COAST 22-910v01B HX4 Clip Light Instructions
- June 13, 2024
- COAST
Table of Contents
COAST 22-910v01B HX4 Clip Light
Product Information
The HX4 is a versatile clip light equipped with a fixed beam system that offers white and red utility beam light modes. It features a 180-degree beam rotation for adjustable beam position. The light is powered by two AAA alkaline batteries (included) and has a power button with a smart cycle switch. The HX4 also has magnets and a universal clip for convenient attachment.
White & Red LED Light Operation
To activate the white mode, press the power button on the body of the light. Pressing the same button a second time will activate the red mode. A third press will turn off the light completely.
Beam Position Adjustment
To adjust the beam position, firmly grip the body of the light with one hand and rotate the cylinder grip to the desired position with the other hand.
Battery Installation
To install the batteries, firmly grip and rotate the circular battery compartment knob counterclockwise to remove the battery compartment end cap. Once removed, place two AAA batteries into the light in the direction indicated under the end cap. Replace the end cap and turn the battery compartment knob clockwise to tighten it until fully sealed.
Maintenance
To clean the external body, wipe it with a cloth moistened with water or isopropyl alcohol. Do not submerge the light in water.
Warranty
For expedited warranty service, discounts, and exclusive access to other COAST products, visit coastportland.com.
INSTRUCTIONS
WHITE & RED LED LIGHT OPERATION
The HX4 is equipped with a FIXED BEAM SYSTEM that has white and red UTILITY BEAM light modes. To activate the white mode, press the power button on the body of the light. Pressing the same button a second time will active the red mode. A third and final press will turn off the light completely.
BEAM POSITION ADJUSTMENT
The HX4 is able to rotate on a 180 degree angle. To adjust the beam position, firmly grip the body of the light with one hand and rotate the cylinder grip to a desired position with a second hand.
BATTERY INSTALLATION
Firmly grip and rotate the circular battery compartment knob counterclockwise to remove the battery compartment end cap. Once the end cap is completely removed, place two AAA batteries into the light in the direction indicated under the end cap. Replace the end cap and turn the battery compartment knob clockwise to tighten it until it is fully sealed.
MAINTENANCE
Wipe the external body with a cloth moistened with water or isopropyl alcohol. Do not submerge.
DESCRIPTION
WARRANTY
For expedited warranty service, as well as discounts and exclusive access to other COAST products, visit: coastportland.com.
JOIN THE COAST CREW:
- Expedited warranty service
- Earn points towards discounts off your next purchase
- Exclusive access to promotions and new product releases GO TO COASTPORTLAND.COM/JOIN TO SIGN UP
References
- COAST: Innovative LED Flashlights and Hands Free Lighting Solutions – COAST Products
- Create Account – COAST Products