airlive POE-GSH410-60 Gigabit PoE Switch User Manual

: June 12, 2024
: airlive

Table of Contents

Copyright & Disclaimer
Disposal
Overview
LED Information.
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

airlive POE-GSH410-60 Gigabit PoE Switch User Manual

Copyright & Disclaimer

No part of this publication may be reproduced in any form or by any means, whether electronic, mechanical, photocopying, or recording without the written consent of AirLive Technology Corp.

AirLive Technology Corp has made the best effort to ensure the accuracy of the information in this user’s guide. However, we are not liable for the inaccuracies or errors in this guide. Please use with caution. All information is subject to change without notice

All Trademarks are properties of their respective holders.

Disposal

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

For more detailed specifications please see the datasheet. The datasheet can been found online on www.airlive.com

** Specifications are subject to change and improvement without notice.

Overview

5/6-Port Gigabit PoE Switch with VLAN and (SFP port POE-GSH411-60-AT)
Compliant with the PoE technology 802.3at/af, the AirLive POE-GSH411-60 Gigabit switch supports a standard power of 15.4W (802.3af) and has a max of 30W (802.3at) on Port 1~4 with either 1 SFP port and 1 Gigabit Uplink port (411), 1 Gigabit Uplink port (410), 2 Gigabit Uplink ports (420). The switch automatically detects and adaptively supplies needed power to connected PoE devices; for non-PoE devices, it will just transfer data intelligently. For the application where management is not really needed but VLAN is useful and budget is controlled, the AirLive POE-GSH410/411/420 can help. Using a smart DIP-switch to turn the POE-GSH410/411/420 VLAN feature and PoE Watchdog on. Moreover, the switch also supported a Extend mode which can support data and power up to 250meter at 10Mbps over Cat.5e cable that help where a PD is installed far away, and power source is hard to get.

Power On Switch
Power On the POE-GSH410/411/20-60 Switch. The Switch is powered by an AC/DC power adapter working at 52V and 1.15A. Please use the adapter which came with the switch to power it on.

Switch Connections
DIP Switch Control.
Extend (E): Link Extension mode, PoE power supply and data transmission distance can be extended to 250 meter at a transmission rate of 10Mbps.
VLAN (V): Port isolation mode. In this mode PoE Ports (1~4) cannot communicate with each other and can only communicate with the UP-Link port.
Watchdog (D): Enable the PoE port self-healing network restart function. When a connected PD devices does not send data, the switch will repower the device automatically.

POE-GSH410-60

POE-GSH411-60-AT

POE-GSH420-60

LED Information.

Symbol| Indicator Function| State| Description| Colour
---|---|---|---|---
PWR or P| Work indicator| On| Normal| Green
Off| Switch no power supply or failure
Blink| System abnormality or failure
PoE| PoE| On| Normal power supply| Yellow
Blink| PD device failure or power overload
Off| No connected PD or PoE power off
Link| Network| On| Link is ok| Green
Blink| The link port is receiving/sending data
Off| Link failure or port failure
L/A or F| Optical fiber| On| The optical fiber port is ok| Green
Blink| The optical fiber port is receiving/sending data
Off| Optical fiber failure or port failure
Speed or 1000M| Port rate| On| Gigabit transmission| Green
Off| Non-gigabit transmission
| | Function Switch|
E| 250m| Turn the switch to the symbol, then the function is turned on| Enable the PoE port 10M/250m long-distance transmission function
V| VLAN| Enable PoE port VLAN isolation function
D| Watchdog| Enable the PoE port self-healing network restart (watchdog) function