is damaged, do not install it.
• Do not install the product near heat sources (radiators, stoves, etc.).
• Keep all ventilation ducts open around the product.
• To prevent overheating, the product should not be installed behind decorative doors.

**Safety of use**

• Make sure that the product is turned off after each use.
• If you do not use the product for a long time, disconnect it or turn off the fuse from the fuse box.
• Do not operate defective or damaged products. If any, disconnect the electricity/gas connections of the product and call the authorized service.
• Do not use the product with the front door glass removed or broken.
• Do not climb on the product to reach anything or for any other reason.
• Do not use the product in situations that may affect your judgment, such as drug intake and/or alcohol use.
• Flammable objects kept in the cooking area may catch fire. Never store flammable objects in the cooking area.
• The oven handle is not a towel dryer. When using the product, do not hang towels, gloves, or similar textiles.
• The hinges of the product door move and tighten when opening and closing the door. When opening/closing the door, do not hold the part with the hinges.

Temperature warnings

• WARNING: While the product is operating, exposed parts will be hot. Do not touch the product and heating elements. Children under the age of 8 should not be brought close to the product without an adult.
• Do not place flammable/explosive materials near the product, as the edges will be hot while it is operating.
• As steam may be exhaled, keep away while opening the oven door. The steam may burn your hand, face, and/or eyes.
• The product may be hot during use. Do not touch the hot compartments, the interior parts of the oven, the heating elements, etc.
• When placing food in the hot oven, removing the food, etc. always use heat-resistant oven gloves.

**Accessory use**

• It is important that the wire grill and tray are placed properly on the wire shelves. For detailed information, refer to the section “Usage of accessories”.
• Accessories can damage the door glass when closing the product door. Always push the accessories to the end of the cooking area.

**Cooking safety**

• Be careful when using alcohol in your food. Alcohol evaporates at high temperatures and may catch fire when exposed to hot surfaces, causing a fire.
• Food waste, oil, etc. in the cooking area may catch fire. Before cooking, remove such coarse dirt.
• Food Poisoning Hazard: Do not keep food in the oven for more than an hour before and after cooking. Otherwise, it may cause food poisoning or diseases.
• Do not heat closed tin cans and glass jars. Built-up pressure may cause the jar to burst.
• Place the greaseproof paper in cookware or on the oven accessory (tray, wire grill, etc.) with food and place it in the preheated oven. Remove any excessive pieces of greaseproof paper hanging from the accessory or container to avoid the risk of touching the oven heating elements. Never use greaseproof paper at an oven temperature higher than the maximum use temperature specified on the greaseproof paper you are using. Never place the greaseproof paper on the oven base.
• Do not place baking trays, plates, or aluminum foil directly on the bottom of the oven. The accumulated heat can damage the base of the oven.
• Close the oven door during grilling. Hot surfaces may cause burns!
• Food not suitable for grilling carries a fire hazard. Grill-only food that is suitable for heavy grill fire. Also, do not place the
  food too far from the back of the grill. This is the hottest area and fatty foods may catch fire.

**Maintenance and cleaning safety**

• Wait for the product to cool before cleaning the product. Hot surfaces may cause burns!
• Never wash the product by spraying or pouring water on it! There is an electric shock hazard!
• Do not clean the product with steam cleaners as this may cause electric shock.
• Do not use harsh abrasive cleaners, metal scrapers, wire wool, or bleach materials to clean the oven front door glass / (if present) oven upper door glass. These materials can cause glass surfaces to be scratched and broken.
• Always keep the control panel clean and dry. A damp and dirty surface may cause problems in operating the functions.

Environmental Instructions

Waste regulation Compliance with the WEEE Directive and Disposing of the Waste Product
This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE).
This product has been manufactured with high-quality parts and materials which can be reused and are suitable for recycling. Do not dispose of the waste product with normal domestic and other wastes at the end of its service life. Take it to the collection center for the recycling of electrical and electronic equipment. Please consult your local authorities to learn about these collection centers.
Appropriate disposal of used appliances helps prevent potential negative consequences for the environment and human health.
Compliance with RoHS Directive:
The product you have purchased complies with the EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive.
Package information

• Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.

Recommendations for energy saving
Information on energy efficiency according to EU 66/2014 can be found on the product fiche given with the product. The following suggestions will help you use your product in an ecological and energy-efficient way:

• Defrost frozen food before cooking.
• In the oven, use dark or enameled containers that transmit heat better.
• Turn off the product 5 to 10 minutes before the end time of cooking for prolonged cooking. Now you can save up to 20% on electricity by using heat.
• If specified in the recipe or user manual, always preheat. Do not open the oven door frequently during cooking.
• Do not open the oven door when cooking in the “Eco fan heating” operating function. If the door is not opened, the internal temperature is optimized to save energy in the “Eco fan heating” operating function, and this temperature may differ from what is shown on the screen.
• Try to cook more than one dish at a time in the oven. You can cook at the same time by placing two cooking containers on the wire shelf. In addition, if you cook your meals one after the other, it will save energy because the oven will not lose its heat.

Your product

Product introduction

1. Control panel
2. Lamp*
3. Wire shelves**
4. Fan motor (behind steel plate)
5. Door
6. Handle
7. Bottom heater (bottom steel plate)
8. Shelf positions
9. Top heater
10. Ventilation holes

• It depends on the model. Your product may not have a lamp, or the type and location of the lamp may differ from the illustration.
  ** It depends on the model. Your product may be without wire shelves. In the illustration, wire shelves are shown as examples.

Product control panel introduction and usage
In this section, you can find the overview and basic uses of the product’s control panel. There may be differences in images and some features depending on the type of product.
Oven control

1. On/Off key
2. Function display
3. Oven control knob
4. Temperature setting key
5. Temperature display
6. Key lock key
7. Cooking start/stop key
8. Alarm key
9. Clock/time display
10. Time and settings key
11. Remote control key

If there is a knob (s) controlling your product, these knob (s) may be recessed in the panel that comes out when pressed in on some models. For settings to be made with these knobs, first push the relevant knob in and pull out the knob. After making your adjustment, press it in again and replace the knob.
Oven control knob
With the oven control knob, you can control the settings in the clock/time display and temperature display. You can navigate between these settings by turning the oven control knob to the right/ left, you can activate and confirm the settings by pressing.
Temperature indicator
You can understand the oven interior temperature from the inner temperature symbol on the display. The symbol appears on the display when the cooking starts and each grades of the inner temperature symbol will be lit as inner temperature reaches to the set temperature.
Function display
The function display contains the operating functions of your oven. Each function is activated by touching it. All functions on the screen are schematic; they may not be available on your product. The operating functions available on your product are explained in the “Oven operating functions” section.

Displays
Keys:

Clock/time display:

• It varies depending on the product model. It may not be available on your product.
  Temperature display:
  

| Cooking symbol
---|---
| Temperature symbol
| Oven inner temperature symbol
| Quick heating (booster) symbol
| Remote control symbol
| Wireless network (wifi) symbol
| Door lock symbol*

• It varies depending on the product model. It may not be available on your product.
  Oven operating functions
  On the function table; the operating functions you can use in your oven and the highest and lowest temperatures that can be set for these functions are shown. The order of the operating modes shown here may differ from the arrangement of your product.

Function symbol| Function description| Temperature range (ºC)| Description and use
---|---|---|---
**| Operating with fan| –| The oven is not heated. Only the fan (on the back wall) operates. Frozen food with granules is slowly defrosted at room temperature, cooked food is cooled. The time required to thaw a whole piece of meat is longer than the food with grains.
| Top and bottom heating| 40 – 280| Food is heated from above and below at the same time. Suitable for cakes and stews in baking molds or cakes and pastries. Cooking is done with a single tray.
| Bottom heating| 40 – 220| Only the lower heating is on. It is suitable for foods that need browning on the bottom.
This function should also be used for easy steam cleaning.
| Fan-assisted bottom/top heating| 40 – 280| The hot air heated by the upper and lower heaters is distributed equally and rapidly throughout the oven with the fan. Cooking is done with a single tray.
| Fan Heating| 40 – 280| The hot air heated by the fan heater is distributed equally and rapidly throughout the oven with the fan. It is suitable for multi-tray cooking of your food at different shelf levels.
| Eco fan heating| 160 – 220| In order to save energy, you can use this function instead of using “Fan Heating” in the range of 160- 220 ° C. But; the cooking time will be slightly longer.
The use of this function is described in the chapter “Operating the oven control unit”.
| | | Description and use**
---|---|---|---
| Pizza function| 40 – 280| The lower heater and fan heating work. It is suitable for cooking pizza.
| “3D” function| 40 – 280| Upper heating, lower heating and fan heating work. All pads of the product are cooked equally and quickly. Cooking is done with a single tray.
| Low grill| 40 – 280| The small grill on the oven ceiling works. It is suitable for grilling smaller amounts.
| Full grill| 40 – 280| The large grill on the oven ceiling works. It is suitable for grilling in large amounts.
| Fan-assisted full grill| 40 – 280| The hot air heated by the large grill is quickly distributed into the oven with the fan. It is suitable for grilling in large amounts.
| Keeping warm| 40 – 100| It is used to keep the food at a temperature ready for service for a long time.
| Bread function| –| It is used for baking bread. The set incoming temperature and time cannot be changed.
| Extra function activation| –| It is used to activate run functions that do not appear on the function display at first startup.

Product Accessories
There are various accessories in your product. In this section, the description of the accessories and the descriptions of correct usage is available. Depending on the product model, the supplied accessory varies. All accessories described in the user guide may not be available in your product.
NOTICE: The trays in your product may be deformed by the effect of the temperature. This has no effect on the function. Deformation disappears when the tray cools down.

| Barrier- coated standard tray
It is used for pastries, frozen foods, and frying large pieces. The barrier- coated oven tray has less adhesion than other trays.
---|---
| Barrier- coated pastry tray
It is used for pastries such as cookies and biscuits. The barrier-coated oven tray has less adhesion than other trays.
Models with wire shelves:
Models without wire shelves:
|

Wire grill It is used for frying or placing the food to be baked, fried, and stewed on the desired shelf.

Use of product accessories

Cooking shelves
There are 5 levels of shelf position in the cooking area. You can also see the order of the shelves in the numbers on the front frame of the oven.
Models with wire shelves
Models without wire shelves

Placing the wire grill on the cooking shelves

Models with wire shelves:
It is crucial to place the wire grill on the wire side shelves properly. While placing the wire grill on the desired shelf, the open section must be on the front. For better cooking, the wire grill must be secured with the stopper on the wire shelf. It must not pass over the stopper to contact the rear wall of the oven.

Models without wire shelves:
It is crucial to place the wire grill on the side shelves properly. The wire grill has one direction when placing it on the shelf. While placing the wire grill on the desired shelf, the open section must be on the front.

Placing the tray on the cooking shelves

Models with wire shelves:
It is also crucial to place the trays on the wire side shelves properly.
While placing the tray on the desired shelf, its side designed for holding must be on the front.
For better cooking, the tray must be secured with the stopper on the wire shelf.
It must not pass over the stopper to contact the rear wall of the oven.

Models without wire shelves:
It is also crucial to place the trays on the side shelves properly. The tray has one direction when placing it on the shelf.
While placing the tray on the desired shelf, its side designed for holding must be on the front.

Stopper function of the wire grill
There is a stopper function to prevent the wire grill from tipping out of the wire shelf. With this function, you can easily and safely take out your food. While removing the wire grill, you can pull it forward until it reaches the stopper. You must pass over the stopper to remove it completely.

Stopper function of the wire grill tray – Models with wire shelves
There is also a stopper function to prevent the tray from tipping out of the wire shelf. While removing the tray, release it from the rear lock and pull it
towards yourself until it reaches the stopper. You must pass over the stopper to remove it completely.

Proper placement of the wire grill and tray on the telescopic rails-Models with wire shelves and telescopic rails
Thanks to telescopic rails, trays or the wire grill can be easily installed and removed. When using trays and wire grills with the telescopic rail, care should be taken that the pins, on the front and back of the telescopic rails, rest against the edges of the grill and the tray (shown in the figure).

Technical specifications

General specifications

Product external dimensions (height/width/depth)| 595 mm/594 mm/567 mm
Oven installation dimensions (height/width/depth)| 590 or 600 mm/560 mm/min. 550 mm
Voltage/frequency| 220-240 V – 50 Hz
Cable type and cross-section used/suitable for use in the product| min. HO5W- FG 3 x 1,5 mm²
Total power consumption| 3,3 kW
Oven type| Multifunction oven

Basics: Information on the energy label of electrical ovens is given in

accordance with the EN 60350-1 / IEC 60350-1 standard. Those values are determined under standard load with bottom-top heater or fan-assisted heating (if any) functions.
Energy efficiency class is determined in accordance with the following prioritization depending on whether the relevant functions exist on the product or not: 1-Eco fan heating, 2-Fan Heating 3- Fan assisted low grill, 4-Top and bottom heating.
Technical specifications may be changed without prior notice to improve the quality of the product.
Figures in this manual are schematic and may not exactly match your product.
Values stated on the product labels or in the documentation accompanying them are obtained in laboratory conditions in accordance with relevant standards. Depending on the operational and environmental conditions of the product, these values may vary.

First use

Before you start using your product, it is recommended to do the following in the following sections.
First time setting
Always set the time of day before 1 using your oven. If you do not set it, you cannot cook in some oven models.

1. When the oven is in standby mode (when the time of day is displayed on the display), activate the settings menu by touching the key for about 3 seconds.
   » The 3- 2- 1 count down is displayed. When the countdown expires, the settings menu is activated.

2. Press the oven control knob or touch the key once to activate the hour field.
   » Hour field and symbol flashes on the time/clock display.

3. Set the hour by rotating the oven control knob to right/left and_press the oven control knob or touch keys once to activate the minute field.
   » Minute field and symbol flashes on the time/clock display.

4. Set the minute by rotating the oven control knob to right/left. Confirm the time setting by pressing on the oven control knob or touching the key.
   » The time of day is set and the symbol appears on the time/clock display always on.
   If the initial time is not set, the clock will run starting from the time set in production. You can change the time of day setting later, as described in the “Settings” section.
   Time of the day settings is canceled in case of long-term power failure. It needs to be re-adjusted.

First cleaning

1. Remove all packaging materials.
2. Remove all accessories from the oven provided within the product.
3. Turn the product on for 30 minutes and then, turn it off. This way, residues and layers that may have remained in the oven during production are burned and cleaned.
4. When operating the product, select the highest temperature and the operating function that all the heaters in your product operate. See “Oven operating functions”. You can learn how to operate the oven in the following section.
5. Wait for the oven to cool.
6. Wipe the surfaces of the product with a wet cloth or sponge and dry with a cloth.

Before using the accessories;
Clean the accessories you remove from the oven with detergent water and a soft cleaning sponge.
NOTICE The surface might get damaged by some detergents or cleaning materials. Do not use aggressive detergents, cleaning powders/creams, or any sharp objects during cleaning.
NOTICE Smoke and smell may emit for a couple of hours during the initial operation. This is quite normal. Ensure that the room is well ventilated to remove the smoke and smell. Avoid directly inhaling the smoke and the smell that emits.

How to operate the oven

General information on oven usage
Cooling fan (It may not exist on your product.)
Your product has a cooling fan. The cooling fan is activated automatically when necessary and cools both the front of the product and the furniture. It is automatically deactivated when the cooling process is finished. Hot air comes out over the oven door. Do not cover these ventilation openings with anything. Otherwise, the oven may overheat.
The cooling fan continues to operate during oven operation or after the oven is turned off (approximately 20-30 minutes). If you cook by programming the oven timer, at the end of the cooking time, the cooling fan turns off with all functions. The cooling fan running time cannot be determined by the user. It turns on and off automatically. This is not an error.
Oven lighting
The oven lamp is turned on when the oven starts cooking. In some models, the lamp is on during cooking, while in some models it turns off after a certain time.
If the product door is opened while the oven is operating or in the closed position, the oven lamp turns on automatically.
Operation of the oven control unit

General warnings for the oven control unit
The maximum time that can be set for the end of the time is 5:59 hours. In warn keeping function, this time is 23:59 hours. In the event of a power failure, the cooking and cooking time set will be canceled.
While making any adjustments, the relevant symbols flash on the display. A short time should wait for the settings to be saved.
If cooking time is set when %. cooking starts, and the remaining time is displayed on the display.
If the quick preheat (booster) WO setting is enabled on your control unit, the symbol appears on the display when you start cooking and the oven reaches the temperature you set for cooking quickly. For the quick preheat (booster) setting, please see the “Settings” section.

1. On/Off key
2. Function display
3. Oven control knob
4. Temperature setting key
5. Temperature display
6. Key lock key
7. Cooking start/stop key
8. Alarm key
9. Clock/time display
10. Time and settings key
11. Remote control key

Displays
Keys:

Clock/time display:

• It varies depending on the product model. It may not be available on your product.

Turning on the oven

1. Turn on the oven by touching the key.
   » After the oven is turned on, the first operating function is displayed on the display. On this display, the operating function, temperature, cooking time, and alarm can be set.
   If no settings are made on this display, the oven will turn off in about 5 minutes and the time of day will appear on the display.

Turning off the oven
Turn off the oven by touching the key. The time of day appears on the display.
Manual cooking to select temperature and oven operating function
You can cook by making a manual control (at your own control) without setting the cooking time by selecting the temperature and operating function specific to your food. The “Top and bottom heating” function and 180 °C settings are shown as an example in the images.

1. Turn on the oven by touching the key.

2. Touch on the operating function you want to cook on the function display.

3. Touch on the operating function you want to cook on the function display. If the function you want to select is not among the first operating functions that appear on the function display, you can activate the lower row of operating functions by touching on “Extra function activation”.

4. The predefined temperature for the operating function you selected appears on the temperature display. To change this temperature, press the oven control knob or touch the key and rotate the oven control knob to right/left.
   » The °C symbol blinks on the temperature display.   If you change the operating MEW function after changing the predefined temperature for the operating functions, the temperature you set last appears on the display. However, if the set temperature is not within the temperature range of the selected operating function, the highest adjustable temperature of that operating function appears.

5. Confirm the set temperature by touching the key.
   » The symbol appears on the temperature display.

6. After setting the operating function and temperature, touch the key to start cooking. » Your oven will start operating at the selected operating function and, temperature immediately. The and symbols will appear on the temperature display. The cooking time starts to count on the display. Each stage of the symbol lights up as the oven interior temperature reaches the set temperature. The oven does not turn off automatically since manual cooking is done without setting the cooking time. You have to control cooking and turn it off. When your cooking is complete, touch the key to end cooking or touch the key to turn off the oven completely.

Cooking by setting the cooking time;
You can have the oven turn off automatically at the end of the time by selecting the temperature and operating function specific to your food and setting the cooking time on the control unit. The “Top and bottom heating” function, 180 °C, and 45-minute settings are shown as an example in the images.

1. Turn on the oven by touching the key.

2. Touch on the operating function you want to cook on the function display.

3. Touch on the operating function you want to cook on the function display. If the function you want to select is not among the first operating functions that appear on the function display, you can activate the lower row of operating functions by touching on “Extra function activation”.

4. The predefined temperature for the operating function you selected appears on the temperature display. To change this temperature, press the oven control knob or touch the key and rotate the oven control knob to right/left.
   » The symbol blinks on the temperature display. If you change the operating function after changing the predefined temperature for the operating functions, the temperature you set last appears on the display. However, if the set temperature is not within the temperature range of the selected operating function, the highest adjustable temperature of that operating function appears.

5. Confirm the set temperature by touching the key.
   » The symbol appears on the temperature display.

6. Press the oven control knob or touch the key once for setting the cooking time.
   » The symbol blinks on the display and the 30-minute set cooking time appears on the clock/time display. After setting the operation function and temperature, the cooking time will be set for 30 minutes by touching the key or by pressing on the oven control knob directly for a quick setting of the cooking time and changing the time by rotating the oven control knob to right/left.

7. Set the cooking time by rotating the oven control knob. Confirm the cooking time by touching the key.   The cooking time increases by 1 minute in the first 15 minutes, and after 15 minutes it increases by 5 minutes.

8. After setting the operating function, temperature, and cooking time, touch the HI key to start cooking. » Your oven will start operating immediately at the selected function and temperature. The set cooking time starts to count down. The and ► symbols will appear on the temperature display. Each stage of the  symbol lights up as the oven interior temperature reaches the set temperature. After the set cooking time is completed, “End” appears on the temperature display, the timer gives an audio warning, and cooking stops.

9. The audio warning sounds for one minute. If the key is touched while the audio warning sounds and “End” appears on the temperature display, the oven continues to operate indefinitely. If the key is touched, the oven turns off. If any key other than these keys is touched, the audible warning will be interrupted.

Eco fan cooking
In order to save energy, you can use this function instead of using “Fan Heating” in the range of 160-220 °C. But; the cooking time will be slightly longer.

1. Turn on the oven by touching the key.
2. Touch and keep the “Fan Heating” on the function display. » The 3- 2- 1 count down is displayed. When the countdown expires, symbols appear and the “Eco fan cooking” is activated.
3. You can change the set temperature and set cooking time as described in previous sections. Then you start the cooking.
   » In “Eco fan cooking”, the lamp light is shorter than the other cooking function during cooking due to energy savings.

Bread function
Your oven has a “Bread function” specially defined for bread making. The temperature and time settings of the function are fixed.
Ingredients

• 500 g flour
• 15 g sugar
• 10 g instant yeast
• 10 g sunflower oil
• 8 g salt
• 300 ml water (35°C)

For the top of the dough

• 2 teaspoon sunflower oil

Preparation

1. Sift flour into a deep bowl. Add sugar to the flour and mix it homogeneously.
2. Open the middle of the flour and add the yeast, salt, and sunflower oil. Starting from the sides of the bowl, pour the warm water gradually.
3. Knead the dough by hand or in a dough mixer for about 10-15 minutes.
4. Turn the kneaded dough by hand a few times and put it in a bowl. Apply 1 teaspoon of sunflower oil to the dough and cover it with stretch film so that it touches the dough.
5. Cover the dough with stretch film, cover it with a thick cloth and leave it to rise at room temperature.
6. Take your dough, which has been fermented for 60 minutes, on the counter and fold it 4-5 times and remove the air inside. Apply 1 teaspoon of sunflower oil to the dough and cover it with stretch film so that it touches the dough. Ferment the dough at room temperature for another 30 minutes.
7. When the dough has finished fermenting, shape the dough into salmon and place it on a baking tray. Make 3-4 scratches on your dough with the help of a knife.
8. Place the tray on shelf 3 of your oven.
9. Turn on the oven by touching the key.
10. Activate the lower row of run functions by touching “Extra function activation” on the function display.
11. Touch the “Bread function” on the lower row of the function display.
12. Touch the key to start cooking.
13. At the end of the cooking time, the audible warning sounds for one minute. If the key is touched, the oven turns off. If any key other than these keys is touched, the audible warning will stop.

Settings
The 3- 2- 1 countdown is displayed on the menus or settings that shall be activated by touching for a long period. When the countdown expires, the relevant menu or setting is activated.
Activating key lock
By using the key lock feature, you can safeguard the control unit from interference.

1. Touch the key until the symbol appears on the time/clock display. » The 3- 2- 1 count down is displayed. When the countdown expires, the symbol appears on the time/clock display and the key lock is activated. When any key is touched or the oven control knob pressed when the key lock is set, the timer sounds an audible signal, and the symbol flashes.   The key lock will not be canceled MS in case of power failure.

Deactivating the key lock

1. Touch the key until the 8 symbol appears on the time/clock display.
   » The 3- 2- 1 count down is displayed. When the countdown expires, the symbol disappears and the key lock is disabled on the time/clock display.

Setting the alarm
You can also use the control unit of the product for any warning or reminder other than cooking.
The alarm has no effect on the oven operating functions. Used for warning purposes. For example, you can use the alarm when you want to turn the food in the oven at a certain time. As soon as the time you set has expired, the control unit gives you an audible warning.
  Maximum alarm time can be 23 VS hours and 59 minutes.

1. Touch the key once to set the alarm time.
   » The symbol and minute field start to flash on the time/clock display.

2. Set the minute by rotating the oven control knob to right/left and touch key once to activate the hour field.

3. Set the hour by rotating the oven control knob to right/left. Confirm the time setting by pressing on the oven control knob or touching key.
   » The symbol appears continuously and the alarm time starts to count down on the time/clock display.

4. After the alarm time has expired, the symbol starts flashing and gives you an audible warning.
   If the alarm time and cooking time MO are set at the same time, the shorter time is displayed on the time/clock display.

Turning off the alarm

1. At the end of the alarm period, the warning sounds for one minute. Touch any key to stop the audible warning.
   » The audible warning is stopped.

If you want to cancel the alarm;

1. Touch the keys once to cancel alarm time.
   » The symbol starts to flash on the time/clock display.

2. Set the alarm time to “00:00” by rotating the oven control knob to right/left.

Setting the volume
You may set the volume of the control unit. Your oven shall be off to perform this operation.

1. While your oven is turned off (when the time of day is displayed on the display), activate the settings menu by touching the key for about 3 seconds.
   » The 3- 2- 1 count down is displayed. When the countdown expires, the settings menu is activated.

2. Rotate the oven control knob to right/left until the “b-1” or “b-2” appears on the time/clock display.

3. Activate the volume setting by touching the key or pressing the oven control knob.
   » The symbol starts to flash on the time/clock display.

4. Set the desired volume level by rotating the oven control knob to right/left.

5. Confirm the selected volume level by touching the key or pressing the oven control knob.

Setting the screen brightness
You may set the brightness of the control unit display. Your oven shall be off to perform this operation.

1. While your oven is turned off (when the time of day is displayed on the display), activate the settings menu by touching the key for about 3 seconds.
   » The 3- 2- 1 countdown is displayed. When the countdown expires, the settings menu is activated.

2. Rotate the oven control knob to right/left until the “d-1”, “d-2” or “d-3” appears on the time/clock display.

3. Activate the brightness setting by touching the key or pressing the oven control knob.
   » The symbol starts to flash on the time/clock display.

4. Set the desired brightness level by rotating the oven control knob to right/left.

5. Confirm the selected brightness level by touching the key or pressing the oven control knob.

Setting the Quick preheating (Booster) function
You may operate the cooking automatically with the quick preheating function on your product. For this purpose, you shall activate the quick pre- heating setting. Your oven shall be off to perform this operation.

1. While your oven is turned off (when the time of day is displayed on the display), activate the settings menu by touching the key for about 3 seconds.
   » The 3- 2- 1 count down is displayed. When the countdown expires, the settings menu is activated.

2. Rotate the oven control knob to right/left until the symbol “OFF” appears on the time/clock display.

3. Activate the quick pre-heating (booster) setting by touching the key or pressing the oven control knob.
   » The symbol starts to flash on the time/clock display.

4. Rotate the oven control knob to the right/left to change the “OFF” setting displayed on the time/clock display to the “ON” setting.

5. Confirm the quick pre-heating (booster) setting by touching the key or pressing the oven control knob.
   You may turn off the quick pre-heating setting with the same procedure. By bringing it to the “OFF” setting, you may cancel the quick pre-heating setting.

Changing the time of day
To change the time of day that you have previously set,

1. When the oven is in standby mode (when the time of day is displayed on the display), activate the settings menu by touching the key for about 3 seconds.
   » The 3- 2- 1 count down is displayed. When the countdown expires, the settings menu is activated.

2. Press the oven control knob or touch key once to activate the hour field.
   » Hour field and symbol flashes on the time/clock display.

3. Set the hour by rotating the oven control knob to right/left and…press the oven control knob or touch key once to activate the minute field.
   » Minute field and symbol flashes on the time/clock display.

4. Set the minute by rotating the oven control knob to right/left. Confirm the time setting by pressing on the oven control knob or touching key.
   » The time of day is set and the symbol appears on the time/clock display always on.

Connecting the oven to the wireless network and introducing it to the HomeWhiz application
You may connect your oven to the wireless network and control it through the “HomeWhiz” application with a smart device. For this purpose, install
the Homewhiz app on your smart device first. “HomeWhiz” application is available on IOS and Android mobile operating systems.
After downloading the “HomeWhiz” application, follow the instructions on the application to create your home.
You may complete the procedure MO to connect your oven to a wireless network and activate the remote control of the oven by following the instructions provided on the application.

1. To bring the oven to the setup mode, while your oven is turned off (when the time of day is displayed on the display), touch the and ft keys simultaneously for about 3 seconds. » When the oven switches to the setup mode, an animation is displayed on the display where some lines flash.

2. Open the “HomeWhiz” app you have installed on your smart device. After creating your home, select the oven under kitchen appliances and enter the stock number of your product into the application and follow the steps described in the application.
   The stock number of your appliance is the number starting with “77…” located under the front cover of the manual.

3. Complete the introduction of your oven to the application by following the instructions provided on the application.

Activating the remote control of the oven
After introducing your oven to the “HomeVVhiz” application, to allow remote control:

1. Touch the key once while the symbol is displayed on the display
   » The rt symbol shall be displayed on the display together with the symbol.
   If the symbol is not displayed, touch the  key until the symbol is displayed on the display. If you have not introduced your appliance to the HomeWhiz application, the symbol flashes once and an error signal is heard.
     If the symbol is displayed on We’re the display, but an error signal is heard when the key is pressed, and if the symbol is not displayed or symbol flashes on the display, check the internet connection of your appliance. If the internet connection is OK and the problem persists, repeat the steps for installation.

Deleting the matching of an oven connected to the “Homewhiz” application
After adding your product to the “Homewhiz” application, the user account you used for “Homewhiz” matches the information of your product. In order to delete a match due to loss of access to the account you use in the application or for other reasons, the following actions should be taken.

1. With the product turned off (while the time of day appears on the display), touch the and keys for approximately 5 seconds.
   » A countdown from 5 appears on the display.

2. After the countdown is complete, a delete match animation will appear on the display.

3. After the match deleting process is completed without any problem, an audible sound will be heard and your oven will restart.
   If there is a problem in deleting a match and the process cannot be completed, an error sound will be heard.

4. After the deletion is completed, you can connect the product to your “Homewhiz” account again.

Declaration of Conformity
Angelika A.S. hereby declares that this appliance complies with Directive 2014/53/EU. A detailed RED Declaration of Conformity can be found online at support.beko.com among the additional documents on the product page for your appliance.

2.4 GHz band: 100 mW max.

General Information about cooking

This section describes tips on preparing and cooking your food.
In addition, you can also find some of the foods tested as producers and the most appropriate settings for these foods. Appropriate oven settings and accessories for these foods are also indicated.
General warnings about cooking in the oven

• While opening the oven door during or after cooking, hot-burning steam may emerge. The steam may burn your hand, face, and/or eyes. When opening the oven door, stay away.
• Intense steam generated during cooking may form condensed water drops on the interior and exterior of the oven and on the upper parts of the furniture due to the temperature difference. This is a normal and physical occurrence.
• The cooking temperature and time values given for foods may vary depending on the recipe and amount. For this reason, these values are given as ranges.
• Always remove unused accessories from the oven before you start cooking. Accessories that will remain in the oven may prevent your food from being cooked at the correct values.
• For foods that you will cook according to your own recipe, you can reference similar foods given on the cooking tables.
• Using the supplied accessories ensures you get the best cooking performance. Always observe the warnings and information provided by the manufacturer for the external cookware you will use.
• Cut the greaseproof paper you will use in your cooking in suitable sizes to the container you will cook. Greaseproof papers that are overflowing from: the container can create a risk of burns and affect the quality of your cooking. Use the greaseproof paper you will use in the temperature range specified.
• For good cooking performance, place your food on the recommended correct shelf. Do not change the shelf position during cooking.

Pastries and oven food General Information

• We recommend using the accessories of the product for good cooking performance. If you are going to use external cookware, prefer dark, non-sticking, and heat-resistant ware.
• If preheating is recommended on the cooking table, be sure to put your food in the oven after preheating.
• If you are going to cook using cookware on the wire grill, place it in the middle of the wire grill, not near the back wall.
• All materials used in making pastry should be fresh and at room temperature.
• The cooking status of the products may vary depending on the amount of food and the size of the cookware.
• Metal, ceramic, and glass molds extend the cooking time and the bottom surface of pastry foods does not brown evenly.
• If you use cooking paper during cooking, a little browning may be observed on the bottom surface of the food. In this case, you may need to extend your cooking time by about 10 minutes.
• The values specified in the cooking tables are determined as a result of the tests carried out in our laboratories Values suitable for you may differ from these values.
• Place your food on the appropriate shelf recommended on the cooking table. Refer to the bottom shelf of the oven as shelf 1.

Tips for baking cakes

• If the cake is too dry, increase the temperature by 10 ° C and shorten the baking time.
• If the cake is moist, use a small amount of liquid or reduce the temperature by 10 ° C.
• If the top of the cake is burnt, put it on the lower shelf, lower the temperature and increase the baking time.
• If it is cooked well inside but the outside is sticky, use a smaller amount of liquid, reduce the temperature and increase the cooking time.

Tips for cooking pastries

• If the pastry is too dry, increase the temperature by 10 ° C and shorten the cooking time. Wet the dough sheets with a sauce consisting of milk, oil, egg, and yogurt mixture.
• If the pastry is getting cooked slowly, make sure that the thickness of the pastry you have prepared does not overflow the tray.
• If the pastry is browned on the surface but the bottom is not cooked, make sure that the amount of sauce you will use for the pastry is not too much at the bottom of the pastry. For even browning, try to spread the sauce evenly between the dough sheets and the pastry.
• Bake your pastry in the position and temperature appropriate to the cooking table. If the bottom is still not browned enough, place it on a bottom shelf for the next cooking.

Cooking table for pastries and oven food
Suggestions for cooking with a single tray

Food| Accessory to be used| Operating function| Shelf position| Temperature (ºC)| Cooking time (min) (approx)
---|---|---|---|---|---
Cakes in tray| Standard tray*| Top and bottom heating| 3| 180| 30 … 40
Cakesld in mold| Cake mold on wire grill| Fan Heating| 2| 180| 30 … 40
Small cakes| Standard tray| Top and bottom heating| 3| 160| 25 … 35
| Standard tray| Fan Heating| 3| 150| 25 … 35
Sponge| Round cake mold, 26 cm in diameter with clamp on wire grill| Top and bottom heating| 2| 150| 30 … 40
cake| Round cake mold, 26 cm in diameter with clamp on wire grill*| Fan Heating| 2| 150| 35 … 45
Cookie| Pastry tray| Top and bottom heating| 3| 170| 25 … 35
| Pastry tray| Fan Heating| 3| 170| 20 … 30
Dough pastry| Standard tray| Fan-assisted bottom/top heating| 2| 180| 35 … 45
Rich pastry| Standard tray| Top and bottom heating| 2| 200| 20 … 30
| Standard tray| Fan Heating| 3| 180| 20 … 30
Whole bread| Standard tray| Top and bottom heating| 3| 200| 30 … 40
| Standard tray| Fan Heating| 3| 200| 30 … 40
Lasagna| Glass/metal rectangular mold on wire grill”| Top and bottom heating| 2 or 3| 200| 30 … 40
| Round black metal mold, 20 cm in diameter on wire grill”| Top and bottom heating| 2| 180| 50 … 65
Apple pie| Round black metal mold, 20 cm in diameter on wire grill”| Fan Heating| 3| 170| 50 … 65
Pizza| Standard tray| Top and bottom heating| 3| 280| 5 … 9
Standard tray| Pizza function| 2| 280| 5 … 10

Preheating is recommended for all food.

• These accessories may not be included in your product.
  ** These accessories are not included in your product. They are commercially available accessories. Suggestions for cooking with two trays

Food| Accessory to be used| Operating function| Shelf position| Temperature (ºC)| Cooking time (min) (approx)
---|---|---|---|---|---
Small cakes| 2 -Standard tray
4 -Pastry tray| Fan Heating| 2 – 4| 150| 25 … 35
Cookie| 2 -Standard tray
4 -Pastry tray| Fan Heating| 2 – 4| 170| 25 … 35
Dough pastry| 1 -Standard tray
4 -Pastry tray| Fan Heating| 1 – 4| 180| 40…50
Rich pastry| 2 -Standard tray
4 -Pastry tray| Fan Heating| 2 – 4| 180| 20 … 30

Preheating is recommended for all food.

• These accessories may not be included with your product
  ** These accessories are not included in your product. They are commercially available accessories.

Cooking table for Eco fan heating – operating function

• Do not change the cooking temperature after cooking starts in Eco fan heating -operating function.
• Do not open the door during cooking in the Eco fan heating – operating function. If the door is not opened, the inner temperature is optimized to save energy and may differ from the display.
• Do not preheat in Eco fan heating mode.

Suggestions for cooking with a single tray

Food| Accessory to be used| Shelf position| Temperature (ºC)| Cooking time (min) (approx)
---|---|---|---|---
Small cakes| Standard tray| | 160| 25 … 35
Cookie| Standard tray | 3| 180| 25 … 35
Doug pastry| Standard tray| 3| 200| 45 … 55
Rich pastry| Standard tray| 3| 200| 35 … 45

Meat, Fish, and Poultry
The key points on roasting

• Seasoning it with lemon juice and pepper before cooking all chicken, turkey and large pieces of meat will increase cooking performance.
• It takes 15 to 30 minutes more to cook boned meat than fillet by roasting.
• You should calculate about 4 to 5 minutes of cooking time per centimeter of the meat thickness.
• After the cooking time is over, leave the meat in the oven for about 10 minutes. The juice of the meat is better distributed to the fried meat and does not come out when the meat is cut.
• Fish should be placed on a medium or low-level shelf on a heat-resistant plate.
• Cook the foods recommended on the cooking table with a single tray.

Cooking table for meat, fish, and poultry

Food| Accessory to be used| Operating function| Shelf position| Temperature (ºC)| Cooking time (min)(approx)
---|---|---|---|---|---
Steak (whole)/Roast
(1 kg)| Standard tray’| Fan-assisted bottom/top
heating| | 15 mins. 250/max, then  180 … 190| 60 … 80
Lamb’s shank
(1.5 – 2.0 kg)| Standard tray| Fan-assisted bottom/top
heating| 3| 170|  85 … 110
Roasted| Wire grill”
Place one tray on a lower shelf| Fan-assisted bottom/top
heating| 2| 15 mins. 250/max, then  190| 60 … 80
chicken (
kg)| Wire grill
Place one tray on a lower shelf| “3D ” function| CV| 15 mins. 250/max, then 190| 60 … 80
Turkey (5.5 kg)| Standard tray| Fan-assisted bottom/top
heating| 1| 25 mins. 250/max, then  180 … 190| 150 … 210
Standard tray| “3D ” function| | 25 mins. 250/max, then 180 … 190| 150 … 210
Fish| Wire grill
Place one tray on a lower shelf| Fan-assisted bottom/top
heating| 3| 200| 20 … 30
Wire grill
Place one tray on a lower shelf| “3D “function| | 200| 20 … 30

Preheating is recommended for all food.

• These accessories may not be included in your product.
  These accessories are not included in your product. They are commercially available accessories.
  Grill
  Red meat, fish, and poultry meat will quickly turn brown when grilled, hold a beautiful crust, and do not dry out. Fillet meats, skewer meats, sausages as well as juicy vegetables (tomatoes, onions, etc.) are particularly suitable for grilling.
  General warnings**

  • Food not suitable for grilling carries a fire hazard. Grill-only food that is suitable for heavy grill fire. Also, do not place the food too far from the back of the grill. This is the hottest area and fatty foods may catch fire.
  • Close the oven door during grilling. Never grill with the oven door open. Hot surfaces may cause bums!

The key points of the grill

• Prepare foods of similar thickness and weight as much as possible for the grill.
• Place the pieces to be grilled on the wire grill or wire grill tray by distributing them without exceeding the dimensions of the heater.
• Depending on the thickness of the pieces to be grilled, the cooking times given on the table may vary.
• Slide the wire grill or the wire grill tray to the desired level in the oven. If you are cooking on the wire grill, slide the oven tray to the lower shelf to collect the oils. The oven tray you are going to slide should be sized to cover the entire grill area. This tray may not be included with the product. Put some water into the oven tray for easy cleaning.

Grilling table

Food| Accessory to be used| Shelf position| Temperature (ºC)| Cooking time (min)(approx)
---|---|---|---|---
Fish| Wire grill| 4 – 5| 250| 20 … 25
Chicken pieces| Wire grill| 4 – 5| 250| 25 … 35
Meatball (beef) – 12 pieces| Wire grill| 4| 250| 20 … 30
Lambchop| Wire grill| 4 – 5| 250| 20 … 25
Steak – (sliced)| Wire grill| 4 – 5| 250| 25 … 30
Veal chop| Wire grill| 4 – 5| 250| 25 … 30
Vegetable gratin| Wire grill| 4 – 5| 220| 20 … 30
Toast bread| Wire grill| 4| 250| 1 … 3

It is recommended to preheat for 5 minutes for all grilled food. Turn pieces of food after 1/2 of the total grilling time.
Test foods

• Foods on this cooking table are prepared according to the EN 60350-1 standard to facilitate testing of the product for control institutes.

Cooking table for test foods
Suggestions for cooking with a single tray

Food| Accessory to be used| Operating function| Shelf position| Temperature (ºC)| Cooking time (min)(approx)
---|---|---|---|---|---
Shortbread (sweet cookie)| Standard tray| Top and bottom heating| 3| 140| 20 … 30
| Standard tray| Fan Heating| 3| 140| 15 … 25
Small cakes| Standard tray| Top and bottom heating| 3| 160| 25 … 35
| Standard tray| Fan Heating| 3| 150| 25 … 35
| Round cake mold, 26 cm in diameter with clamp on the wire grill*”| Top and bottom heating| 2| 150| 30 … 40
Sponge cake| Round cake mold, 26 cm in diameter with clamp on the wire grill| Fan Heating| 2| 150| 35 … 45
| Round black metal mold, 20 cm in diameter on wire grill| Top and bottom
heating| 2| 180| 50 … 65
Apple pie| Round black metal mold, 20 cm in diameter on wire grill**| Fan Heating| 3| 170| 50 … 65

Preheating is recommended for all food.

• These accessories may not be included in your product.
  These accessories are not included in your product. They are commercially available accessories
  Suggestions for cooking with two trays**

Food| Accessory to be used| Operating function| Shelf position| Temperature (ºC)| Cooking time (min)(approx)
---|---|---|---|---|---
Shortbread (sweet cookie)| 2 -Standard tray
4 -Pastry tray| Fan Heating| 2 – 4| 140| 15 … 25
Small cakes| 2 -Standard tray
4 -Pastry tray| Fan Heating| 2 – 4| 150| 25 … 35

Preheating is recommended for all food.

• These accessories may not be included in your product.
  These accessories are not included in your product. They are commercially available accessories.
  Grill**

Food| Accessory to be used| Shelf position| Temperature (ºC)| Cooking time (min)(approx)
---|---|---|---|---
Toast bread| Wire grill| 4| 250| 1…3
Meatball (beef) – 12
pieces| Wire grill| 1| 250| 20…30

Turn the food after 1/2 of the total grilling time.
It is recommended to preheat for 5 minutes for all grilled food.

Maintenance and care

General cleaning information
General warnings

• Wait for the product to cool before cleaning the product. Hot surfaces may cause burns!
• Do not apply the detergents directly on the hot surfaces. This may cause a permanent stain.
• The appliance shall be thoroughly cleaned and dried after each operation. Thus, food residues shall be easily cleaned and these residues shall be prevented from burning when the appliance is used again later. Thus, the service life of the appliance extends and frequently faced problems are decreased.
• Do not use steam cleaning products for cleaning.
• Some detergents or cleaning agents may damage the surface. Do not use abrasive detergents, cleaning powders, cleaning creams, descalers, or sharp objects during cleaning.
• There is no need for a special cleaning agent for cleaning after each use. Clean the appliance using dish soap, warm water, and a soft cloth or sponge, and dry with a dry microfiber cloth.
• Be sure to completely wipe off any remaining liquid after cleaning and immediately clean any food splashing around during cooking.
• Do not wash any component of your appliance in a dishwasher.

Inox and stainless surfaces

• Do not use acid or chlorine-containing cleaning agents to clean stainless or inox surfaces and handles.
• Stainless or inox surfaces may change color in time. This is normal. After each operation, clean with a detergent suitable for the stainless or inox surface.
• Clean with a soft soapy cloth and liquid (non-scratching) detergent suitable for inox surfaces, taking care to wipe in one direction.
• Remove lime, oil, starch, milk, and protein stains on the inox-stainless and glass surfaces immediately without waiting. Stains may rust for long periods of time.

Enameled surfaces

• After each use, clean the enamel surfaces using dishwashing detergent, warm water, and a soft cloth or sponge, and dry them with a dry cloth.
• If your product has an easy steam cleaning function, you can make easy steam cleaning for light non-permanent dirt. (See the “Easy steam cleaning” section)
• For persistent stains, the oven and grill cleaner recommended on the website of your product brand, and a non-scratching scouring pad can be used. Do not use an external oven cleaner.
• The oven must cool down for cleaning in the cooking area. Cleaning on hot surfaces shall create both fire hazards and damage to the enamel surface.

Catalytic surfaces

• The side walls in the cooking area can only be covered with enamel or catalytic walls. It varies by model.
• The catalytic walls have a light matte and porous surface. The catalytic walls of the oven should not be cleaned.
• Catalytic surfaces absorb oil thanks to their porous structure and start to shine when the surface is saturated with oil, in this case, it is recommended to replace the parts.

Glass surfaces

• When cleaning glass surfaces, do not use hard metal scrapers and abrasive cleaning materials. They can damage the glass surface.
• Clean the appliance using dishwashing detergent, warm water, and a microfiber cloth specific for glass surfaces, and dry it with a dry microfiber cloth.
• If there is residual detergent after cleaning, wipe it with cold water and dry it with a clean and dry microfiber cloth. Residual detergent residue may damage the glass surface next time.
• Under no circumstances should the dried-up residue on the glass surface be cleaned off with serrated knives, wire wool, or similar scratching tools.
• You can remove the calcium stains (yellow stains) on the glass surface with the commercially available descaling agent, a descaling agent such as vinegar or lemon juice.
• If the surface is heavily soiled, apply the cleaning agent to the stain with a sponge and wait a long time for it to work properly. Then clean the glass surface with a wet cloth. • Discolorations and stains on the glass surface are normal and not defects.

Plastic parts and painted surfaces

• Clean plastic parts and painted surfaces using dishwashing detergent, warm water, and a soft cloth or sponge and dry them with a dry cloth.
• Do not use hard metal scrapers and abrasive cleaners. It may damage the surfaces.
• Ensure that the joints of the components of the appliance are not left as damp and with detergent.
  Otherwise, corrosion may occur on these joints.

Cleaning the accessories
Unless otherwise stated in the user manual, do not wash the product accessories in the dishwasher.
Cleaning the barrier-coated accessories

• Before using the barrier-coated oven tray for the first time, do the following once; insert the barrier-coated tray into the oven and turn on the oven at 200°C for 40 minutes.
• Do not use abrasive cleaning agents to clean the barrier-coated accessories. Preferably use cream surface cleaners with a soft cloth or sponge.
• After hard baking conditions (such as functions with grill, grill+fan), soak the barrier-coated accessories in lukewarm water for 10 minutes. Then clean with a soft cloth or a sponge.

Cleaning the control panel

• When cleaning the panels with knob control, wipe the panel and knobss with a damp soft cloth and dry with a dry cloth. Do not remove the knobs and gaskets underneath to clean the control panel. The control panel and knobs may be damaged.
• While cleaning the inox panels with knob control, do not use inox cleaning agents around the knobs. The indicators around the knobs may be deleted.
• Clean the touch control panels with a damp soft cloth and dry with a dry cloth. If your product has a key lock feature, set the key lock before performing control panel cleaning. Otherwise, incorrect detection may occur on the keys.

Cleaning the inside of the oven (cooking area)
Follow the cleaning steps described in the “General cleaning information” section according to the surface types in your oven.
Cleaning the side walls of the oven
The side walls in the cooking area can only be covered with enamel or catalytic walls. It varies by model. If there is a catalytic wall, refer to the “Catalytic walls” section for information. If your product is a side rack model, remove the side racks before cleaning your side walls. Then complete the cleaning as described in the “General cleaning information” section according to the side wall surface type.
To remove the side racks:

1. Remove the front of the side rack by pulling it on the side wall in the opposite direction.

2. Pull the side rack towards you to remove it completely.
   

3. To reattach the shelves, the procedures applied when removing them must be repeated from the end to the beginning, respectively.

Easy Steam Cleaning
It varies depending on the product model. It may not be available on your product. It ensures easy cleaning because the dirt (having waited not for too long) is softened with the steam that forms inside the oven and the water drops condensing on the inner surfaces of the oven.

1. Remove all accessories inside the oven.

2. Pour 500 ml of water into the oven tray and place the tray at the 2nd rack of the oven.
   

3. Set the oven to “Bottom heating” mode and run at 100°C for 20 minutes. Open the door and wipe the inner surfaces of the oven with a damp sponge or cloth.

Open the door immediately and wipe the inner surfaces of the oven with a damp sponge or cloth.
When opening the door, steam will escape. This can create a risk of burning. Be careful when opening the oven door. Use warm water with washing liquid, a soft cloth, or a sponge to clean the persistent dirt and wipe it with a dry cloth.
During the easy steam cleaning es. mode, water that is in the pool at the base of the oven to soften lightly formed residues/dirt within the oven cavity will evaporate and condense in the oven cavity and inner glass of the oven door, therefore water may drip when the oven door is opened. Wipe away the condensation as soon as the oven door is opened.
It varies depending on the product model. It may not be available on your product. After condensation in the oven, there might be water or moisture in the pool channel under the oven. After use, clean this pool channel with a damp cloth and then dry it.
Cleaning the oven door
Do not use harsh abrasive MO cleaners, metal scrapers, wire wool or bleach materials to clean the oven door and glass. You can remove your oven door and door glasses to clean them. How to remove the doors and windows is explained in the sections “Removing the oven door” and “Removing the inner glasses of the door”. After removing the door’s inner glasses, clean them using a dishwashing detergent, warm water, and a soft cloth or sponge, and dry them with a dry cloth. Wipe the glass with vinegar and then rinse it against lime residues that may occur on the oven glass.
Removing the oven door

1. 0pen the oven door.
2. Open the clips in the front door hinge socket on the right and left by pressing downwards as shown in the figure.

The hinge type (A), (B), and (C) varies according to the product model. The figures below show how to open all hinge types.
(A) type hinge is available in normal door types.
(B) type hinge is available in soft closing door types.
(C) type hinge is available in soft opening/closing door types.
4. PulI the removed door upwards to release it from the right and left hinges and remove it.
To reattaches the door, the procedures applied when removing it must be repeated from the end to the beginning, respectively. When installing the door, be sure to close the clips on the hinge socket.
Removing the inner glass of the oven door
Inner glass of the product’s front door of may be removed for cleaning.

1. Open the oven door.
   

2. Pull the plastic component, attached to the upper section of the front door, towards yourself by simultaneously pressing on the pressure points on both sides of the component and removing it.
   

3. As shown in the figure, gently lift the innermost glass (1) towards ‘A’ and then, remove it by pulling towards ‘B’.
   1 Innermost glass panel
   2` Inner glass panel (It may not exist on your product.)

4. 11 your product has an inner glass (2), repeat the same process to detach it (2).

5. The first step of regrouping the door is to reassemble the inner glass (2). Place the beveled edge of the glass to meet the beveled edge of the plastic slot. (If your product has an inner glass). Inner glass (2) must be attached to the plastic slot closest to the innermost glass (1).

6. While reassembling the innermost glass (1), pay attention to placing the printed side of the glass on the inner glass. It is crucial to place the lower corners of the innermost glass (1) to meet the lower plastic slots.

7. Push the plastic component towards the frame until a “click” sound is heard.

Cleaning the oven lamp
In the event that the glass door of the oven lamp in the cooking area becomes dirty: clean using dishwashing detergent, warm water, and a soft cloth or sponge and dry with a dry cloth. In case of oven lamp failure, you can replace the oven lamp by following the sections that follow.
Replacing the oven lamp
General warnings

• To avoid the risk of electric shock before replacing the oven lamp, disconnect the electrical connector and wait for the oven to cod. Hot surfaces may cause bums!
• In this oven, an incandescent lamp with a power of less than 40 W, a height of less than 60 mm, a diameter of less than 30 mm or a halogen lamp with socket type G9, a power of less than 60 W is used. The lamps are suitable for operation at temperatures above 300 °C. Oven lamps can be obtained from Authorised Service Agents or technicians with licenses.
• The position of the lamp may differ from that shown in the figure.
• The lamp used in this product is not suitable for use in the lighting of home rooms. The purpose of this lamp is to help the user see food products.
• The lamps used in this product must withstand extreme physical conditions such as temperatures above 50 ° C.

If your oven has a round lamp,

1. Disconnect the product from the electricity.

2. Remove the glass cover by turning it counterclockwise.
   

3. If your oven lamp is type (A) shown in the figure below, rotate the oven lamp as shown in the figure and replace it with a new one. If type (B) is a model, pull it out as shown in the figure and replace it with a new one.
   

4. Refit the glass cover.

If your oven has a square lamp,

1. Disconnect the product from the electricity.

2. Remove the wire shelves according to the description.
   

3. Lift the lamp’s protective glass cover with a screwdriver.

4. If your oven lamp is type (A) shown in the figure below, rotate the oven lamp as shown in the figure and replace it with a new one.
   If type (B) is a model, pull it out as shown in the figure and replace it with a new one.
   

5. Refit the glass cover and wire shelves.

Troubleshooting

Consult the Authorised Service Agent or technician with ‘cense or the dealer where you have purchased the product if you cannot remedy the trouble although you have implemented the instructions in this section. Never attempt to repair a defective .roduct rself.
The oven emits steam when it is in use. it

• It is normal that steam esca Dunn >>> This

Water drops occur during cooking.

• The vapor that arises during cooking can condense and form water droplets when it hits the cold surfaces of the Product. >>> This is not a fault.

The product emits metal noises while heating and cooling.

• When the metal parts are heated, they may expand and cause noise. >>> This is not a fault.

The product does not operate.

• The main kiss is defective or has tripped. >>> Check fuses in the 111S49 box. If necessary, replace or reset them.
• The product is not plugged into the (grounded) socket. >>> Check the plug connection.
• Buttonsrimobs/keys on the control panel do not function. >>> If your product ui with key lock function, may be enabled. Reese disables it.

The oven light does not work.

• The oven lamp is defective. >>> Replace oven lamp.
• Power is cut. >» Check if there is power. Check the fuses in the fuse box. If necessary reset the fuses.

The oven does not heat.

• Might not be set to a certain cooking function and/or temperature. >>> Set the oven to a certain cooking function and/or temperature.
• In models equipped with a timer, the timer is not adjusted. >>> Adjust the time.
• Power is cut. >>> Check if there is power. Check the fuses in the fuse box. If necessary or reset the fuses.

(In models with timer) The clock display is blinking or the clock symbol is o n.

• A previous power outage has occurred. >>> Adjust the time / Switch off the product and switch it on again.

BBIM17400BS

385.4419.22/R.AA/28.042022 7768282943

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>