ANKER A3305 PowerConf S500 Speakerphone User Manual

ANKER A3305 PowerConf S500 Speakerphone User Manual

At a Glance

1.  Volume down button 6 Play button
2.  Mute button 7 Link button
3.  Phone call button 8 Bluetooth button
4.  Volume up button 9 USB-C charging port
5.  Power button

Charging

• Fully dry off the USB-C charging port before charging.
• Fully charge the speakerphone before the first use to extend the lifespan.
•  Use a certified USB-C charging cable and charger to prevent any damage

Powering On / Off

Press and hold the power button for three seconds to power on or off

• The PowerConf speakerphone will automatically power on once connected to your PC by using the USB-C cable.
• The PowerConf speakerphone will automatically power off after 30 minutes in thecase of no signal input or output.
• To check the battery level, press the power button again when powered on.

Connecting

There are 3 ways that you can connect the PowerConf speakerphone to your devices.
Option A: Connect to PC (Bluetooth Dongle)

1. Plug the provided Bluetooth dongle into a USB port on your PC. PowerConf S500 will be ready to use when it is powered on.

2. You might need to manually set PowerConf S500 as the audio device for your PCsystem or conference software.

• macOSSystem Preferences > Sound > Sound Effects / Output / Input
• WindowsRight-click on the sound icon > Open Sound settings > Choose your output device / Choose yourinput device
• Software (Zoom, Skype or more)Settings > Audio > Speaker / Microphone

Option B: Connect to PC (USB-C Cable)

Connect PowerConf S500 to a PC using the provided USB-C cable. It will be ready tob use when it’s powered on

Option C: Connect to Smartphone or Tablet (Bluetooth)

1.  When powered on, PowerConf S500 will automatically enter Bluetooth pairing mode. Alternatively, press the Bluetooth button to enter Bluetooth pairing mode.
2. Select “Anker PowerConf S500” on your smartphone’s Bluetooth list to connect.

• Each time you power on PowerConf S500, it will automatically connect with the last successfully connected device if available. If not, press the Bluetooth button to enter Bluetooth pairing mode.
•  This speakerphone can pair up with two mobile devices via Bluetooth at a time. To pair with another Bluetooth device, press the Bluetooth button to re-enter Bluetooth pairing mode.
• When the speakerphone is connected to two devices via USB and Bluetooth at the same time, press and hold the play button for two seconds to switch between Bluetooth and USB modes.
• To disconnect the Bluetooth from one device, press the Bluetooth button again on the device that’s currently active.
•  If connection via the Bluetooth dongle fails, plug it into a USB port on your PC and then press the PC mute button four times. The light on the dongle will flash quickly. This indicates that the dongle has been reset with all pairing history cleared. The dongle will then connect with the speakerphone automatically.

Using Your PowerConf

LED Light Bar

Read More About This Manual & Download PDF:

References

• bluetooth.de
• usb-c.no is parked

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>