Perrycom MXD8 Dynamic VOCAL MICROPHONE USER GUIDE
- June 12, 2024
- Perrycom
Table of Contents
Perrycom MXD8 Dynamic VOCAL MICROPHONE
Specifications
-
Type
Dynamic microphone -
Polar pattern
Unidirectional(Cardioid), rotationally symmetrical about the microphone axis, uniform with frequency. （Figure 1） -
Frequency response
50 to 18,000 Hz（Figure 2） -
Sensitivity
at 1,000 Hz Open Circuit Voltage） -53±2 dB, 1Pa=94dB SPL -
Rated impedance
500Ω -
Max. SPL ( 1 kΩ load )
155 dB SPL（THD ≦1% 1kHz） -
Connector
Integral 3-pin male XLR type -
Finish
Metal structure, grey, enamel-painted, matte finished -
Environmental conditions
MXD8 operates between -10 to +50 （14 to 122）with relative humidity between 0 to 95%. -
Dimensions
Φ51.0mm x 163.0mm（2.00 in. x 6.41in.），（Figure 3）
-
Net weight
320 g -
RoHS
MXD8 including the product and packages follow the instruction of EU 2002/95/EC and comply to RoHS.
Description
- MXD8 cardioid dynamic microphone is able to deliver authentic sound without any unnecessary sound coloration which is designed for speech and performance.
- Equipped with tailored diaphragm and precise directivity, MXD8 give full and powerful sound. The higher SPL and high-grade transient response of MXD8 compared with other microphones will make the stage performance strong and the penetrating.
- MXD8 is the correct choice for the perfectionists no matter outdoors or indoors, speech or performance.
Features
- Balanced and clear true sound
- Frequency response is good for intelligent recognition and the mid- high frequency band is bright, the low frequency band is solid powerful
- High SPL capacity
- On/off switch with locking function
- Newly-designed capsule shock mount
Accessories
Supplied Accessories
- Microphone clip
Knowing your microphone
Perrycom provides variety selection of microphones for professionals and amateurs. To know your microphone is the first step to successful result.
Type of transducer
Dynamics
Durable and simple structure, operates in all kinds of environments. A good dynamic microphone is capable to operate at very high sound pressure level without distortion. Due to structure limit, dynamics cannot be built as small as condenser, but dynamics don’t require power to operate.
About Frequency Response
-
Flat
Suitable for working at controlled environment, or for acoustic measurements. Although people pursuit flatness, but for none-professionals, it is a challenge to makes it works as expectation. -
Popular curve response
Based on years of practical experience of pro users. There are curves to be build for various applications, so that it is very simple to use the microphone for the purpose. Limiting bandwidth, and emphasizing are typical skill. -
Variable response
Incorporating switchable filters to eliminate interference, such as subsonic filter to cut air-conditioner and floor vibrations. And allows full flat when used in controlled environment.
Directivity
- Cardioid
Picks up most signal on axis. Rejects side and picks up least to the back. Suitable for live sound re-enforcement. Apparent proximity effect and most singer likes to
take this bass boost advantages which is not good for speech.
Using a handheld microphone
- For best signal to noise ratio, distance from the handheld microphone to the sound source shall be as short as possible.
- For higher gain before feedback and lowest background noise, the microphone shall be pointed directly to the sound source.
- (refer to the illustration below) The sensitivity of a super cardioid microphone is highest on axis and lowest at 120 to 135 degrees.
- To avoid interference between multiple microphones, each sound source shall be picked-up by one microphone, use as less microphones as possible in one space, or turn-on as less microphones as possible at the same time.
To reduce crosstalk between microphones, an 1:3 guide line shall be follow:
- The distance between microphone A to the sound source A is “1”, the distance between any other microphone to the sound source A shall be more than 3 times.
- When the (super) cardioid microphone get closer to the sound source, the low frequency response is boosted, as so call “proximity effect”.
- Experience singer takes advantages of the proximity effect to improve the richness of his/her voice or to increase the bass of the instrument as if an extremely high quality equalizer is used.
- Same idea to reduce the bass by increase the distance to reduce the bass when needed.
- Reflecting surface affect sound as well. Beware of these surfaces such as wall, table, or floor.
- Place the microphone away from the hard surfaces or directly contact these surfaces to form a pressure zone microphone.
- When using the microphone outdoor or in windy environment, additional foam wind screen helps to reduce wind noise.
- Keep grill pop screen clean to avoid degrading the sound quality.
- Do not expose the microphone at high humidity/temperature environment to avoid damage.
Mounting the microphone
- Pressure gradient microphone is very sensitive to vibration.
- Suitable shock mount for high performance microphone is necessary for extreme low noise recording.
- Sturdy stand can set the microphone exactly at the sweet spot and keep it there.
- Choose heavy duty microphone stand for studio condenser microphone which weights much more than handle microphone.
- Perrycom provides wide range of microphone stands for various demands.
- Big Foot Willie is specially developed for large condenser microphones that able to support 2 large microphones with stereo bracket for single point stereo recording.
- Extension foot on all the ‘E’ versions serve to mount heavy studio microphone in limit space live sound applications.
Maintenance
Condenser microphone shall be kept in low humidity environment for best sound performance. Store the condenser microphones in airconditioned room or dehumidifier to keep away from moisture. Clean air is another important factor. Keep away from smoking environment to avoid tar residuals.
Contact
Marketing and sales
- Perrycom
- +886-15995670339
- tony_chang@ksyola.com
FREQUENTLY ASKED QUESTIONS
What is the Perrycom MXD8 Dynamic Vocal Microphone?
The Perrycom MXD8 is a dynamic microphone designed primarily for vocal performances.
What are the key features of the MXD8 Dynamic Vocal Microphone?
The features may include a dynamic element, durable construction, and a cardioid pickup pattern.
Is the MXD8 suitable for live performances?
Yes, the MXD8 is designed for live vocal performances on stage or in other live settings.
Can I use it for recording in a studio?
While it's primarily designed for live use, it can also be used for studio recording, especially for vocals.
What is a dynamic microphone?
A dynamic microphone uses a diaphragm and a coil of wire to capture sound, making it rugged and suitable for live performances.
Does the MXD8 require phantom power?
No, dynamic microphones like the MXD8 do not require phantom power as condenser microphones do.
What is a cardioid pickup pattern?
A cardioid pattern captures sound primarily from the front and rejects sound from the sides and rear, reducing unwanted noise.
Does it come with any accessories?
It might include a microphone clip or pouch, but the included accessories can vary.
Is it suitable for both male and female vocals?
Yes, dynamic microphones like the MXD8 are versatile and can be used for various vocal types.
Can I use it with instruments?
While it's designed for vocals, you can use it with instruments like guitar amps or drums.
What's the frequency response of the MXD8 microphone?
The frequency response can vary, but dynamic microphones often have a relatively wide frequency range suitable for vocals.
Is it wireless or wired?
The MXD8 is typically a wired microphone, meaning it requires a physical connection to an audio source.
Can I use it for public speaking or presentations?
Yes, the MXD8 is suitable for public speaking or presentations where vocal clarity is important.
What's the durability of the MXD8 microphone?
Dynamic microphones are known for their durability, and the MXD8 is likely built to withstand the rigors of live performances.
Is it compatible with microphone stands?
Yes, the MXD8 can be mounted on standard microphone stands using a compatible clip.
DOWNLOAD THE PDF LINK:Perrycom MXD8 Dynamic VOCAL MICROPHONE USER GUIDE
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>