Pitched Party PKMC500ST Karaoke Microphone with LED Light User Guide
- June 12, 2024
- Pitched Party
Table of Contents
Pitched Party PKMC500ST Karaoke Microphone with LED Light User Guide
WHAT’S INSIDE THE BOX?
A: Karaoke. Microphone
B: Quick Start Guide
C: Warranty Card
D: USB-C* Charging Cable
E: 3.5mm O Caux cable
DEVICE OVERVIEW
A. Volume+ Button
- Press to increase volume.
- Press and hold to ploy next song
- Press twice to furn sound reactive fights ON/OFF
B. Volume- Button
- Press o decrease volume
- Press and hold to ploy previous song
- Press twice to switch between three different lighting modes when the sound reactive lights ore ON
C. Microphone Button
- Press and hold to turn off the microphone input. [You may stiluse the Bluetooth speaker function but the microphone. will not pick up audio)
- Press to switch between the following voice effetcs:
- Standard Voice
- Chipmunk Voice
- Deep Voice
- High Pitch Voice
- Beast Voice.
D. Power Button
- Press to play or pause
- Press and hold to furn the. device ON/OFF
- Press twice to switch between Bluetooth® mode and Memory Card mode.
E. Memory Card Siot
- Play music files from your memory card (soid separately) by inserting it info the memory card siot found under the microphone handle. The: device will enter Memory Cord mode automatically
F. Charging Port / Audio Input / Audio Recording
G. Headphone Jack
H. Connection Hole.
- Connection hole for waterproof silicone plug
INITIAL SETUP
Charging Your Device
The charging port is located at the bottom of the microphone handle. Use the
included USB-C® charging ‘cable to connect your microphone 10,0 power source
and charge your device for 3 hours,
Bluetooth Pairing
- Place your smartphone or tablet within 3 feet from your microphone. Be sure fo disable: Bluetooth on other nearby paired devices,
- Once your microphone fully charged, the device. will automatically enter Bluetooth® mode upon startup (as long as memory card s not inserted). I memory. card is inserted, the device will prioritize Memory Card mode and will play audio from the memory card upon startup. Press the POWER button twice 10 switch to Bluetooth® mode.
- 0n your smartphone or tablet, search for the. Bluetooth® device named “PKMC500” and op to ‘connect. A blue indicator light will confirm successful paring.
AUDIO RECORDING
-
Use the included USB-C2fo 3.5mm AUX cable to ‘connect your microphone to @ mobile device.
-
Make sure your microphone i powered ON and already to play.
-
On your mobile device, open an audio recording app of your choice and start recording.
-
Select the song you wish fo record and ploy it through the microphone.
-
Once finished, go back o the audio recording app ‘and stop recording.
NOTE: The audio recording funcion is compalible. with Android™ devices. Apple® users need fo use an Apple® compoible cable or adapler for recording fsold separately).
SPECIFICATIONS
- Bluetooth Wireless Connectivity
- Sound Reactive LED Lights
- IPXS Water Resistant [sprayproof]
- Built in Rechargeable Battery
- Over 3.5 hours of play time per charge based on a 70% Volume level
NEED HELP?
For customer support regarding your device, pieces submit request by emailing
support@dpaudiovideozendesk.com. You
will be. provided a ticket number regarding your inquiry, which You can refer
to when conflicting us further.
You may ciao reach 0 DPAV customer service. representative by calling
1-833-909.2673. We ore available Monday – Friday, fam – Spm PST excep major
holdoys. ‘DPAV strongly urges customers o meal heifer inquiry prior 1o
ceiling, o3 his will enable us o better asdst you.
Please make sure fonofe fhe model number and a description of your inquiry.
Thank you for purchasing a Packed Party product.
FCC CAUTION
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
The Bluetooth® trademarks—including the BLUETOOTH word mark, the figure mark (the runic “B” and oval design), and the combination mark (Bluetooth word mark and design)—are owned by the Bluetooth SIG. USB, Android and Apple are used to solely describe the compatibility of our technology and in no way are intended to infringe on any intellectual property rights of any respective protected marks.
Keep this product away from water and other liquids to prevent potential risks. Avoid storing in high temperatures and humid environments for extended periods of time.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>