JustNow JNG500-FS02 Portable Power Station User Manual

JustNow JNG500-FS02 Portable Power Station User Manual

Important notice

Before using this product, please read this user manual carefully to familiarize yourself with the characteristics of this product. Failure to operate this product correctly may result in damage to the product or personal property, resulting in serious personal injury. Without following the instructions provided by JustNow outdoor power supply, do not use electrical equipment that is incompatible with this product or change the product in any way. These safety guidelines include instructions for safety, operation, and maintenance. In order to operate the product correctly and avoid product damage or serious injury, you must carefully read and follow all instructions and warnings in the user manual before installation or use.

Warnings

1. Do not short-circuit the product connection. To avoid short circuits, keep away from all metal objects.
2. Do not heat or incinerate this product, or put it in fire, water, or other liquids. Keep away from a high-temperature environment. Do not expose the product to direct sunlight.
3. Keep the product away from damp, rainy, and dusty environments.
4. Do not disassemble or reassemble this product, otherwise, it may damage the equipment and endanger the safety of life.
5. Do not drop, place heavy objects, or subject the product to strong impact.
6. Please keep this product out of reach of children and pets.
7. Please do not cover the product with towels, clothes, and other items.
8. Do not overcharge the product, do not leave it unattended when charging, and disconnect the power immediately after it is fully charged.
9. Please stay away from TV, radio, and other equipment when charging to avoid radio wave interference.
10. Do not over-discharge the product. Please charge it in time when the low-voltage warning reminds you to extend the battery life.
11. Please use the power line provided by JustNow to charge the product to ensure safe operation.
12. If you do not use the product for a long time, please disconnect the cable before storing it in idle, and charge the battery once every 3 months.
13. Do not dispose of this product and garbage together, please recycle and dispose of this product according to local regulations.
14. Pay attention to safety during operation, and don’t be smashed to your feet by this product
15. Please refer to the user manual of the corresponding device for confirmation.

Package Content

Function Descriptions

1. Wireless Charging
2. LED Light
3. DC Input
4. DC Output Button
5. Car Socket
6. LED Screen
7. Power Button
8. LED Light On/Off Button
9. USB-A Output
10. 50Hz/60Hz frequency switch (Japanese standard only)
11. USB On/Off Button
12. USB-C
13. AC Output On/Off Button
14. AC Socket

Screen Display

LED Screen Display

Specification

1. When the battery pack voltage is 19.SV, the AC function of the product stops using, and the DC part of the function can continue to be used up to the battery pack voltage 18.2-18.6V. At this time, the product will enter the dormant state due to low voltage protection; the product must be charged at this time.
2. When the temperature is about -l0°C, only the USB function and the LED light can be used normally; AC can be turned on when the ambient temperature is less than -5°C, USB/Type-C, and cigarette lighter plug-in can be turned on normally ( The temperature error is within ±2°c).
3. Due to the low-temperature properties of lithium-ion iron phosphate batteries, it is recommended that the product be used in an environment above -3°C.
4. DC charging restrictions: the product cannot be charged normally when the battery is overcharged or the battery temperature reaches the high-temperature protection point of 65° or less than -5°C;
5. During the use of Type-C, pressing the POWER button will enter the dormant state. At this time, you need to unplug the Type-C cable before you can activate the product through the POWER button.
6. ln order to save energy, when the product has no load when the DC function is turned on or the total load power is less than SW or the actual load power is less than SW after the AC function is turned on, the product will be forced to sleep within 8 hours.

Charging Ways

Please charge the product with an adapter. The LED display will show the charging power and current battery level. When the battery level icon is full, it means fully charged.

1. When the battery icon is full and always on, it means it has been fully charged, the built-in overcharge protection circuit control module starts, and the charging stops automatically. Please disconnect the device and the power outlet in time.
2. This product supports MPPT input voltage range is 12-29V/input current 4-7A (recommended 18VlO0W)
3. This product supports a car charging voltage range is 12-14V/input current SA.

Product specifications

• Product number:  JNGS00-FS0l
• Battery energy:  345.6Wh(l9.2V-18Ah)
• AC output waveform:  Pure sin e wave
• input
• • Solar Charge Input:  12-29V DC (MAX 120W)
• Car charger charging:  12-14V-4-6A (MAX 85W)
• output
• *Wireless charging2:**  10w
• *Type-C (Outputl):**  SV/9V/12V/15V/20V-3A(MAX 60W)
• *USB-A (Output 3):**  SV-2.4A (MAX 30W)
• *Car cigarette lighter (Output l):**  12V-10A (MAX 120W)
• Rated power:  580W Peak power: 1000W
• AC Output:  100-12ovac 50Hz/60Hz
• Battery Type: LiFePO4 Battery
• Cycle life:  Remaining capacity above 80% after 2099: Cycle
• Charging temperature:  0’C-40’C
• Discharge temperature:  -10’C-40’C
• Storage temperature:  -10’C-40’C
• Idle Life:  It is recommended to charge the product every 3 months
• Product Size:  287xl6lx230mm
• Weight:  6.6kg

• ---

Common fault prompts and solu­tions

The product cannot be powered

1. Please make sure that the POWER button and output buttons are turned on. (If the ambient temperature is not within the range of -l0°C to 40°C, the power supply may not be available).

2. When connecting the power plug of electrical equipment to the machine, be sure to insert the plug into the root. If there is any water or foreign matter on the charger connec­tor or charging input terminal, remove it.

4. Please check the remaining power on the display. If the remaining power is less than 10%, you need to recharge the portable emergency power supply.

5. Please check whether your device voltage and power consumption are higher than the output power limit of this product. If the upper limit is exceeded, short circuit protection, overcharge protection, over current protection, discharge protection, temperature protection, overload protection, etc. will be activated, and the portable emergency power supply will automatically shut down. Please check whether the protection circuit is normal.

What is the common display fault prompts?

1. 1. When the USB is over-current or short-circuits protected, the port closes the output, and the USB icon flashes to warn.

2. When Type-C over-current or short-circuit protection, the port closes the output, and the Type-C icon flashes to warn.

3. When the cigarette lighter outputs over-current or short-circuit protection, the port closes the output, and the DC-OUT icon flashes to warn.

4. 1. When AC continues to output to the low voltage of the product, the AC icon on the screen will report an error and flash, and the AC will turn off the output.

5. When the AC output triggers the module over-temperature protection, the AC closes the output and automatically restores the output after the over-temperature state is released;

6. 1. When the AC is overloaded, the inverter board AC shuts down the output; the “AC” on the screen will flash and alarm. After the overload state is removed, press the AC output button, and the screen will clear the error message, and then restart the AC function button to restore the output.

7. When the AC is over-voltage, the AC closes the output, after removing the overvolt­agestate, restart the AC function key to restore the output.

8. When the AC output is short-circuited, the AC closes the output. After the shortcircuit states are removed, restart the AC function key to restore the output.

9. When the battery is 6S°C over temperature protection, all outputs will be turned off. The temperature value shows the highest battery temperature value. The temperature icon and temperature value flash at the same time (1 flash for a second), and the fan works until the battery over temperature protection is released.

10. The display is completely black, disconnect all electrical equipment on the product. After charging the power for 2-3 minutes, turn on the POWER button and the display will be reset.

When I charge the portable power supply, the adapter comes very hot, is this normal?

Our portable power supply is equipped with an AC adapter. According to safety standards, the maximum temperature of the adapter is 75°C. For your safety, the configured adapter has passed UL2743, CE, GS, PSE, TUV, ETL, and other certifications.

What is the capacity of 345.6Wh?
345.6Wh means this product can run a 345.6W (watt) device for one hour. Of course, a device that consumes lO0W (watts) of power can run for 3.45 hours. (This is a theoreti­cal value, the actual use time will be reduced by 10%-15% due to the discharge loss)

Warranty Policy

This guarantee guarantees that the product will be replaced free of charge under the conditions stipulated in the guarantee policy. Please read the guarantee carefully and keep it in a safe place.

1. Only when the product is used in accordance with the instructions in operating instructions and fails within the warranty period, it will be replaced. Products replaced during the warranty period become the property of the company.
2. To get a warranty replacement, please send this warranty card together with the product. The shipping cost of returning the product for replacement is the customer s responsibility.
3. Under the following conditions, it will not be replaced during the warranty period.
4. Failure or damage caused by the use of a non-designated power adapter.
5. Failure or damage caused by improper storage and storage (complete discharge).
6. Failure or damage caused by failure to follow the precautionary measures described in the instruction manual.
7. Failure or damage caused by improper repair, disassembly, or modification. say
8. There is no guarantee for secondary damage caused by the malfunction of this product.
9. We are not responsible for any failure or malfunction of other equipment caused by the use of this product.
10. This manual is only valid for use in (this sales area), and the company has the final interpretation right.
11. This manual will not be reissued, so please keep it in a safe place.
12. 13. 14. 15. If the dealer’s name is not written or stamped, please submit proof of the date of purchase and the dealer’s name to the dealer who purchased the product, such as a receipt issued by the dealer. If you do not have such proof, please contact your dealer or the company from which you purchased the product. If you purchased the product in our online store, you must provide proof of the date of purchase, such as a screenshot of the invoice, order number, or order history, together with.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• • Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

Warranty card

JustNow

Shenzhen Noran Technology Co., Ltd.
7L, Nanyuan Maple Leaf Building, No.1088, Nanshan Street, Nanshan District, Shenzhen City, PRC
TEL:+8618002546297
Email: support@justnowpower.com.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>