LEIFHEIT 85285 LINOMATIC Easy 400 Rotary Washing Line Airer Dryer 40m Instruction Manual
- October 27, 2023
- LEIFHEIT
Table of Contents
LEIFHEIT 85285 LINOMATIC Easy 400 Rotary Washing Line Airer Dryer 40m
If the line becomes trapped between the plastic covers, carefully push it back through the round exit hole. Under no circumstances remove the plastic cover! If one of the lines gets wrapped around the base pole, a supporting arm or the cover, open the dryer slightly and return the line to its proper position. If the lines get wet, leave the dryer open so that they can dry.
WARRANTY CERTIFICATE
Dear Leaflet Kinematic Customer,
Congratulations on your purchase of a top-quality Leaflet rotary outdoor
dryer. We ensure the high quality of our Kinematic rotary dryers by inspecting
them individually during the production process and furnishing each one with
an inspection number. You will find the inspection number on the base pole,
approximately 50 cm above ground level. We recommend you to enter this
inspection number on the warranty certificate straight away. To ensure the
lasting high quality of your Cinematic, please observe the care instructions
overleaf. Keep this certificate in a safe place together with the purchase
receipt!
Leaflet -Kinematic inspection number
3 Year Guarantee
Leaflet offers a 3-year guarantee on this product. If a production defect is
discovered during the warranty period, we will repair it free of charge. This
only applies if you use the original Leaflet base socket which is delivered
with the product! You can also purchase the base socket, protective cover and
other accessories for your dryer as replacement parts from Leaflet
distributors.
Cut through fastening tape
Remove fastening tape and label completely!
Instructions for use
- Choose a sunny spot unobstructed by trees, bushes, fences, etc. The arms must be able to rotate freely. The space to allow is detailed on the packing.
- Dig a hole as shown.
- Mix about 20 liters (2 buckets) of concrete with some water to make it slightly moist – 5 parts sand to 1 part cement. Set the mounting socket into the hole and fill the hole with the concrete.
- Make sure the mounting socket is centered and straight. Test this by inserting the clothes dryer and checking that it is vertical with a spirit level.
- The mounting socket should protrude enough to let you shut the cover.
- Leave the concrete for a couple of days to set.
To open: Pull cord, which will retract automatically. By pushing the gliding
joint upwards, the washing lines can be re-tensioned if necessary.
To close: Push button and move arm downwards.
To close: Push button and move arm downwards.
Care and operating instructions
Find a sunny spot where your rotary outdoor dryer can rotate without obstruction. Do not position the dryer under trees. Use the Leaflet base socket that comes with the dryer.
Close the dryer after each use to ensure that the lines are protected and remain clean. Rotate the dryer in the base socket when hanging out washing to save time and effort. Spread washing evenly around the dryer – especially when the wind is stronger.
During winter, make sure that the rotary outdoor dryer is stored in a dry
place. Transport or store the dryer in an upright or horizontal position. Do
not turn it upside down. Close the lid of the base socket when you remove the
dryer.
Clean the base pole occasionally with a damp cloth and a little household
cleaner. You can also use small quantities of conventional fully-synthetic
care sprays on a cloth to rub the base pole clean. When the dryer is open, you
can spray a small quantity of care spray on the line retraction holes on the
support arms. Regularly remove earth, sand and water from the base socket.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>