Festive Lights CG049M ConnectGo 1.85m Outdoor Connectable Brown Stag Reindeer Figure Instructions
- June 12, 2024
- Festive Lights
Table of Contents
Festive Lights CG049M ConnectGo 1.85m Outdoor Connectable Brown Stag
Reindeer Figure Instructions
In the interest of the safe and proper use of this product, please read these instructions carefully and retain them for future reference.
General
- This product is only for use with product in out ConnectGo 31V connectable range.
- All products in this range come with weatherproof, 2 pin connectors, which will connect seamlessly with all items in the 31V system range.
- Check your power rating label for maximum LED quantity and power consumption of this product and do not exceed this maximum.
- Products in this 31V range are manufactured to IP44 standards allowing for indoor and seasonal outdoor use.
- Our 31V transformers boasts 8 different functions including: Combination, In Waves, Sequential, Slow-Glow, Flash, Slow Fade, Twinkling, and Steady On, depending on the power source chosen. Please note: when using any of the plug-in options the plug must be indoors, or in a suitable weatherproof enclosure. The 5m lead cable can be used outdoors.
Before you start
- Avoid using sharp-edged tools or mounting accessories (e.g. metal wires) to hang or fasten any part of your system.
- This product MUST NOT BE MODIFIED; if any modification is made i.e. cutting, extending lead wires, or using a different transformer than supplied, the warranty will be invalidated and may render the product unsafe.
- The LED bulbs used are designed for long life and are non-replaceable. Do not attempt to repair or replace them.
Assembly
- Connect the male and female connectors on the head and body of the deers ensuring correct polarity. Check the rubber ‘o’ ring is secure and tighten the screw cap over the connection ( as shown in images 1).
- Aline the hooks and spikes on the head and body to fix them in place ( shown in images 2 and 3).
- The final step is only applicable if you have either one of CG049 or CGOS1 male stags. connect the antlers to the top of the head (as shown in images 4).
The chart below shows what power source is compatible with each deer.
| PRODUCT CODE | PRODUCT NAME | POWERED BY |
|---|---|---|
| CG006 | CG004 | CGOOS |
| CG049M | 1.85m wicker stag, 400 LEDs | |
| CG049F | lm wicker doe, 350 LEDs | |
| CG049K | 75cm wicker fawn,120 LEDs | |
| CGOS1M | 1.4m stag, 250 white LEDs | |
| CGOS1F | 70cm doe, 200 white LEDs | |
| CG051K | 56cm fawn,100 white LEDs |
Fixing
- Before fixing, it is recommended that you test all products and check all connections are secure.
- Before connecting to an electricity supply, check that no wires are damaged and water seals (rubber “o” rings) are in place.
- Make sure you connect the power supply to a regular 240V socket, but do not switch on until all connections are complete.
- Carefully position cables to avoid a ‘tripping’ hazard and away from sources of direct heat.
Storage
- Note: the lifespan of this system is subject to the way in which it is handled. Make sure it is handled carefully during assembly, dismantling and storage.
- Dry thoroughly before storage, as damp can shorten the life.
Contact
For any technical information relating to this product, please email Festive Lights Ltd on contact@festive-lights.com. We aim to respond within 2 working days. Alternatively, contact our help line on (01257) 792111. This service is available between 9.00am – 5.00pm Monday to Friday
UK importer: Festive Lights Ltd, Preston Road, Charnock Richard, Chorley, Lancashire, PR7 5HH EU importer: Festive Lights BV, Utrechtseweg 341, 3818 EL Amersfoort, Netherlands
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>