Festive Lights ConnectGo Outdoor Star Christmas Silhouette Icicle Lights Instructions

Festive Lights ConnectGo Outdoor Star Christmas Silhouette Icicle Lights

PRODUCT INFORMATION

MODEL NAME: Festive Lights ConnectGo Outdoor Star

In the interest of the safe and proper use of this product, please read these instructions carefully and retain them for future reference.

**General

**

This product is only for use with products in our Connect Go 31V connectable range. 2. All products in this range come with weatherproof, 2-pin connectors, which will connect seamlessly with all items in the 31V system range. 3. Check your power rating label for the maximum LED quantity and power consumption of this product and do not exceed this maximum. 4. Products in this 31V range are manufactured to IP44 standards allowing for indoor and seasonal outdoor use.

Before you start

1. If using the transformer power source, always connect indoors/ in a suitable weatherproof enclosure to ensure a safe connection.
2. Avoid using sharp-edged tools or mounting accessories (e.g. metal wires) to hang or fasten any part of your system.
3. This product MUST NOT BE MODIFIED; if any modification is made i.e. cutting, extending lead wires, or using a different power source than supplied, the warranty will be invalidated and may render the product unsafe.
4. The LED bulbs used are designed for a long life and are non-replaceable. Do not attempt to repair or replace them.

INSTRUCTIONS

1. On the starting set, connect the male connector (2 pins) to the female connection on your chosen power source (2 hole) and screw the seal over the new connection firmly. Ensure that the connection is made with the correct polarity.
2. To connect additional products, remove the end cap from the original set and connect on the additional product (ensuring correct polarity), check the rubble ‘ring is secure, and seal the connection using the screw seal provided. Once you connect the last product in the series, ensure that the end cap is securely fastened to finish the light chain.

Note for CCi025: Only 1,000 LEDs/5 SETS can be run from a single port at any one time. So if your display contains more than 1,000/5 SETS then simply use the other ports to continue your display.

Fixing

1. Before fixing, it is recommended that you test all products and check all connections are secure.
2. Before connecting to an electricity supply, check that no wires are damaged and water seals (rubber “o” rings) are in place.
3. Make sure you connect the power supply to a regular 240V socket,but do not switch oit n until all connections are complete.
4. Carefully position cables to avoid a ‘tripping’ hazard and away from sources of direct heat.

• UK importer: Fest!ve L! gets Ltd, Preston Road, Charnock Richard, Chorley, Lancashire, PR7 SHH
• EU importer: Festive Lights BV, Utrechtseweg 341, 3878 EL Amersfoort, Netherlands

STORAGE

Note :

1. The lifespan of this system is subject to how it is handled. Make sure it is handled carefully during assembly, dismantling, and storage.
2. Dry thoroughly before storage, as dampness can shorten the life.

For any technical information relating to this product, please email Festive Lights Ltd at contact@festive-lights.com. We aim to respond within 2 working days. Alternatively, contact our helpline on (01257) 792771. This service is available between 9.00 am – 5.00 pm Monday to Friday.

Made in China

Documents / Resources

| Festive Lights ConnectGo Outdoor Star Christmas Silhouette Icicle Lights [pdf] Instructions
ConnectGo Outdoor Star Christmas Silhouette Icicle Lights, ConnectGo, Outdoor Star Christmas Silhouette Icicle Lights, Star Christmas Silhouette Icicle Lights, Christmas Silhouette Icicle Lights, Silhouette Icicle Lights, Icicle Lights, Lights
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>