wek-tec 1L-RepRate-V2 Intense Pulsed Light System User Manual
- June 12, 2024
- wek-tec
Table of Contents
1L-RepRate-V2 Intense Pulsed Light System
User Manual INTENSE PULSED LIGHT SYSTEM XeMaticA-1L-
RepRate-V2
automatic R &D system with one water-cooled flash lamp
1L-RepRate-V2 Intense Pulsed Light System
for evaluation tests in food, pharmaceutical, cosmetic, bio-medical, and tech. applications:
User friendly advantages:
- Selecting most common UV intensities to samples by varying 3 pulse energies, 3 pulse repetition rates and distance between a sample and the lamp, tabulated in the manual;
- Timer starts and stops pulsing from 1 sec (the single pulse at 1 Hz) to 1 hour of pulsing;
- Controlling UV intensities by a UVC sensor with outputs to a digital scope, included.
- Friendly controls with LED lighted rotary switchers:
- based on pre-programmed chips to last for many years without software or hardware upgrades.
Safety features:
- Flash lamps are filled with Xe-gas (no Mercury), water cooled, no ozone neither heat to samples.
- The large red button is the emergency stop.
- The chamber door is automatically locked and sealed during pulsing.
- No EM waves or UV leaks outside during pulsing.
El connection:
208-240 VAC, 1-phase, 50-60 Hz, max 2kw.
Size, Weight, Enclosure Material:
60 cm wide x 40 cm high x 53 cm deep,
Polished stainless-steel, weight 42 kg.
Highlights:
- Pulse energies 200J, 350J, 500J.
- Max spectral output – on request UVC to IR,
- Repetition rates 1Hz, 2Hz and 3Hz.
- Timed burst pulsing 1-60s + single pulsing.
- 180° sample exposure.
- water-cooled by an internal water system, which also takes most of IR out of the lamp spectra.
PL chamber:
-18 cm wide x 16 cm high x 18 cm deep,
– distance between edges of lamp reflectors and the sample shelf can be from 2
to 8 cm.
– provides 180° sample exposure with ca. 20% uniformity due to 98% reflectors
over lamps and on all sides around the sample shelf.
Sterilization UV Efficiency:
up to 6 logs /pulse for common bacteria,
up to 3 logs /pulse for common spores.
Option:
adjusting the lamp spectra to a desired maximum output in UV, visible and IR
spectra plus using respective filters.
Industrial version:
the lamp module is mounted over a conveyer and connected by
cables with the controller.
This is our novel Pulsed Light system, other our PL R&D systems are in use in universities and production labs worldwide.
© 2023 Wek-Tec e. K.
Kronenstr.3
D-78244 Gottmadingen
+49 (0)172 70844 37,
dr.alex.wekhof@wek-tec.de
www.wek-tec.de
References
- www.wek-tec.de – offers non- invasive and up to absolute sterilization methods:
- www.wek-tec.de – offers non- invasive and up to absolute sterilization methods: