Festive Lights OL049 Outdoor LED Battery Security Twin Head Spot Light with PIR Instructions
- June 12, 2024
- Festive Lights
Table of Contents
Festive Lights OL049 Outdoor LED Battery Security Twin Head Spot Light
with PIR
Interest Of Safe And Proper Use Of This Product
In the interest of safe and proper use of this product, please read these instructions carefully and retain them for future reference.
-
Remove the product from the packaging, taking care not to damage the wires, lights or decorations.
-
Installation: l. Loosen the screw at the bottom of the product to release the housing cover from the back of the product. 2. Fix the housing cover to the wall using the screws and wall plugs provided. For best results, select a location around 6-7 ft above the ground. At this level the motion detector range will be max. 26ft with a detection angle of 140°. The location should be away from other light sources and street lighting. 4. Remove the battery compartment cover at the rear of the product. 5. Insert the batteries (not included) in the directions indicated (+ / -) 6. Press the compartment cover into place until it clicks. 7. Re-attach the security light to the mounted rear housing cover by angling the bottom away cover and once engaged, angle the bottom of the fixture back towards the rear housing cover. 8. Hold in place and tighten the bottom screw on the fixture until it engages with the rear housing cover and holds the fixture in place.
-
To operate: l. Turn the control knob TIME to adjust the duration of the illumination. The lighting duration can be adjusted from approx. 3 seconds to 7 minutes (+/-10%). 2. Turn the control knob LUX to adjust the daylight level: When positioned to the ({ symbol, the motion detector will only react at night. In the ❖ position, the motion detector will respond at daylight levels.
-
This product MUST NOT BE MODIFIED. If any modifications are made, i.e.
cutting/extending lead wires, this will invalidate the warranty and may render the product unsafe. Do not position this product near any source of direct heat, do not connect the light set to the mains supply. -
This product is designed for decorative purpose only. Keep out of reach from children and animals.
-
This product is suitable for indoor and outdoor use although cannot be used, or submerged in liquid. If the product becomes damaged, the set must be disposed of accordingly.
Note: The LEDS in this light cannot be replaced. The life span of this product is subject to the way in which it is handled, during use and storage.
Made in China
UK importer: Festive Lights Ltd, Preston Road, Charnock Richard, Chorley,
Lancashire, PR7 SHH EU
importer: Festive Lights BY, Utrechtseweg 341, 3818 EL Amersfoort,
Netherlands
Contact
For any technical information relating to this product, please email Festive Lights Ltd on contact@festive-lights.com. We aim to respond within 2 working days. Alternatively, contact our help line on (01257) 792111. This service is available between 9.00am – 5.00pm Monday to Friday.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>