LEIFHEIT LinoProtect 400 Deluxe Rotary Washing Instructions

June 12, 2024
LEIFHEIT

LEIFHEIT logo Instructions for use
LEIFHEIT LinoProtect 400 Deluxe Rotary Washing LINOPROTECT 400
Deluxe Rotary Washing Instructions

LinoProtect 400 Deluxe Rotary Washing

Please read the instructions for use and save them.
You have decided on a first class rotary dryer by Leifheit. To ensure the high quality, each LinoProtect is individually tested in our production. You will find the production date and contact address at the top of the main shaft. In order to maintain the high quality of your LinoProtect in the long term, please see the subsequently described operating and care instructions.LEIFHEIT LinoProtect 400 Deluxe Rotary Washing -
Fig

Installation and Use

  1. Look for a place with sufficient space so that the rotary dryer can freely spin. Do not place it underneath trees. It is mandatory to use the provided Leifheit ground socket with a cover because only this mounting socket guarantees a dependable lift-off protection for the rotary dryer in windy conditions. Already existing Leifheit mounting sockets must be checked for damage and stable support before use, as well as the respective fit of the cover. Space requirements are provided on the packaging.
  2. Mix about 20 litres (2 buckets) of concrete with some water to make it slightly moist — 5 parts sand to 1 part cement. Set the mounting socket into the hole and fill the hole with the concrete.
  3. Make sure the mounting socket is centred and straight. Test this by inser-ting the clothes dryer and checking that it is vertical with a spirit level.
  4. The mounting socket should protrude enough to let you shut the cover.
  5. Let the concrete set for a few days (or according to the references on the concrete packaging).

LEIFHEIT LinoProtect 400 Deluxe Rotary Washing - Fig 1 Opening: The rotary dryer should be checked for damage prior to each use and must only be used if a flawless condition can be assumed. For your own safety, please pay attention to a secure footing before opening and that no items or obstacles are behind your back.

  1. Before opening, please ensure that the cover of the ground socket is locked into the respective counterpart on the main shaft.
  2. To open, please pull the tensioning line upwards at an angle.
  3. After overcoming the initial resistance, the roof and rotary can be opened in one operation until the desired line tension is reached.
  4. By pushing the gliding joint upwards, the washing lines can be re-tensi-oned if necessary.
  5. The tensioning knob can be fastened on the gliding joint.

LEIFHEIT LinoProtect 400 Deluxe Rotary Washing - Fig 2 Closing:

  1. Loosening the tensioning knob from its attachment.
  2. Unlatch the ratchet and guide it downwards over the last latch on the gliding joint.
  3. With the pull cord close the rotary dryer with one smooth movement while carefully stepping out of the closing range of the roof and ensure secure footing and a free area behind you.

LEIFHEIT LinoProtect 400 Deluxe Rotary Washing - Fig 3 Changing the rotary:

  1. Loosen re-tension loop on the 4 ends of the carrying arms.
  2. Loosen the screw on the rotary cover.
  3. Remove rotary cover.
  4. Remove roof.

Operating, care and safety instructions.

LEIFHEIT LinoProtect 400 Deluxe Rotary Washing -
Operating,

  1. Improper use is forbidden. Avoid being close to open fire. In strong wind (from wind force 6) and/or thunder storms, using the rotary dryer is not permitted. During hale and snow the rotary dryer should also not be used but safely stored instead. Please hang laundry only on the provided lines and not on the roof or the roof construction.
  2. The rotary dryer is not intended for use by children under 8 years of age, people with limited physical, sensory or mental abilities or in case of a lack of experience and/or knowledge, except when they are supervised by a person who is responsible for their safety or when they were instructed by this person on how the rotary dryer is to be used. Children must not play with the product.
  3. When hanging up laundry, turn the rotary dryer in the ground socket. This saves time and effort. Do not hang up the laundry one-sided or in strong wind. Use the rotary dryer only up to wind force 6. In addition, se-cure it with the integrated lift-off protection. For this, fasten the cover of the ground socket to the respective counterpart of the main shaft of the rotary dryer.
  4. Close the rotary dryer after each use and secure it with the rotary fas-tening strap. In this way the lines are protected and remain clean.
  5. In case the lines are jammed into the main shaft or the carrying arms during the opening/closing process: Carefully open the rotary dryer slightly and loosen the problematic part or alternatively open the rotary dryer com-pletely and close it once again.
  6. The rotary can be re-tensioned on the ends of the carrying arms.
  7. Transport the rotary dryer vertically or horizontally. Before transporting it, close and secure it with the provided rotary fastening strap. Only remove the rotary dryer from the ground socket when it is closed.
  8. In case the lines became wet, please let them dry when the rotary dryer is open. Then close the rotary as described before (see section “closing”).
  9. Care: a) Clean the main shaft from time to time, as well as the telescopic shaft with a moist cloth and a small amount of household cleaner. You should apply small amounts of a standard fully synthetic care spray onto a cloth and wipe the main shaft with it. (e.g. silicone spray) b) The fabric of the rotary is washable but it can also be cleaned with a moist cloth. c) Regularly clean ground socket with cover and lift-off protection from soil, sand and water. Please ensure that the lift-off protection on the main shaft is always freely rotatable.
  10. Store your rotary dryer in a dry place during winter. It is recommended that you store the rotary dryer upright in dry condition. Do not place it up-side down. Close the cover of the ground socket when removing the rotary dryer.
  11. Use of the small parts holder (Easy Clip) is forbidden because these are specifically made for Leifheit Linomatic-models.

WARRANTY CERTIFICATE

Dear Leifheit LinoProtect Customer, Leifheit AG grants a 3-year guarantee for the existing quality product from the date of purchase (or from receipt of the merchandise when ordering, respectively). The guarantee claims must be asserted immediately after the occurrence of a defect within the guarantee period. The guarantee extends to the condition of the products.
Exempt from guarantee is:

  1. normal wear and tear or other naturally caused wear deficiencies;
  2. Damage caused by improper use or handling (e.g. shock, impact, fall);
  3. Damage caused by non-compliance with the provided operating instruc-tions;

In case of a warranty claim, Leifheit guarantees at its own discretion, either the repair of defective parts or the exchange of the product. If a repair cannot be carried out and an identical product of this range is no longer available for exchange, you will receive an equivalent replacement product. Reimburse-ment of the purchase price is not possible in case of a warranty claim. Also, this guarantee does not grant any damage claims.
To make use of the guarantee, please contact the dealer from whom you bought the product and present the defective product and the sales receipt (copy). The guarantee is valid world-wide. Your statutory rights, especially guarantee rights, still apply for you and are not limited by this guarantee.
It is a mandatory prerequisite that you use the provided original Leif-heit ground socket or an existing ground socket with a cover! It is not permitted to use twist floor plug by Leifheit and foreign mounting so-ckets or plugs because the lift-off protection is not built-in. On demand, the Leifheit ground socket is available as an accessory part in shops or as a replacement part via the Leifheit customer service. Further information about guarantee can be found at www.leifheit.de.
Warranty only effective if the Leifheit ground socket with cover provided is used. White discolourations may appear on the ground sleeve hinge when attaching; these have no impact whatsoever on the function and durability of the lift-off protection.

https://www.leifheit.com/en-en/service/sustainability
Quality and Design by Leifheit AG
Leifheitstraße 1
56377 Nassau / Germany
www.leifheit.com

Documents / Resources

| LEIFHEIT LinoProtect 400 Deluxe Rotary Washing [pdf] Instructions
LinoProtect 400 Deluxe Rotary Washing, LinoProtect 400, Deluxe Rotary Washing, Rotary Washing, Washing
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals