gastech D-Guard2 Fixed Gas Detector User Guide
- June 12, 2024
- gastech
Table of Contents
gastech D-Guard2 Fixed Gas Detector
Product Information
The GasTech D-Guard2 is a gas detection system designed to provide reliable gas monitoring and detection for various applications. It features advanced technology and a user-friendly interface for easy operation and maintenance.
Contact Information
- Website: gastech.com
- Support: +61 8 6108 0000
- Email: info@gastech.com
INSTALLATION
Make sure the gland faces the ground
OPEN THE CASE
Use the Service Tool to loosen the four screws which hold the lid on.
WARNING: The D-Guard² must be installed by an approved person. Incorrect installation can cause injury or death to personnel.
- Read the instruction manual
ELECTRICAL INSTALLATION
Connect the D-Guard² to a DC supply voltage of 13-28V. Make sure the outer diameter of the cable sheath is between 10 and 14 mm to allow the gland to seal properly.
SPLASH SCREEN
**WARM-UP SCREEN UNLOCK THE MENU SCREEN Put the Service Tool over
the magnetic sensor location to activate the user menu.
ACCESS CAL MENU ZERO CALIBRATION**
SPAN CALIBRATION
For a full version of the manual visit gastech.com/d-guard2
QR SCAN
CONTACT
- TEL: +61 8 6108 0000
- HEAD OFFICE
- ADDRESS: 24 Baretta Road Wangara WA 6065
- Phone: +61 8 6108 0000
- info@gastech.com
- SYDNEY OFFICE
- ADDRESS: Suite G01, 10 Tilley Lane Frenchs Forest NSW 2086
- Phone: +61 2 9451 0054
- gastech.com
- ADDRESS: BRISBANE OFFICE PO Box 349 Cannon Hill QLD 4170
- Phone +61 7 3160 0901
gas detection
designed for support
gastech.com
References
- Fixed Gas Detectors, Portable Gas Detectors, Flame Detectors, Gas Monitors, Detector Tubes, Multi Gas Detection Systems by Gastech
- GasTech Flammable and Toxic Detection D-Guard2 Fixed Gas Detector | Gastech