AM PM I012707 Wall-Hung Rimless Toilet Set Instruction Manual

: June 12, 2024
: AM PM

Table of Contents

Safety instructions
Installation instructions
Product maintenance
Dimension
Tools
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AM PM I012707 Wall-Hung Rimless Toilet Set Instruction Manual

Safety instructions

For safe and proper functioning of the item as well as for avoidance of damage of Furniture and getting injury and maiming, we strongly recommend to follow all points of the instructions during installation.
Follow installation instructions step-bystep for exclusion on inaccuracy and errors as well as possible breakages of Furniture. Use services of Qualified Specialists.
Make sure that there are no currentcarrying and water supply parts at the spot of drilling of wall.
Before installation it is required to ensure that the item has no defects occurred while transporting andall component parts are available.
Claims for defects caused while transportating, damaged surfaces and absence of component parts are not accepted after installation;
It is required to follow installation requirements specified in the instructions;
Installation tools are not included into component kit;

We recommend to use sealants for purposes of hygiene and non-ingress of moisture under ceramics. Auxiliary materials (silicone, sealants, etc.) are purchased separately.

Installation instructions

Symbol
Carry out installation with the help of Qualified Specialists. For installation you will need: pen, tape ruler, level board, screwdriver+, crescent wrench SW 13, 17, 19 mm, drill, concrete bits 10 mm, silicone sealant.

In order to avoid premature failure of the valves is necessary to use a mechanical filter water treatment (not included).
Installation instructions

Product maintenance

Please, use soft cloth or sponge, soap solution and water for easy cleaning. Wipe surface with dry cloth after cleaning.
Please, use reduced impact detergents for deep cleaning, following the directions of shop instruction.
Please, do not use sponges with abrasive surface and solvents that damage surface.
Please, don’t use acid or alkaline liquid detergent to clean the product.
Damages resulted from incorrect maintenance are not warranty event.
System should be stored in the original package in a dry enclosed place minimum 0,5 m away from heat.

The installation should be carried out by a qualified professional.

Producer has a right to introduce change of component parts that has no effect on appearance and functionality of product. All parameters indicated in this instruction have formal meaning. Producer reserves the right for technical changes.