Pyle PDWM1904 8-Channel Wireless Microphone System User Manual

Pyle PDWM1904 8-Channel Wireless Microphone System

SYSTEM TYPE

• The Vocal Artist-UHF is a hand-held system designed for singers who desire the high quality microphones and the freedom of wireless performance.
• The Presenter-UHF is a body-pack system designed for public speakers who prefer an inconspicuous, hands-free lavaliere microphone.
• The Headset-UHF is a body-pack system designed for users in physically active applications, who desire the freedom of hand-free microphone.

CHANNEL RECEIVER

SINGLE CHANNEL RECEIVER

1. Power Button: Power ON/OFF the receiver.
2. Power Indicator: Indicate the power ON/OFF.
3. Channel Display: Indicates the frequency data of the selected channel group.
4. SET Function Button: Sets channel data.
5. “AF”Audio Level Indicator: Indicate the wireless system audio signal level.
6. “RF” signal indicator: it glows when the Receiver receive RF signal from Transmitter.
7. Antenna.
8. Volume Knob: Adjust the volume output of receiver.
9. XLR Balanced Output Jack: Connect the audio cable from this jack to the input port of amplifier, mixer.
10. 1/4″ Audio Output Jack: Connect the audio cable from this jack to the input port of amplifier, mixer.
11. Power Jack: Connect the AC/DC adapter to receiver.

DUAL CHANNEL RECEIVER

1. Power Button: Power ON/OFF the receiver.
2. Power Indicator: Indicate the power ON/OFF.
3. Channel Display: Indicates the frequency data of the selected channel group.
4. SET Function Button: Sets channel data.
5. “AF”Audio Level Indicator: Indicate the wireless system audio signal level.
6. “RF” signal indicator: it glows when the Receiver receive RF signal from Transmitter.
7. Antenna.
8. Volume Knob: Adjust the volume output of receiver.
9. XLR Balanced Output Jack: Connect the audio cable from this jack to the input port of amplifier, mixer.
10. 1/4″ Audio Output Jack: Connect the audio cable from this jack to the input port of amplifier, mixer.
11. Power Jack: Connect the AC/DC adapter to receiver.

MICROPHONE FUNCTIONS

1. Grille: Protects the cartridge and help reducing the breath sounds and wind noise.
2. Channel Display: Indicates the frequency data of the selected channel group.
3. Down Function Button: Sets channel data.
4. Up Function Button: Sets channel data.
5. Power and Audio Mute Switch.
6. Battery Cover: Open it to install the battery.

TRANSMITTER FUNCTIONS

• Power and Audio Mute Switch.
• Antenna: Transmit the RF signal of transmitter.
• Belt Clip: Attach the transmitter to the belt.
• Audio Input Jack: it is suitable for lavalier system/headset system.
• Channel Display: Indicates the frequency data of the selected channel group.
• Gain Adjusting Volume: Adjust the transmitter audio input gain.
• State Setting Switch: Set the using state of lavalier system(L)/headset system(H).
• Up Function Button: Sets channel data.
• Down Function Button: Sets channel data.

RECEIVER CONNECTIONS

• Receiver Power Connection: Connect the AC adapter into the DC power connector on the back of the receiver. Plug the AC adapter into a AC 120V/220V 50Hz outlet.
• Antenna: Keep the position of antenna at a 45 angle from vertical, .(Shown as below)
• Audio Connection: Connect the audio cable from the audio output on the receiver to the input on your amplifier equipment.

BODYPACK TRANSMITTER CONNECTION

• Lavalier Microphone Connection: Connect the connector of supplied Lavalier microphone to the connecting jack of transmitter (Shown as below) Set the transmitter work state in wireless lavaliere system.
• Headset Microphone Connection: Connect the connector of supplied Headset microphone to the connecting jack of transmitter(Shown as below) Set the transmitter work state in wireless headset system.

TRANSMITTER BATTERY INSTALLATION

• Battery Installation of Transmitter: Push open the battery cover, Insert the supplied batteries into battery jar in polarity and cover the battery Cover.

MATCHINGWIRELESS FREQUENCY (RECEIVER /TRANSMITTER CONNECTION)

• Press and hold the “SET” button on the receiver — then release the button once the receiver display begins to flash.
• When itis flashing, continue to press the “SET” button again to select the desired channel, the selected channel will save automatically without any action for 5 seconds.
• Power on your microphone/transmitter, press and hold the “UP” and “ DOWN” arrow keys once the CH number on display begins to flash.
• When it is flashing, press “UP” and “DOWN” arrow keys to select the same channel as chosen on receiver, then, the selected channel will save automatically without any action for5 seconds.
• Repeat steps 1-4 to connect an additional microphone / transmitter (For models PDWM3375, PDWM3400)

TROUBLESHOOTING

No Sound

|

Rod transmitter indicator is not flashing

| Slide transmitter POWER ON/ OFF switch ON position. Make sure battery Is Inserted properly, observing battery (+/-), If battery is inserted properly, replace with fresh battery.
Rod transmitter indicator is flashing| Slide transmitter MUTE/ON switch ON position.

Red receiver POWER light off

| Make sure AC adapter is securely plugged into a electrical outlet and into DC input connector.

Make sure AC electrical outlet works and supplies proper volt-

age.

Receiver signal indicators A/B lights glowing

| Turn up receiver volume control. Confirm that the output connec- tions from the receiver to the external equipment are secure.
Receiver signal indicators A/B lights off. Transmitter and receiv- er POWER lights glowing.| Confirm transmitter’s and receiv- er’s frequencies matches.

Move transmitter closer to the

receiver.

Sound level differs from level of cabled instrument

|

Receiver signal indicators A/B lights glowing

| Adjust transmitter gain level to compensatory.

Adjust receiver volume as neces-

sary.

Sound level differs with different guitars.| Receiver signal indicators A/B lights glowing.| Re-adjust transmitter gain level to compensate for differences in guitar outputs.
Distortion level increases grad- ually| Receiver signal indicators A/B lights and transmitter’s low bat- tery light glowing|

Replace transmitter battery

Bursts of noise or other audible radio signals present

|

Signal indicators A/B lights on

| Identify potential sources of interference (other RF sources) and turn off, remove or use a wireless system operating on a different frequency.

Momentary loss of sound as transmitter is moved around performing area

|

Receiver signal indicators A/B lights off when sound is lost.

| Reposition receiver and perform walk-through test again. If audio dropouts persist, mark “dead“ spots and avoid them during performance

UHF WIRELESS MICROPHONE SYSTEM FEATURES AND SPECIFICATIONS

PDWM1902 System

Features

• UHF Microphone Signal Transmission
• Simple Setup & Hassle-Free Operation
• Operation Range: Up to 160’+ ft.
• LED Display for Channel Display & Power Indicator
• Selectable Frequency: (8) Available Audio Channels
• Audio Level Indicator: Displays Wireless Signal Strength
• RF Signal Indicator: Displays Transmitter Signal Strength
• Adjustable Rotary Volume Control
• 1/4″ Audio Output Jack
• XLR Balanced Output Jack

Handheld Microphone Specs

• Includes (1) Wireless Dynamic Mic
• LCD Display with Channel Readout
• RF Output: >10 dBm
• Modulation Type: FM
• Max Deviation: ±40 KHz
• Spurious Emission: >55 dBc
• Nominal Current Drain: < 40mA
• Battery Operated, Requires: (2) x ‘AA’ Batteries
• Dimensions: 9.25 x 1.9 x 1.9 in

Receiver Specs

• Image & Spurious Rejection: >70 dB
• Signal / Noise Ratio: -105dB
• T.H.D.: < 1%
• Audio Output Level: 0-300 mV
• Power Supply: 110/220V (12-15V Power Adapter)
• Dimensions: 6.8 x 5.3 x 1.7 in
• Sold as: Kit
• Weight: 2.62 lbs.

PDWM1904

System Features

• UHF Band Microphone System
• Simple Setup & Hassle-Free Operation
• Operation Range: Up to 160’+ ft.
• LED Display Screens for Audio Channel & Power Indicator
• Audio Level Indicator: Displays Wireless Audio Signal Strength
• RF Signal Indicator: Display Transmitter Signal Strength
• Adjustable Rotary Volume Control
• 1/4” Audio Output Jack
• XLR Balanced Output Jack

What’s in the Box

• Microphone Receiver
• (1) Body-Pack Transmitter
• (1) Headset Mic
• (1) Lavalier Mic

Body-Pack Transmitter Specs

• RF Output: >10 dBm
• Modulation Type: FM
• Max Deviation: ± 40 KHz
• Spurious Emission: > 55 dBc
• Nominal Current Drain: < 40mA
• Power Requirements: 2 x 1.5V AA

Receiver Specs

• Signal / Noise Ratio: -105dB
• Border Upon Channel Rejection: > 70 dB
• T.H.D.: < 1%
• Audio Output Level: 0-300 mV
• Power Supply: 110/220V (12-15V Power Adapter)
• Dimensions 6.8 x 5.3 x 1.7 in
• Sold as: Kit
• Weight: 2.5 lbs.

PDWM3375

System Features

• UHF Band Microphone System
• Simple Setup & Hassle-Free Operation
• Operation Range: Up to 160’+ ft.
• LED Screen Displays Audio Channel & Power Indicator
• Audio level indicator for wireless signal
• RF Signal Indicator for transmitter signal strength
• Independent & adjustable channel volume controls
• Selectable Frequency Range: Up to (8) Channels
• 1/4″ Audio Output Jack
• XLR Balanced Output Jack

Receiver Specs

• Signal / Noise Ratio: -105dB
• Border Upon Channel Rejection: >70dB
• T.H.D.: < 1%
• Audio Output Level: 0-300 mV
• Dimensions 6.8 x 5.3 x 1.7 in

Handheld Mic Specs

• Includes (2) Wireless Dynamic Microphones
• RF Output: >10 dBm
• Modulation Type: FM
• Max Deviation: ± 40 KHz
• Spurious Emission: > 55 dBc
• Nominal Current Drain: < 40mA
• Battery Powered, Requires (2) x ‘AA’ Batteries -Each
• Dimensions: 9.25 x 1.9 x 1.9 in
• Power Supply: 110/220V (12-15V Power Adapter)
• Sold as: Kit
• Weight: 3.12 lbs.

PDWM3378

System Features

• UHF Band Microphone System
• Operation Range: Up to 160’+ ft.
• LED Digital Display Readout Screens
• Simple Setup & Hassle-Free Operation
• AF & RF Audio Transmission Signal Strength Indicators
• Independent & Adjustable Channel Volume Controls
• Selectable Frequency Range: Up to (8) Channels
• 1/4″ Audio Output Jack
• XLR Balanced Output Jack

What’s in the Box

• Receiver Base
• Belt pack Transmitter
• Hand held Microphone
• Headset Microphone
• Lavalier Microphone
• Power Cable

Transmitter Specs

• RF Output: >10 dBm
• Modulation Type: FM
• Max Deviation: ± 40 KHz
• Spurious Emission: > 55 dBc
• Nominal Current Drain: < 40mA
• Battery Powered, Requires (2) x ‘AA’ Batteries -Each

Receiver Specs

• Signal / Noise Ratio: -105dB
• Border Upon Channel Rejection: >70dB
• T.H.D.: < 1%
• Audio Output Level: 0-300 mV
• Dimensions 6.8 x 5.3 x 1.7 in
• Power Supply: 110/220V (12-15V Power Adapter)
• Sold as: 1
• Weight: 0 lbs.

PDWM3400

System Features

• UHF Band Microphone Signal System
• Operation Range: Up to 160’+ ft.
• Audio Level Indicator for Wireless Signal Strength
• Independent & Adjustable Channel Volume Controls
• RF Signal Indicator for Transmitter Signal Strength
• LED Power Indicator & Channel Display
• Selectable Frequency Range: Up to (8) Channels
• 1/4” Audio Output Jack
• XLR Balanced Output Jack

What’s in the Box

• Microphone Receiver
• (2) Body-Pack Transmitters
• (2) Headset Microphones
• (2) Lavalier Microphones

Body-Pack Transmitter Specs

• RF Output: >10dBm
• Modulation Type: FM
• Max Deviation: ±40KHz
• Spurious Emission: >55dBc
• Nominal Current Drain: <40mA
• Power Requirements: (2) x 1.5V AA (Not Included)
• Dimensions: 9.25” x 1.9” x 1.9”

Receiver Specs

• Image & Spurious Rejection: >70 dB
• Signal / Noise Ratio: -105dB
• T.H.D.: < 1%
• Audio Output Level: 0-300 mV
• Power Supply: 110/220V (12-15V, DC Adapter)
• Dimensions: 6.8” x 5.3” x 1.7”
• Sold as: Kit
• Weight: 2.94 lbs.

PyleUSA.com

FREQUENTLY ASKED QUESTIONS

What is the Pyle PDWM1904 8-Channel Wireless Microphone System?

The Pyle PDWM1904 is a wireless microphone system that allows you to connect and use up to 8 wireless microphones simultaneously.

What is included in the Pyle PDWM1904 package?

The package typically includes the main receiver unit and a set of wireless microphones, along with necessary accessories like power adapters and cables.

What type of wireless technology does the PDWM1904 use?

The PDWM1904 uses UHF (Ultra High Frequency) wireless technology to provide reliable and interference-resistant microphone connections.

What is the range of the wireless signal on the PDWM1904?

The wireless range can vary, but it's generally around 100 to 165 feet, depending on factors like obstacles and interference.

Can I use multiple microphones simultaneously with the PDWM1904?

Yes, the PDWM1904 is designed to support up to 8 microphones at the same time, making it suitable for group performances or presentations.

What type of microphones are included with the PDWM1904?

The specific microphones included can vary, but they are typically handheld dynamic microphones with built-in wireless transmitters.

Is the PDWM1904 suitable for live performances and events?

Yes, the system's capability to handle multiple microphones makes it suitable for live performances, karaoke nights, public speaking events, and more.

What are the frequency response and audio quality of the PDWM1904 system?

The frequency response and audio quality are generally decent, providing clear and intelligible sound for various applications.

Can I adjust the individual microphone volume levels?

Yes, the PDWM1904 usually features individual volume controls for each microphone channel, allowing you to balance the audio levels.

Is the PDWM1904 system easy to set up?

The setup process is typically straightforward. You'll need to connect the main receiver unit to your audio system and pair the wireless microphones.

What types of events can benefit from the PDWM1904 system?

Events such as weddings, conferences, seminars, church services, and musical performances can benefit from the convenience of multiple wireless microphones.

Does the PDWM1904 system offer any anti-interference features?

UHF technology inherently offers better resistance to interference, which helps maintain a stable wireless connection.

Are there any potential drawbacks to using the PDWM1904?

Like any wireless system, it might be susceptible to interference in certain environments, and the effective range could be affected by obstacles.

Can I use the PDWM1904 for recording purposes?

While the PDWM1904 is primarily designed for live sound reinforcement, you could potentially use it for recording if the audio quality meets your requirements.

Can I expand the PDWM1904 system with additional microphones?

The PDWM1904 is typically sold as a complete system, but you might be able to find compatible microphones from the same manufacturer to expand it.

DOWNLOAD THE PDF LINK:Pyle PDWM1904 8-Channel Wireless Microphone System User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>