SPECTRA AQUA KNIGHT V3 Zeeaquarium LED Lamp User Manual

User Manual

AQUA KNIGHT V3

White          Royal Blue
  Blue            Violet

Channel A: Royal Blue 6pcs
Channel B: Blue 4pcs + Violet 2pcs
Channel C: White 3pcs

Installation

Step 1: fix the bracket on the lamp with screws and ensure that the screws are tightened
Step 2: fix the bracket foot, bracket and connecting rod together with screws, and fix the screws after selecting the appropriate length
Step 3: fix the lamp on the fish tank with bolts and tighten the screws to power on.

Function Instructions

1. Time channel
2. Dimming channel
3. Time/brightness level

1. ESC/Save
2. OK/Switch
3. Reduce
4. Increase

This lamp has 3 time Channels and 3 brightness Channels and uses touch buttons to control. The lamp will turn on and change color gradually.

Note:
Please read this manual before using, and keep the instruction manual properly.
Our company is not responsible for any defective caused by improper use and maintenance.
Please do not disassemble or assemble the product that may cause damage.

(1) Time setting

Step 1: Touch ”OK” button and hold for about 3 seconds, the display numbers flashing, to enter local time(Hours) setting.
Step 2: Touch ”+” or ”-” to adjust the Hours(From 0-24).
Step 3: Touch ”OK” to enter Minutes setting.
Step 4: Touch ”+” or ”-” to adjust the Minutes (From 0-59).
Step 5: Touch ”OK” to save time setting and enter Dimming setting, Or touch ”ESC” to save time setting and exit setting mode.

(1) Dimmer setting

Step 1: Touch ”OK” button and hold for about 3 seconds, the display numbers flashing, to enter setting, Please refer to the Time setting step as above.
Step 2:Touch ”OK” to enter dimming setting (”1” will be lighted on the LED screen).
Step 3: Set the First time period hours and minutes by touch ”+” or ”-”.
Step 4: Touch ”OK”, the display ”A” is lighted, numbers in the right are flashing to enter Channel A brightness setting.
Step 5: Press”+” or ”-” to increase/reduce intensity of Channel A(brightness changes from 0-100).
Step 6: Touch ”OK”, the display ”B” is lighted, numbers in the right are flashing, to enter Channel B brightness setting.
Step 7: Press”+” or ”-” to increase/reduce intensity of Channel B (brightness changes from 0-100).
Step 8: Touch ”OK”, the display ”C” is lighted, numbers in the right are flashing,to enter Channel C brightness setting.
Step 9: Press”+” or ”-” to increase/reduce intensity of Channel C (brightness changes from 0-100).
Step 10: Touch ”OK”, the display ”2” is lighted, to enter the second time period setting. Repeat Step 3 to step 9 to set ABC channels, brightness during the second time period. Repeat Step 3 to step 9 to set ABC channels brightness during the Third time period.

Touch ”ESC” to save the time and dimming setting. The lamp will run programmable everyday.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>