NEWKBO Low Voltage Projection Laser Light Instruction Manual

NEWKBO

Low Voltage Projection Laser Light

Instruction Manual

These instructions are for your safety. Please read through them thoroughly before use and retain for future reference.

Before You Start

• Decide on an appropriate location for your product (see Installation instructions below).
• If you have any doubt about installing this product, consult a qualified electrician.

Installation instructions :

1. The laser projector is suitable for OUTDOOR USE.
2. The AC adaptor MUST be installed INDOORS away from weather.
3. Install the garden spike, small ring with the laser projector.
4. Keep this product away from naked flames such as candles.
5. Always position cables and extension leads so that they will not be a hazard to the elderly, pets and children.
6. Ensure the unit is positioned so that you have enough cable to reach an indoor mains power socket.

Timed to perfection

It comes with a timer function; when in the “ON” mode, the projector will stay on for six hours and then automatically shut off. This will repeat every 24 hours, therefore after 18 hours, the projector will come on again for six hours and the cycle will continue.

Assembly diagram:

IMPORTANT SAFETY INSTRUCTION

WARNING: Stobe/flashing lights, under some conditions may induce epilepsy in flicker-sensitive individuals. If operating at a function, ensure signage is erected.

• The laser projector is suitable for OUTDOOR USE.

• The AC adaptor MUST be installed INDOORS away from weather.

• Working temperature is 0-32ºC.

• The supplied adaptor is suitable for operation of laser LED Modules only.

• Only operate this projector with the supplied adaptor, Model No.JT-DC5V6W-R

• Do not turn on and off the unit frequently.
  CAUTION! Do not look directly into the laser as this may cause damage to your eyes.

• Do not connect this light set to the power supply while it is in the packaging or when storing.

• DO NOT attempt to replace the non-replaceable laser LED in this laser projector.

• Never allow any part of the set to come into contact with a source of heat or flame.

• Care must be taken to avoid damage the cable or fittings.

• If any part of the product or cable is damaged, the laser projector MUST be discarded.

• Not to be used by children as a toy. Keep out of reach of children. This is not a toy.

• Do not position the laser projector where it will be exposed to extreme wet weather or submerged in water.

• Make sure the mains power socket is powered OFF before plugging in or unplugging the unit.

• Always switch OFF this product or unplug the AC adaptor if unattended.

• DO NOT overload mains power socket.

• DO NOT pierce the cable when securing in place, as this will damage the wiring.

• Please refer to the packing or product rating label for product class, specifications and rating.

Caution: do not allow anyone to stare into the projection lens.
This projector must be operated by an adult only. Take extra care when switching the unit on and off to avoid accidental exposure of eye to the laser beam. Keep the projector out of reach of children. Supervision of children required when the projector is working.

Laser LED Bulbs

This laser projector is constructed with non-replaceable laser LED. DO NOT attempt to dismantle the product or replace the laser LED. DO NOT move the projector when switched ON.

Technical Data

• Wavelength: 530 / 630nm
• Max. Output : <1mW
• Keycode: 42782193

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>