RYOBI RID1801 Cordless Impact Driver Instructions

: June 12, 2024
: RYOBI

Table of Contents

RYOBI RID1801 Cordless Impact Driver
Product Information
Product Usage Instructions
IMPACT DRIVER SAFETY WARNINGS
INTENDED USE
MAINTENANCE
SYMBOLS
INSTALLATION INSTRUCTIONS
Product Specifications
Battery and charger
GUARANTEE
EC DECLARATION OF CONFORMITY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

RYOBI RID1801 Cordless Impact Driver

RYOBI-RID1801-Cordless-Impact-Driver-PRODUCT

Product Information

Product Name: RID1801
Intended Use: Fastening / removing screws and bolts
Safety Certifications: CE conformity, EurAsian Conformity Mark

Product Usage Instructions

WARNING

Read all safety warnings and instructions to prevent electric shock, fire, and serious injury.
Save all warnings and instructions for future reference.

Impact Driver Safety Warnings

Hold the power tool by insulated gripping surfaces when working near hidden wiring to avoid electric shock.
Ensure the tool is connected to the correct voltage marked on the name plate.
Do not use the tool if its cover or any bolts are missing; replace them before use.
Secure tools when working in elevated positions.
Avoid touching the blade, drill bit, grinding wheel, or other moving parts during use.
Do not start the tool when its rotating component is in contact with the work piece.
Wait for the moving parts to come to a complete stop before laying the tool down.
Only use recommended accessories or attachments to prevent hazards.
Use identical replacement parts for servicing.
Wear ear protectors to prevent hearing loss.

WARNING: The impact driver is not designed to be used as a drill.

Maintenance

Use only identical Ryobi replacement parts for servicing to prevent hazards or product damage.
Avoid using Solvents when cleaning plastic parts as they can cause damage. Use clean cloths to remove dirt, dust, oil, grease, etc.

Note: Please read the instructions carefully before starting the machine.
Note: Wear ear protection and eye protection when operating the product.
Note: Recycle waste electrical products instead of disposing of them with household waste. Check with your Local Authority or retailer for recycling advice.

Important: It is essential that you read the instructions in this manual before operating this machine.

Subject to technical modifications

WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

IMPACT DRIVER SAFETY WARNINGS

Hold power tool by insulated gripping surfaces, when performing an operation where the fastener may contact hidden wiring. Fasteners contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
Make sure that the tool is only connected to the voltage marked on the name plate.
Never use the tool if its cover or any bolts are missing. If the cover or bolts have been removed, replace them prior to use. Maintain all parts in good working order.
Always secure tools when working in elevated positions.
Never touch the blade, drill bit, grinding wheel or other moving parts during use.
Never start a tool when its rotating component is in contact with the work piece.
Never lay a tool down before its moving parts have come to a complete stop.
The use of accessories or attachments other than those recommended in this manual might present a hazard.
When servicing use only identical replacementparts.
Wear ear protectors. Exposure to noise can cause hearing loss.

INTENDED USE

You may use this product for fastening / removing screws and bolts.

CAUTION: The impact driver is not designed to be used as a drill.

MAINTENANCE

When servicing, use only identical Ryobi replacement parts. Use of any other parts may create a hazard or cause product damage.
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc.
Always wear safety goggles or safety glasses with side shields during power product operation or when blowing dust. If operation is dusty, also wear a dust mask.
To avoid serious personal injury, always remove the battery pack from the product when cleaning or performing any maintenance.

ENVIRONMENTAL PROTECTION

Recycle raw materials instead of disposing of as waste.
The machine, accessories and packaging should be sorted for environmental-friendly recycling.

SYMBOLS

Safety alert
CE conformity
EurAsian Conformity Mark
Please read the instructions carefully
before starting the machine.
Wear ear protection
Wear eye protection
Recycle
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.

INSTALLATION INSTRUCTIONS

RYOBI-RID1801-Cordless-Impact-Driver-FIG-3

RYOBI-RID1801-Cordless-Impact-Driver-FIG-4

Product Specifications

Voltage: 18 V
Chuck: 6,35 mm
Switch: Variable speed
No load speed: 0 – 3,200 min-1
Maximum torque: 220 Nm
Blows per minute: 0 – 3,400 IPM
Weight: excluding battery pack: 1,20 kg
Measured sound values determined according to EN 60745:
A-weighted sound pressure level: LpA = 93,0 dB(A)
- Uncertainty K: 3 dB
A-weighted sound power level: LWA = 104,0 dB(A)
- Uncertainty K: 3 dB
Wear ear protectors.
The vibration total values (triaxial vector sum) determined according to EN 60745:
Impact tighten, Vibration emission value: ah = 1,0 m/s2
- Uncertainty K: 1,5 m/s2

Battery and charger

Compatible battery pack (not included)
- BPL-1815
- BPL-1820
- RB18L13
- RB18L15/ BPP-1815
- RB18L25/ BPP-1817
- RB18L26
- RB18L40
Compatible charger (not included)
- BCS618/ BCS618
- BCL14181H/ BCL14181H
- BCL14183H/ BCL14183H

WARNING

The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period.

An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns.

GUARANTEE

In addition to any statutory rights resulting from the purchase, this product is covered by a guarantee as stated below.

The guarantee period is 24 months for consumers and commences on the date when the product was purchased. This date has to be documented by an invoice or other proof of purchase. The product is designed and dedicated to consumer and private use only. So there is no guarantee provided in case of professional or commercial use.
There is, in some cases (i.e. promotion, range of tools), a possibility to extend the warranty period over the period described above using the registration on the www.ryobitools.eu website. The eligibility of the tool is clearly displayed in stores and/or on packaging. The end user needs to register his/her newly-acquired tools online within 8 days from the date of purchase. The end user may register for the extended warranty in his country of residence if listed on the online registration form where this option is valid. Furthermore, end users must give their consent to the storage of the data which are required to enter online and they have to accept the terms and conditions. The registration confirmation receipt, which is sent out by e-mail, and the original invoice showing the date of purchase will serve as proof of the extended warranty. Your statutory rights remain unaffected.
The guarantee covers all defects of the product during the warranty perioddue to defaults in workmanship or material at the purchase date. The guarantee is limited to repair and/or replacement and does not include any other obligations including but not limited to incidental or consequential damages. The warranty is not valid if the product has been misused, used contrary to the instruction manual, or being incorrectly connected. This guarantee does not apply to:
- any damage to the product that is the result of improper maintenance
- any product that has been altered or modified
- any product where original identification (trade mark, serial number) markings have been defaced, altered or removed
- any damage caused by non-observance of the instruction manual
- any non CE product
- any product which has been attempted to be repaired by an nonqualified professional or without prior authorization by Techtronic Industries
- any product connected to improper power supply (amps, voltage, frequency)
- any damage caused by external influences (chemical, physical, shocks) or foreign substances
- normal wear and tear of spare parts
- inappropriate use, overloading of the tool
- use of non-approved accessories or parts
- carburetor after 6 months, carburettor adjustments after 6 months
- power tool accessories provided with tool or purchased separately. Such exclusions include but is not limited to screw driver bits, drill bits, abrasive discs, sand paper and blades, lateral guide
- components (parts and accessories) subject to natural wear and tear, including but not limited to carbon brushes, chuck, power cord, auxiliary handle, sanding plate, dust bag, dust exhaust tube
For servicing, the product must be sent or presented to a RYOBI authorized service station listed for each country in the following list of service station addresses. In some countries your local RYOBI dealer undertakes to send the product to the RYOBI service organisation. When sending a product to a RYOBI service station, the product should be safely packed without any dangerous contents such as petrol, marked with sender’s address and accompanied by a short description of the fault.
A repair/replacement under this guarantee is free of charge. It does not constitute an extension or a new start of the guarantee period. Exchanged parts or tools become our property. In some countries delivery charges or postage will have to be paid by the sender.
This guarantee is valid in the European Community, Switzerland, Iceland, Norway, Liechtenstein, Turkey and Russia. Outside these areas, please contact your authorized RYOBI dealer to determine if another warranty applies.