WALTEK KB2299 Air Fryer Instruction Manual

WALTEK KB2299 Air Fryer

Product Information

The tested product is an Air Fryer manufactured by Ningbo Kebao Electronic Co., Ltd. The model numbers available are KB2299(FAF001) and KB3299(FAF002). The air fryer is designed to cook food using hot air circulation, providing a healthier alternative to traditional frying methods.

Product Usage Instructions

1. Sample Cutting/Preparation: Before using the air fryer, ensure that the sample is properly prepared by cutting it into suitable sizes for cooking.
2. Sample Weighing: Weigh the prepared sample to determine the correct amount for cooking. Refer to the user manual for recommended serving sizes.
3. Sample Pretreatment: No specific pretreatment is required for using the air fryer. Simply place the prepared sample into the fryer basket.
4. Cooking Process: Set the desired temperature and cooking time on the air fryer control panel. Follow the user manual instructions for recommended settings based on the type of food being cooked.
5. Monitoring and Adjusting: During the cooking process, monitor the food’s progress and adjust the temperature or cooking time if necessary. Use caution when handling the air fryer as it may become hot during operation.
6. Completion and Serving: Once the cooking process is complete, carefully remove the food from the air fryer using oven mitts or tongs. Allow it to cool before serving.
7. Cleaning and Maintenance: After each use, clean the air fryer according to the instructions provided in the user manual. Regular maintenance and cleaning will ensure optimal performance and longevity of the product.

For further details on using the air fryer, please refer to the complete user manual provided by the manufacturer.

TEST REPORT

• Report No. ……………………………………………: WTN22F08173342C
• Applicant ……………………………………………..: Ningbo Kebao Electronic Co., Ltd.
• Address ………………………………………………..: No.148-2, Xin Lang Road, Langxia Street, Yuyao, Zhejiang, P. R. China
• Manufacturer…………………………………………: Ningbo Kebao Electronic Co., Ltd.
• Address ………………………………………………..: No.148-2, Xin Lang Road, Langxia Street, Yuyao, Zhejiang, P. R. China
• Sample Name………………………………………..: Air Fryer
• Sample Model ……………………………………….: KB2299(FAF001), KB3299(FAF002)
• Reference Model No. ……………………………..:
  • KB2199, KB3199, KB2599, KB3599, KB2699, KB3699,
  • KB2299A, KB2599A, KB3299A, KB3599A
• Test Requested……………………………………..: To determine the 1 kind of Persistent Organic Pollutants (POPs) content in the submitted sample with reference to Regulation (EU)2019/1021 and its amendment(EU)2020/784&(EU)2020/1203 &(EU)2020/1204&(EU)2021/115&(EU)2021/277.
• Test Conclusion ……………………………………: Pass (Please refer to next pages for details)
• Date of Receipt sample………………………….: 2022-09-07
• Testing period……………………………………….: 2022-09-07 to 2022-09-15
• Date of Issue …………………………………………: 2022-09-22
• Test Result ……………………………………………: Refer to next page (s)

Prepared By:

Waltek Testing Group (Foshan) Co., Ltd.

• Address: No.13-19, 2/F., 2nd Building, Sunlink International Machinery City, Chencun, Shunde District, Foshan, Guangdong, China.
• Tel: +86-757-23811398
• Fax: +86-757-23811381
• E-mail: info@waltek.com.cn.

Signed for and on behalf of Waltek Testing Group (Foshan) Co., Ltd.

Swing.Liang

Waltek Testing Group (Foshan) Co., Ltd.
http://www.waltek.com.cn.

Report No.: WTN22F08173342C

Sample photo

Reference Sample Photo

Test Results

Test method: With reference to In-house Method, analysis was performed by LC-MS.

Substance Names| Result (mg/kg)| Limit (mg/kg)| LOQ (mg/kg)
---|---|---|---
No.1
Perfluorooctanoic acid (PFOA), its salts and PFOA-related compounds| ND| ≤0.025mg/kg in substance or mixture,

≤ 1mg/kg in semi-finished products/parts,

≤2mg/kg in medical devices other than invasive devices and implantable devices,

≤20mg/kgin a substance to be used as a transported isolated intermediate

| 0.025
Conclusion| Pass| —| —

Note:

1. ND = Not Detected or lower than limit of quantitation
2. LOQ = Limit of quantitation
3. mg/kg = milligram per kilogram= ppm
4. As specified by client, only test the designated sample.

Description for Specimen

Testing flow chart

Photograph of parts tested

Remarks

1. The results shown in this test report refer only to the sample(s) tested;
2. This test report cannot be reproduced, except in full, without prior written permission of the company;
3. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver;
4. The Applicant name and Address, the sample(s) and sample information was/were provided by the applicant who should be responsible for the authenticity which Waltek hasn’t verified;
5. If the report is not stamped with the accreditation recognized seal, it will only be used for scientific research, education, and internal quality control activities, and is not used for the purpose of issuing supporting data to the society.
6. The sample material information (Model No. information) is provided by client, not verified by test laboratory. The samples of reference Model No. are not tested. Test laboratory not responsible for the accuracy, appropriateness, completeness and authenticity of the information provided by client.

Waltek Testing Group (Foshan) Co., Ltd.
http://www.waltek.com.cn.

References

• 深圳沃特检验集团有限公司

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>