Festive Lights ConnectGO Outdoor LED String Lights Instruction Manual

Festive Lights Connect GO Outdoor LED String Lights

Storage/ Contact

Note: the lifespan of this system is subject to the way in which it is handled. Make sure it is handled carefully during assembly, dismantling and storage. 2. Dry thoroughly before storage, as damp can shorten the life. For any technical information relating to this product, please email Festive Lights Ltd on contact@festive-lights.com. We aim to respond within 2 working days. Alternatively, contact our help line on (01257) 792111. This service is available between 9.00am – 5.00pm Monday to Friday.

In the interest of the safe and proper use of this product, please read these instructions carefully and retain them for future reference.

General

1. This product is only for use with products in our Connect Go 31V connectable range. 2. All products in this range come with weatherproof, 2 pin connectors, which will connect seamlessly with all items in the 31V system range. 3. Check your power rating label for maximum LED quantity and power consumption of this product and do not exceed this maximum. 4. CG027 string lights are manufactured to the IP65 standard which allows for indoor and outdoor use all year round.

Before you start

1. If using the transformer power source, always connect indoor/ in a suitable weatherproof enclosure to ensure a safe connection.
2. Avoid using sharp-edged tools or mounting accessories (e.g. metal wires) to hang or fasten any part of your system.
3. This product MUST NOT BE MODIFIED; if any modification is made i.e. cutting, extending lead wires, or using a different power source than supplied, the warranty will be invalidated and may render the product unsafe.
4. The LED bulbs used are designed for long life and are non-replaceable. Do not attempt to repair or replace them.

1. On the starting set, connect the male connector (2 pin) into the female connection on your chosen power source (2hole) and screw the seal over the new connection firmly. Ensure that the connection is made with the correct polarity.
2. To connect additional products, remove the end cap from the original set and connect on the additional product (ensuring correct polarity), check the rubble ‘o’ring is secure and seal the connection using the screw seal provided. Once you connect the last product in the series, ensure that the end cap is securely fastened to finish the light chain.

Note for CCi025: only 1,000 LEDs/5 SETS can be run from a single port at any one time. So if your display contains more than 1,000/5 SETS then simply use the other ports to continue your display.

Fixing

1. Before fixing, it is recommended that you test all products and check all connections are secure.
2. Before connecting to an electricity supply, check that no wires are damaged and water seals (rubber “o” rings) are in place.
3. Make sure you connect the power supply to a regular 240V socket, but do not switch on until all connections are complete.
4. Carefully position cables to avoid a ‘tripping’ hazard and away from sources of direct heat.

UK !importer: Festive Lights Ltd, Preston Road, Charnock Richard, Chorley, Lancashire, PR7 SHH EU importer: Festive Lights BV, Utrechtseweg 341, 3878 EL Amersfoort, Netherlands

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>